• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.10
• /
• pp.2589-2595
• /
• 2009

An electromagnetic pump has been designed using Load Distribution Method and Equivalent Circuit Method, and installed in a liquid metal flow system. The relation between the driving power of he electromagnetic pump and the flow rate was proposed. Also, the flow velocity and flow rate has been calculated by treating the Lorentz force as a source term in the Navier-Stokes equation. The calculation results were analyzed and compared with data from a commercial Code, FLUENT. They agreed well with each other within an error of 5%.

• Journal of Power Electronics
• /
• v.18 no.2
• /
• pp.573-587
• /
• 2018

Recently evolved power electronics' based domestic/residential appliances have begun to behave as single phase non-linear loads. Performing as voltage/current harmonic sources, those loads when connected to a three phase distribution network contaminate the line current with harmonics in addition to creating a neutral wire current increase. In this paper, an enhanced performance three phase four leg shunt active power filter (SAPF) controller is presented as a solution for this problem. The presented control strategy incorporates a hybrid predictive fuzzy-logic based technique. The predictive part is responsible for the SAPF compensating current generation while the DC-link voltage control is performed by a fuzzy logic technique. Simulations at various loading conditions are carried out to validate the effectiveness of the proposed technique. In addition, an experimental test rig is implemented for practical validation of the of the enhanced performance of the proposed technique.

• 한국초전도학회:학술대회논문집
• /
• v.9
• /
• pp.251-255
• /
• 1999

Local field distribution in the mixed state of type II superconductors has been numerically calculated and compared with $^{11}$B NMR spectra for YNi$_2B_2C$ single crystals. We find that only small distortion of vortex positions from the perfect lattice points is enough to smear out the low frequency shoulder. As the vortices are further distorted, the line shape changes from an asymmetric shape with a high frequency tail to a symmetric Gaussian line shape. It is found that the second moment of the field distribution has a major contribution from the high frequency tail. Consequently, a linewidth of the full width at half maximum calculated from the second moment assuming for a Gaussian line shape is overestimated.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.6
• /
• pp.1706-1712
• /
• 2014

The OH($X^2{\Pi}$, ${\upsilon}^{\prime\prime}=0,1$) internal state distribution following the reaction of electronically excited oxygen atom ($O(^1D_2)$) with cyclo-$C_3H_6$ has been measured using laser-induced fluorescence, and compared with that following the reaction of $O(^1D_2)$ with $C_3H_8$. The overall characteristics of the OH internal energy distributions for both reactions were qualitatively similar. The population propensity of the ${\Pi}(A^{\prime})$ ${\Lambda}$-doublet sub-level suggested that both reactions proceeded via an insertion/elimination mechanism. Bimodal rotational population distributions supported the existence of two parallel mechanisms for OH production, i.e., statistical insertion and nonstatistical insertion. However, detailed analysis revealed that, despite the higher exoergicity of the reaction, the rotational distribution of the OH following the reaction of $O(^1D_2)$ with $C_3H_8$ was significantly cooler than that with cyclo-$C_3H_6$, especially in the vibrational ground state. This observation was interpreted as the effect of the flexibility of the insertion complex and faster intramolecular vibrational relaxation (IVR).

• Journal of Mechanical Science and Technology
• /
• v.15 no.7
• /
• pp.965-973
• /
• 2001

It is well established that arteries are subjected to residual stress. Due to the effect of residual stress, the arteries open to a horse-shoe shape when a longitudinal cut is made on an excised arterial segment. Previously, the residual stress has been quantified by the opening angle of the horse-shoe shape. We have employed a finite element analysis of the open arterial segment to restore the same to the original cylindrical shape and computed the circumferential strain as well as the stress distribution in the wall. In this study, the stress distribution in the femoral arteries of miniswine was computed with and without the residual stress for a range of transmural pressures. Our analysis showed that the residual stress has the effect of redistribution of the circumferential stresses between the intima and the adventitia under physiological loading. The redistribution of the stress with the inclusion of residual stress may be important in the studies on effect of wall stresses on the endothelial and vascular smooth muscle cells.

