• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회/대한산업공학회 2005년도 춘계공동학술대회 발표논문
• /
• pp.1124-1128
• /
• 2005

In this paper, a plan-coordination architecture is proposed for multi-agent control in the fractal manufacturing system (FrMS). A fractal in FrMS is a set of distributed agents whose goal can be achieved through cooperation, coordination, and negotiation with other agents. Since each agent in the FrMS generates, achieves, and modifies its own plan fragments autonomously during the coordination process with other agents, it is necessary to develop a systematic methodology for the achievement of global plan in the manufacturing system. The heterarchical structure of the FrMS provides a compromised plan-coordination approach, it compromise a centralized plan-generation/execution (which mainly focuses on the maximization of throughput) with a distributed one (which focuses on the autonomy of each module and flexibility of the whole system). Plan-coordinators in lower level fractal independently generate plan fragments according to the global plan of higher level fractal, and plan-coordinators in higher level fractal mediate/coordinate the plan fragments to enhance the global performance of the system. This paper assumes that generation method of the plan fragments and the negotiation policy of the fractal is achieved by a simple process, and we mainly focuses on the information exchanging and distributed decision making process to coordinate the combinations of plan fragments within a limited exchange of information.

• 대한기계학회논문집
• /
• 제17권12호
• /
• pp.3105-3114
• /
• 1993

previously, several basic studies in the experimental analysis of stress intensity factors of cracks by slab analogy have been presented by authors. But, for the application of above mentioned method to the analysis of the arbitrarily distributed cracks, there still is several bottlenecks to be overcome in terms of its experimental process and data treatment. Moreover, authors recently proposed an improved experimental method to use the fixed slab analogy device which has promised more accurate measurement of S.I.F. of small cracks. In this paper, for the completion of slab analogy analysis of distributed cracks, a grating imaginary rotation method is introduced. And, to prove its validity, this combined method is applied to the determination of stress intensity factors of theoretically known distributed cracks. The results show good agreement with the existing theoretical solutions and physical crack propagation tendencies.

• 한국항만학회지
• /
• 제13권2호
• /
• pp.289-302
• /
• 1999

As the size and complexity of network increase Distributed System Management (DSM) will be significant issue within information network in order to increase the high reliability and to improve the flexibility of network management. The OSI management model has several problems. The key problems are that it does not fully address the problem of how to develop communication protocol in support of DSM and how to classify the management connection criteria. In this paper to solve first problem described above this paper propose the connectionless CMIP to accomplish for effectively managing the distributed management managing systems to handle the dynamic informations. To work out second problem we introduce the connection criteria in the hierarchy of management system and finally evaluate the efficiency of a suggested protocol during cooperative negotiation among the managing system.

• 대한전기학회논문지:전력기술부문A
• /
• 제54권11호
• /
• pp.518-524
• /
• 2005

This paper presents an analytical method for the reliability evaluation of distribution system, including the distributed generations. Unlike the large sized generations of transmission system, the distributed generations have complexities in analyzing and determining the operation. In the process of evaluate reliability, it can be shown that the analytical method is simpler than the Monte-Carlo simulation and the method using Load Duration Curve model is more accurate than that using peak load model. The modeling of distributed generation to analysis distribution system reliability using LDC is proposed in this Paper, and is compared with the MCS method as a result of case studies.

• 통합자연과학논문집
• /
• 제7권1호
• /
• pp.1-4
• /
• 2014

Distributed Bragg reflector porous silicon of different characteristics were formed to determine their optical constants in the visible wavelength range using a periodic square wave current between low and high current densities. The surface and cross-sectional SEM images of distributed Bragg reflector porous silicon were obtained using a cold field emission scanning electron microscope. The surface image of distributed Bragg reflector porous silicon indicates that the distributions of pores are even. The cross-sectional image illustrates that the multilayer of distributed Bragg reflector porous silicon exhibits a depth of few microns and applying of square current density during the etching process results two distinct refractive indices in the contrast. Distributed Bragg reflector porous silicon exhibited a porosity depth profile that related directly to the current-time profile used in etch. Its free-standing film was obtained by applying an electro-polishing current.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.653-657
• /
• 2000

The paper describes the contents and results of the national project named "Development of Computer Integrated Product Design for Automation Equipment". It is focussed on the real-time control '||'&'||' monitoring of manufacturing process for automobile rubber parts. Automobile rubber parts industy is one of the typical process that high11 depends upon manufacturing facilities and equipments. So. it requires high cost and engineering technolog) on plant implementation. But most companies of rubber parts industries are small or mid companies that habe weak abilities for plant implementation properly and systematically. Therefore, for upgrading the levelof automation. it is necessar). to dekelope the computer based management and monitoring slsteni that enables to build-up the common base of automation and systemization. 'Through this project. we developed low cost real-time monitoring system for banbun mixing process '||'&'||' mold injection process of rubbcr parts manufacturing, that is composed with DDCU(Distributed Digital Control Unit),signal interfaces to gathering mon~toring terms and speciall\ developed functional sofhare including some algorithm for management '||'&'||' process monitoring

