• 전자공학회논문지
• /
• 제52권10호
• /
• pp.3-10
• /
• 2015

본 논문에서는 비대칭 Slepian-Wolf 부호화에 극부호를 적용하는 방법을 고려하며, 부호율 적응성을 갖도록 극부호를 설계하는 방법을 제시한다. 제안된 극부호 기반 분산 소스 부호화에 연속제거 리스트 복호 기법을 적용하는 경우에 Slepian-Wolf의 한계에 매우 근접함을 확인하였으며, 이는 기존의 저밀도 패리티 검사 부호를 이용한 구현보다 현저하게 향상된 것이다.

• Journal of Power Electronics
• /
• 제16권2호
• /
• pp.731-747
• /
• 2016

The droop-based control strategy is widely applied in the interfacing inverters for distributed generation. This can be a problem since low-frequency stability issues may be encountered in droop-based microgrid. The objective of this paper is to classify, evaluate and compare various low-frequency damping methods. First, low-frequency stability problems are analyzed and an equivalent model of a droop-controlled inverter is investigated to classify the damping methods into the source-type damping strategies and the impedance-type damping strategies. Moreover, the lead-lag compensation network insertion control is proposed as a beneficial part of the source-type damping strategies. Then, the advantages and disadvantages of the different types of damping methods are theoretically evaluated and experimentally tested. Furthermore, the damping methods are comprehensively compared to illustrate the application field of each method. Finally, the synthesis of different damping methods to enhance the low-frequency stability is discussed and experimental validation is presented.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권11호
• /
• pp.4623-4643
• /
• 2015

This paper considers physical-layer security protocols in multicast cognitive radio (CR) networks. In particular, we propose dual-hop cooperative decode-and-forward (DF) and randomize-and-forward (RF) schemes using partial relay selection method to enhance secrecy performance for secondary networks. In the DF protocol, the secondary relay would use same codebook with the secondary source to forward the source's signals to the secondary destination. Hence, the secondary eavesdropper can employ either maximal-ratio combining (MRC) or selection combining (SC) to combine signals received from the source and the selected relay. In RF protocol, different codebooks are used by the source and the relay to forward the source message secretly. For each scheme, we derive exact and asymptotic closed-form expressions of secrecy outage probability (SOP), non-zero secrecy capacity probability (NzSCP) in both independent and identically distributed (i.i.d.) and independent but non-identically distributed (i.n.i.d.) networks. Moreover, we also give a unified formula in an integral form for average secrecy capacity (ASC). Finally, our derivations are then validated by Monte-Carlo simulations.

• ETRI Journal
• /
• 제42권3호
• /
• pp.341-350
• /
• 2020

In a wireless sensor network (WSN), the data transmission technique based on the cooperative multiple-input multiple-output (CMIMO) scheme reduces the energy consumption of sensor nodes quite effectively by utilizing the space-time block coding scheme. However, in networks with high node density, the scheme is ineffective due to the high degree of correlated data. Therefore, to enhance the energy efficiency in high node density WSNs, we implemented the distributed source coding (DSC) with the virtual multiple-input multiple-output (MIMO) data transmission technique in the WSNs. The DSC-MIMO first compresses redundant source data using the DSC and then sends it to a virtual MIMO link. The results reveal that, in the DSC-MIMO scheme, energy consumption is lower than that in the CMIMO technique; it is also lower in the DSC single-input single-output (SISO) scheme, compared to that in the SISO technique at various code rates, compression rates, and training overhead factors. The results also indicate that the energy consumption per bit is directly proportional to the velocity and training overhead factor in all the energy saving schemes.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 추계학술대회 논문집
• /
• pp.76-80
• /
• 2004

This paper describes a load simulator with power-recovery capability, which is based on the voltage source converter-inverter set. The load simulator described in this paper can save the electric energy that should be consumed to test the operation and performance of the distributed generation system and the power quality compensator. The load simulator consists of a converter-inverter set with a DSP controller for system control and PWM pulse generation. The converter operates as a universal load to model the linear load and the non-linear load, while the inverter feed the energy back to the power source with harmonic compensation. The load simulator can be widely used in the lab to test the performance of the distributed generation system and the power quality compensator.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제54권4호
• /
• pp.181-187
• /
• 2005