• Mycobiology
• /
• v.36 no.4
• /
• pp.199-202
• /
• 2008

Inonotus obliquus is a fungus that causes white heart rot on several broad-leaved species. This fungus forms typical charcoal-black, sterile conks (chaga) or cinder conks on infected stems of the birche (Betula spp). The dark brown pulp of the sterile conk is formed by a pure mycelial mass of fungus. Chaga are a folk remedy in Russia, reflecting the circumboreal distribution of I. obliquus in boreal forest ecosystems on Betula spp. and in meridional mountain forests on beech (Fagus spp.) in Russia, Scandinavia, Central Europe, and Eastern Europe. Distribution at lower latitudes in Western and Southern Europe, Northern America, Asia, Japan, and Korea is rare. Infected trees grow for many years without several symptoms of decline. The infection can penetrate through stem injuries with exterior sterile conks developing later. In the Czech Republic, cinder conk is found on birches inhabiting peat bogs and in mountain areas with a colder and more humid climate, although it is widespread in other broad leaved species over the Czech Republic. The most common hosts are B. pendula, B. pubescens, B. carpatica, and F. sylvatica. Less frequent hosts include Acer campestre, Acer pseudoplatanus, Alnus glutinosa, Alnus incana, Fraxinus excelsior, Quercus cerris, Q. petraea, Q. robur, Q. delachampii, and Ulmus sp.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06c
• /
• pp.519-527
• /
• 1996

Most operation related to the application granular agrochemicals in korea are manual and labour consuming. As a multipurpose granular applicator, a pneumatic granular applicator that can be attached to conventional ride -on machines for paddy field was designed in this study. Experiments and simulations were carried out for determine in the design factors with one fertilizer (DongBu 21-17-17) and one pesticide (SamKong Ivi). The maximum terminal velocity of granular chemicals was estimated as 14.2m/s. A better distribution pattern was obtained at the diffuser having only deflectors without dividing guides. The diffuser spacing 1.0m for the fertilizer and the diffuser spacing 0.8m for the pesticide at the boom height over 0.80m were acceptable for the uniform distribution. In the case that the forward speed of ride-on machines was 0.7m/s, the groove opening and the roller speed of the selected metering device were13mm -15mm at 2 rps for the fertilizer, and 9 mm-11mm at 0.25rps or the pesticide. This study suggested a method of developing a pneumatic applicator for granular agrochemicals.

• Journal of Biosystems Engineering
• /
• v.42 no.3
• /
• pp.217-226
• /
• 2017

Purpose: Aedes aegypti and Aedes albopictus are notorious disease vectors that spread various viruses including dengue, yellow fever, chikungunya, and Zika. Recent Zika virus outbreaks were carried by Ae. aegypti, raising awareness about the perils of its global distribution. Because Ae. albopictus is spread throughout South Korea and can carry the same viruses as Ae. aegypti, monitoring potential distributions of Ae. albopictus and Ae. aegypti is necessary. Methods: In this study, the potential distributions of Ae. albopictus and Ae. aegypti in South Korea were modeled using CLIMEX software, and changes in response to climate change were predicted. Results: The results indicated that the climatic suitability for Ae. albopictus was consistently high, while occurrence of Ae. aegypti was only predicted for Jeju Island in 2080. Conclusions: The results provide basic information for preventing the invasion of Ae. aegypti, and consequent interactions between Ae. aegypti and Ae. albopictus, which may cause severe outbreaks of dangerous diseases.

• The Korean Journal of Ecology
• /
• v.18 no.1
• /
• pp.89-97
• /
• 1995

In order to study the successional trend and the heterogeneity of forest community, we investigated DBH frequency distribution of dominant tree species and the changes of several community indicies including ${\beta}-diversity\;({\beta}_t)$ along a belt transect in Mt. Yongam, Kwangnung Experimental Forest, which has been preserved for about 530 years. Quercus serrata, Carpinus laxiflora, and C. cordata were the three dominant species and their DBH frequency distribution showed a reverse J-shaped form, so these species seem to maintain by themselves. Dominancediversity curve had a lognormal distribution. d and H'for pooled quadrats were 0.13 and 1.09, respectively, but these indices within each quadiat varied with the range of 0.13 to 0.57 and 0.5 to 1.09, respectively. The value of ${\beta}_t$ along the belt transect ranged from 0.14 to 0.42. These results suggest that this forest community is in the stable climax stage but the components experience a heterogeneous microsuccession.

• Steel and Composite Structures
• /
• v.27 no.4
• /
• pp.525-536
• /
• 2018

This paper focuses on the application of the first-order shear deformation theory (FSDT) to thermo-elastic static problems of functionally graded carbon nanotubes reinforced composite (FG-CNTRC) cylindrical pressure vessels. A symmetric displacement field is considered as unknown function along the longitudinal direction, whereas a linear distribution is assumed along the thickness direction. The cylindrical pressure vessels are subjected to an inner and outer pressure under a temperature increase. Different patterns of reinforcement are applied as distribution of CNTs. The effective material properties of FG-CNTRC cylindrical pressure vessels are measured based on the rule of mixture, whereas the governing equations of the problem are here derived through the principle of virtual works. A large parametric investigation studies the effect of some significant parameters, such as the pattern and volume fraction of CNTs, on the longitudinal distribution of deformation, strain and stress components, as useful tool for practical engineering applications.