• 한국정밀공학회지
• /
• 제14권10호
• /
• pp.75-84
• /
• 1997

This paper describes the development of an integrating method for process planning and scheduling activities for block assembly in shipbuilding. A block is composed of several steel plates and steel sections with the predetermined shapes according to the ship design. The parts which constitute the block are manufac- tured by cutting and/or bending operations, which are termed as machining operation in this paper. The machining operation is the first process for block assembly which influences the remaining block assembly processes. Thus process planning and scheduling for machining operation to manufacture parts for block are very important to meet the assembly schedule in the shipyard. An integrating method for process plan- ning and scheduling is developed by introducing the concept of distributed process planning and scheduling composed of initial planning, alternative planning and final planning stages. In initial planning stage, nesting parts information and machining emthods are generated for each steel plate. In alternative plan- ning stage, machine groups are selected and workcenter dispatching information is generated. In final planning stage, cutting sequences are determined. The integrated system is tested by case study. The result shows that the integrated system is more efficient than existing manual planning system.

• 한국정보전자통신기술학회논문지
• /
• 제11권1호
• /
• pp.70-75
• /
• 2018

스마트 팩토리는 설계 개발, 제조, 유통 물류 등 생산 전체 과정에 정보 통신 기술을 적용하여 생산성, 품질, 고객만족도 등을 향상시킬 수 있는 지능형 공장이다. 스마트 팩토리에서 발생되는 데이터의 양은 공장의 규모 및 시설 수준에 따라 많은 차이를 보이지만, 기존의 생산관리시스템을 활용하여 방대한 양의 데이터를 발생시키는 스마트 팩토리 환경에 적용하기에 어려움이 있다. 이로 인해 방대한 양의 빅데이터 처리할 수 있는 빅데이터 분산 처리 시스템의 필요성이 요구되고 있다. 따라서 본 논문에서는 스마트 팩토리 환경에서의 GlusterFS 기반 빅데이터 분산 처리 시스템 설계하였다. 제안하는 빅데이터 분산 처리 시스템은 기존 분산 처리 시스템에 비해 네트워크 트래픽 분산 및 관리를 통해 부하와 데이터 소실 위험도를 감소시켰다.

• 정보과학회 논문지
• /
• 제43권10호
• /
• pp.1131-1143
• /
• 2016

수십억 개 간선들로 구성된 대용량 그래프를 어떻게 효과적으로 압축할 수 있을까? 정점 재배치를 통해 인접 행렬의 0이 아닌 값들을 집중시키면 그래프를 효율적으로 압축할 수 있을 뿐 아니라 페이지랭크 등 여러 그래프 마이닝 알고리즘의 수행 속도를 개선할 수 있다. 최신 정점 재배치 기법인 SlashBurn은 실세계 네트워크의 멱법칙 특성을 활용하는 실세계 그래프에 효과적인 방법이다. 하지만 단일 머신 기반으로 설계되어 대용량 그래프에 대해 처리 속도가 현저히 느려지거나 적용이 불가능한 한계가 있다. 본 논문에서는 이러한 한계를 극복하기 위한 분산 SlashBurn을 제안한다. 분산 SlashBurn은 대규모의 정점 재배치 프로세스를 분산 처리하여 대용량 그래프를 기존 방법보다 훨씬 빠르고 확장성 있게 처리한다. 대용량 실세계 그래프들에 대한 실험 결과, 분산 SlashBurn은 단일 머신 SlashBurn보다 45배 이상 빠르게 동작하였고, 16배 이상 큰 그래프를 처리할 수 있었다.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제28권12호
• /
• pp.896-909
• /
• 2001

현재 새롭게 개발되는 소프트웨어는 50% 이상이 분산 플랫폼에서 개발되고 있다. 또한 분산 컴포넌트 기반의 소프트웨어 개발을 가능하게 하는 EJB(Enterprise Java Beans)[1] COM(Component Object Model )[2]. CORBA(Common Object Request Broker Architecture)[3] 와 같은 기술이 급격히 발전하고 있다. 따라서 분산 플랫폼 상에서 컴포넌트 기반의 응용 소프트웨어 개발을 위한 체계적인 개발 프로세스가 요구된다. 그러나 현재의 일반적인 컴포넌트 기반 소프트웨어 개발 방법론은 각 작업들간의 관 계와 각 작업의 산출물간의 관계를 명확히 제시하지 않는다. 또한 분산 응용 소프트웨어 개발에 있어서 고려되어야 할 분산 이슈에 대해서도 체계적으로 다루지 않고 있다. 본 논문에서는 분산 컴포넌트 기반의 응용 소프트웨어 개발을 위한 분석 및 설계 방법을 제시한다. 본 논문에서 제시하는 방법에서는 UMI 기반의 프로세스인 Unified process를 바탕으로 하여 체계적인 개발 지침과 산출물의 관계를 제시한다 또한 플랫폼과 프로그래밍 언어에 독립적인 CORBA 환경을 고려하여 성능. 결함 방지, 안전성, 분산 트랜잭션의 분산 이슈를 명시적으로 다루는 지침을 제시한다.