• KIPS Transactions on Computer and Communication Systems
• /
• v.3 no.11
• /
• pp.403-408
• /
• 2014

In the Internet of Things(IoT) era, many of the things or objects that enclose our environments are able to associate with those things on the Internet. To construct IoT systems, it needs to consider a component for acquiring and aggregating of sensory data via things with sensors and instruments, which is connected by diverse networks, in IoT environment. An IoT system is intrinsically distributed in a variety of ways. In addition, to manage an IoT system efficiently, interoperability is needed to meet requirements while the IoT system is designed to deliver data among its applications. In this paper, a reference architecture based on asynchronous messaging is defined and used for designing an IoT system. To apply the architecture, we discuss how to manage data streams with real-time characteristics and make a prototype based on pipe-and-filter to produce and consume them by a pub/sub messaging system NaradaBrokering.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.4
• /
• pp.469-475
• /
• 2021

In order to effectively maintain and manage river facilities, on going data collection of associated objects is important. However, the existing data acquisition methods of using a total station, a global navigation satellite system, or a terrestrial laser scanner have limitations in terms of cost/time/manpower when acquiring spatial information data on river facilities distributed over a wide and long area, unlike general facilities. In contrast, a mobile mapping system (MMS), which acquires data while moving its platform, acquires precise spatial information data for a large area in a short time, so it is suitable for use in the maintenance of linear facilities around rivers. As a result of applying a MMS to a research area of 4 km, 184,646,099 points were acquired during a 20-minute data acquisition period, and 378 cross-sections were extracted. By comparing this with computer-drawn river plans, it was confirmed that efficient levee management using a MMS is possible.

• The Journal of the Korea Contents Association
• /
• v.21 no.10
• /
• pp.264-273
• /
• 2021

To study how digital content can be effectively developed and transformed in a post-COVID world in which the normal operations of museums have been disrupted, this paper analyzes the rapid development and limitations of VR exhibitions and proposes, as an alternative, the development of AR exhibitions. Studying VR/AR exhibitions that ran before and after COVID-19, this paper finds that VR, on the one hand, translates physical objects into digital video, which lacks aesthetic depth, and encounters operational problems originated by devices. By using mobile devices that are widely distributed and convenient to use, AR exhibitions can, on the other hand, be divided into three types: "museum-specific exhibitions" can present digital content in a specific indoor space, while "place-specific exhibitions" can be used in open outdoor spaces. The "non-place-specific exhibitions", can, as third type, combine digital content with printed material sent by postal mail. Among these three types, the specific/unspecified place type shows the highest "uncontact effect," which can suggest the best direction for effective museum content development in the pandemic era.

• Journal of Korean Society of Archives and Records Management
• /
• v.23 no.4
• /
• pp.159-178
• /
• 2023

A digital archive is an online platform for preserving and utilizing digital records worthy of continued preservation. However, there are no shared standards for functionality, metadata, or data technical principles across digital archives in Korea. These issues create challenges in linking distributed digital records. This study proposes a common vocabulary for digital archives to enhance the interoperability of digital records and evaluates the interoperability of the digital archive built with the common vocabulary. We collect and analyze data from the digital archive on the Korean financial crisis of 1997 to construct a knowledge graph and compare its interoperability with the knowledge graph built with RiC-O. The archive and the knowledge graph underwent evaluation using the FAIR data principles evaluation framework. The constructed knowledge graph links various objects in the archive and provides contextual information to aid in understanding the archive. The results demonstrate that a knowledge graph built with a common vocabulary significantly improves the linkage, search, and interoperability of digital records compared to a traditional archive.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.31 no.3
• /
• pp.83-94
• /
• 2013