This paper describes a load simulator with power-recovery capability, which is based on the voltage source converter-inverter set. The load simulator described in this paper can save the electric energy that should be consumed to test the operation and performance of the distributed generation system and the power quality compensator. The load simulator consists of a converter-inverter set with a DSP controller for system control and PWM pulse generation. The converter operates as a universal load to model the linear load and the non-linear load, while the inverter feed the energy back to the power source with harmonic compensation. The load simulator can be widely used in the lab to test the performance of the distributed generation system and the power quality compensator.

• 한국정밀공학회지
• /
• 제18권1호
• /
• pp.187-194
• /
• 2001

The objective of this study is to develop a model for the grinding process for predicting the temperature, thermal stress and thermal deformation. The thermal load during grinding is modeled as uniformly distributed, 2D heat source moving across the surface of elastic half space, which is insulated or subjected to convective cooling. That non-dimensional temperature distribution, non-dimensional longitudinal stress distribution and non-dimensional thermal deformation distribution are calculated with non-dimensional heat source half width and non-dimensional heat transfer coefficient. Finite element models are developed to simulate moving heat source, which is modeled as uniformly or triangularly distributed, the FEM simulation is compared with numerical solution.

• 한국안전학회지
• /
• 제13권1호
• /
• pp.26-33
• /
• 1998

This paper subdivided the interior solid into triangular shape of equal size to calculate the temperature distribution around the square heat source of it, and compared calculated values with measured ones. The result obtained are as follows. 1) It was found that we can calculate the temperature distribution around the square heat source of interior solid by the variational method of the finite element method as the calculated values were almost accord with the measured ones. 2) The temperature distributed were higher when the distances between heat source were farther and lower when those nearer. 3) Vertical surface temperature distribution is remarkably efficient by thermal conductivities.

• 기술혁신학회지
• /
• 제5권2호
• /
• pp.212-227
• /
• 2002

This study reviews the institutional frameworks of Open Source software and develops the stylized facts of Open Source software innovation. Open Source software have to solve two difficult problems for encouraging innovation. First, the source code of Open Source software program should be open and freely distributed and it is very difficult for developers to appropriate the results of their investments. Second, as Open Source software development process is characterized by the participation of communities of developers, it is not easy to coordinate and manipulate the development process. These difficulties of developing Open Source Software have been solved by the particular incentive schemes and coordinating mechanisms. This study reviews the study on the motivation of Open Source software development and the mechanisms which coordinate innovation process of Open Source software with peer review and meritocracy, and how these characteristics promote innovation in Open Source software communities.

• 한국정보통신학회논문지
• /
• 제20권12호
• /
• pp.2267-2273
• /
• 2016

본 논문에서는 OSMU (One Source Multi Use) N-스크린 멀티캐스트 서비스를 위한 무선 통신 MAC 구조로서, WiMedia Distributed-MAC 프로토콜을 적용하였다. 그러나, 채널 에러율이 가변적인 무선 통신환경을 고려하면, N-스크린 고속 데이터가 손실될 가능성이 높다고 할 수 있다. 이러한 문제에 대해, WiMedia Distributed-MAC 프로토콜을 분석하여, 멀티캐스트 릴레이 기술을 제안하였다. 제안하는 멀티캐스트 릴레이 기술은 Multicast-free DRP Availability IE 기술과 결합되어, 멀티캐스트 통신에 대해 릴레이노드를 선정하고 에러율이 높은 채널을 회피하여 통신할 수 있다. 시뮬레이션을 통해 제안하는 멀티캐스트 릴레이 기술과 기존 WiMedia Distributed-MAC 멀티캐스트 기술을 멀티캐스트 노드 수에 따라 수율과 에너지 소모량을 비교 하였고, 다양한 BER (Bit Error Rate) 채널 환경에서 수율 성능을 비교하였다. 이를 통해, OSMU N-스크린 멀티캐스트 서비스에서 멀티캐스트 릴레이 기술이 적용되어야 함을 설명하였다.