The purpose of this study is to offer basic data about prototype conservation of the Orijangnim, natural monument No. 404. For this study, March to August 2010, was a literature surveys and field research, and based on this, the Delphi survey of local residents and experts meeting were diagnosed with forest back ground, spatial extent, in the form of forests, flora and vegetation of the surrounding area, so examined closely the original form. Range of the Orijangnim was presumed from Jacheon middle school entrance($N36^{\circ}05^{\prime}59.9^{{\prime}{\prime}}/E128^{\circ}54^{\prime}32.9^{{\prime}{\prime}}$) to Odong of Hwabukmyeon village entrance($N36^{\circ}05^{\prime}31.0^{{\prime}{\prime}}/E128^{\circ}54^{\prime}32.5^{{\prime}{\prime}}$). The Orijangnim in the original form of the existing forest surrounding the village along gohyeon river going back a long S-shaped about 2km is considered. The investigated vascular plants consist of total 198 taxa : 2 forms, 20 varieties, 179 species, 152 Genera, 72 Families. Most of the 60 kinds of large land plants lots of whole plants accounted for 33.3%. A main vegetation of the Orijangnim have been distributed 473 objects of 21 species, and evergreen conifers is 19% to 92 objects, on the other hand, deciduous broadleaf tree is 79% to 373 objects, so the Orijangnim can be maxed forest that deciduous broadleaf tree is dominant. When consider the composition purpose of forest, environment of location, tree size, surrounding flora and vegetation, because an original vegetation of Orijangnim is suggested Zelkova serrata, Salix glandulosa, Celtis sinensis Pers., Quercus variabilis, Quercus acutissima , Sophora japonica L., Cornus walteri Wanger. we must restore around such species of tree. Cedrus deodara (Roxb.) Loudon, Chaenomeles sinensis, Prunus yedoensis Matsum., Ginkgo biloba , Pinus thunbergii Parl., Populus tomentiglandulosa T. Lee is considered to have been planted in the last.

• Journal of Korean Society of Forest Science
• /
• v.2 no.1
• /
• pp.59-65
• /
• 1962

The objects of this experiment are to find out the local variation of the Dendrolimus Spectabilis Butler, of which sample was first collecteted 15 bodies of male and 35 bodies of female adult at Suwon area. the wing veins and the scale shape have been observed through the microscope (100) and the scale size (from the bottom of the scale to the top of the lobe) has also been measured by the micrometer. The results of this experiment are as follows: 1. There is nodifference between the venation of the male body and that of the female body. Also we can not find any differences between the right and the left wing, and between each body. The fore wings consit of 13 longitudinal veins and the only one "V" shape cross vein which is between the 5th and 6th vein. The hind wings consist of 9 longitudinal veins and the only one "V" shape cross vein which is mentioned above. 2. The scale types are divided into 4 Groups in its shape. (A) The scales of I Group are short and the lower parts of them almost look like a circle, having a small projection at their bottom. The upper parts of them have 2 or 10 lobes. We can find the lobes with fine hairs or the lobes without them at the top of the scales. (B) The scales of II Group are longer than that of I Group. The shape of the lower parts of the scales is similar to that of I Group. The upper parts of the scales have 2 or 10 lobes. (C) The scales of III Group are long and almost alike in a long wedgeshape. The upper parts of the scales have 2 Or IO lobes and we can find long fine hairs at the top of each lobe. (D) The scales of IV Group are long and the shape of the lower parts of the scales is similar to that of III Group. The lobes are short and not sharp. We can find 2 or 9 lobes. 3. The scales of I Group and II Group are distributed on the whole surface except on the outer margin. The most scales of III Group are distributed on the wing base. The scales of IV Group are distributed on the outer margin only. The scales with 4 or 5 lobes are most widely distributed not considering their Group or distributing parts. 4. In I Group the variation of the scale length become gradually greater as the number of the lobes are increasing. In II, III, IV Group, however, the variation of the scale length is in direct opposition to the above mentioned. The variation of the scale width becomes pretty small in any Groups and the scale width become wider as the number of the lobes are increasing. 5. The source of the wing colouration is pigmnetal colour, and the wing colouration is expressed by the amount of brown and white scales.

• Journal of Internet Computing and Services
• /
• v.6 no.6
• /
• pp.85-97
• /
• 2005

In this paper, we construct the traffic information database by using the acquired data from the traffic information devices installed in road network, and, by referring to this database, propose the intersection simulation system which can dynamically manage the real-time traffic flow for each section of road from the intersections, This system consists of hierarchical 3 parts, The lower layer is the physical layer where the traffic information is acquired on an actual road. The traffic flow control framework exists in the middle layer. The framework supports the grouping of intersection, the collection of real-time traffic flow information, and the remote monitoring and control by using the traffic information of the lower layer, This layer is designed by extending the distributed object group framework we developed. In upper layer, the intersection simulator applications controlling the traffic flow by grouping the intersections exist. The components of the intersection application in our system are composed of the implementing objects based on the Time-triggered Message-triggered Object(TMO) scheme, The intersection simulation system considers the each intersection on road as an application group, and can apply the control models of dynamic traffic flow by the road's status. At this time, we use the real-time traffic information collected through inter-communication among intersections. For constructing this system, we defined the system architecture and the interaction of components on the traffic flow control framework which supports the TMO scheme and the TMO Support Middleware(TMOSM), and designed the application simulator and the user interface to the monitoring and the controlling of traffic flow.

• Journal of Internet Computing and Services
• /
• v.16 no.3
• /
• pp.43-57
• /
• 2015

In this thesis was conducted to propose a method for efficient information retrieval using concept lattices. Since this thesis designed a new system based on ordinary concept lattices, it has the same approach method as ontology, but this thesis proposes new concept lattices to be used by establishing collaborative relations between objects and concepts that users are likely to search information more efficiently. The system suggested by this thesis can be summarized as below. Firstly, this system leads to a collaborative search by using Three kinds of concepts, such as keyword concept lattices, which focus on input key words, expert concept lattices recommended by experts and theme concept lattices, and based on these 3 concept lattices, it will help users search information they want more efficiently. Besides, as the expert concept and the keyword concept become combined, further providing users with the frequency of keyword and the frequency of category, this system can function to recommend key words related to search words entered by users. Another function of this system is to inform users of key words and categories used in users' interested themes by using the theme concept lattices. Secondly, when there is not keyword entered by a user, it is possible for users to achieve the goal of search through the secondary search when this system provides them with key words related to the input keyword. Thirdly, since most of the information is managed while being dispersed, such dispersed and managed information not only has different expression methods but changes as time goes. Accordingly, By using XMDR for efficient data access and integration of distributed information, this thesis proposes a new technique and retrieval system to integrate dispersed data.

• Archives of design research
• /
• v.20 no.3 s.71
• /
• pp.119-128
• /
• 2007

With the development of digital technologies, CAID became an essential part in the industrial design process. Creating photo-realistic images from a virtual scene with 3D models is one of the specialized task for CAID users. This task requires a complex interface of setting the positions and the parameters of camera and lights for optimal rendering results. However, the user interface of existing CAID tools are not simple for designers because the task is mostly accomplished in a parameter setting dialogue window. This research address this interface issues, in particular the issues related to lighting, by developing and evaluating TLS(Tangible Lighting Studio) that uses Augmented Reality and Tangible User Interface. The interface of positioning objects and setting parameters become tangible and distributed in the workspace to support more intuitive rendering task. TLS consists of markers, and physical controller, and a see-through HMD(Head Mounted Display). The user can directly control the lighting parameters in the AR workspace. In the evaluation experiment, TLS provide higher effectiveness, efficiency and user satisfaction compared to existing GUI(Graphic User Interface) method. It is expected that the application of TLS can be expanded to photography education and architecture simulation.

• Korean Journal of Human Ecology
• /
• v.19 no.1
• /
• pp.203-214
• /
• 2010

This study will examine the current condition of outdoor play in child care centers and the overall perception of teachers on outdoor play in regards to its related programs and children's reaction to them. Through examining such issues, this study will provide the basic data that can be applied in planning appropriate outdoor play activities, programs and environments. For the study, we surveyed teachers and directors of child care centers using a structured questionnaire. The objects of the survey were 22 child care centers in Daejeon and Seoul, who agreed to conduct the survey. The survey was conducted from August 1 to September 30 2006; 220 copies were distributed, and 188 copies were collected. The results of the study can be summarized as follows: 1) The number of outdoor plays per week were on average 1~2 in most cases, although teachers believed the play should be done everyday. Outdoor play time was mostly 21~30 minutes, while teachers thought 31~40 minutes as appropriate. Children's reaction scored the highest when they played outdoors for 30 minutes every day with their teachers involved in the play. As a result, we have concluded that the appropriate outdoor play should be conducted everyday for 30~40 minutes. 2) Outdoor play was mostly conducted as part of the overall educational plan rather than a separate plan. Since outdoor play affects children's development as much as indoor play, there is a need for development of a specific and separate plan for various outdoor play programs. 3) The outdoor play program that was most often conducted was equipment play and sand play. This indicated the monolithic nature of the outdoor program. Given the fact that children enjoy outdoor plays a lot (M=4.71), various programs including adventure play, sensitive play, and carpenter play should be developed. 4) In outdoor play, the teacher's role included supervising and interacting with children. According to the survey, teachers had a good understanding of the importance on safety and supervising issues in outdoor plays. However they seemed to overlook the importance of having better programs and improving teacher's participation to the play. Despite the importance of outdoor play to children's development, the result shows that teachers have tendencies to limit and obstruct outdoor plays by emphasizing supervising and safety issues instead. 5) Children's safety should not be the only consideration for outdoor plays; teachers ought to better understand that children's development can be maximized by the play. Furthermore, there should be emphasis placed on the program development and teacher's participation; teacher's participation should actively encourage the interactions between a child and a teacher, as well as among children.