• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2008년도 추계학술대회 논문집
• /
• pp.64-67
• /
• 2008

To detect islanding mode when the grid is being tripped is a major safety issue in the Utility Interactive Distributed Generation (UIDG) system. In this paper, analytical design method is suggested for AFD & RPV method under IEEE929-2000 recommended islanding test condition. We have discussed that there is a same point. we injected reactive component of the current by AFD & RPV methods, but the current reference generated is other waveform. Possible if amount of reactive components in this methods are same each method, there is happened same rates frequency variation. To verify the validity of the analytical comparison, this paper presents simulation and experimental results from single phase, 3[kW] inverter for the transformerless UIDG system.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.528-530
• /
• 2008

The effect of consolidation temperature on the microstructure, density and mechanical properties (especially, wear property) of $Al_{92.5}-Fe_{2.5}-Cr_{2.5}-Ti_{2.5}$ alloy fabricated by gas atomization and magnetic pulsed compaction was investigated. All consolidated alloys consisted of homogeneously distributed fine-grained fcc-Al matrix and intermetallic compounds. Relative higher mechanical properties in the MPCed specimen were attributed to the retention of the nanostructure in consolidated bulk without cracks. The as consolidated bulk by magnetic pulsed compaction showed the enhanced wear properties than that of a general consolidation process. In addition, the wear mechanism and fracture mode of MPCed bulk was discussed.

• 한국정밀공학회지
• /
• 제21권5호
• /
• pp.142-148
• /
• 2004

In this paper, to detect exciting frequency on the latticed fence structure, fiber optic sensor using Sagnac interferometer was fabricated and tested. The latticed structure fabricated with dimension of 180 cm wide and 180 cm high, the optical fiber, 50 m in length, distributed and fixed on the latticed structure. Single mode fiber, a laser with 1,550 m wavelength, and $3{\times}3$ coupler were used. Excited vibration signal applied to the latticed structure from 200 Hz to 1 KHz. The detected optical signals were compared to the detected acceleration signals and analyzed on the time and frequency domain. Based on the experimental results, fiber optic sensor using Sagnac interferometer detected exciting frequency, effectively. This system can be applied to the structural health monitoring system.

• 한국멀티미디어학회논문지
• /
• 제17권5호
• /
• pp.573-581
• /
• 2014

The salient features of UWB(Ultra WideBand) networks such as high-rate communications, low interference with other radio systems, and low power consumption bring many benefits to users, thus enabling several new applications such as wireless universal serial bus (WUSB) for connecting personal computers (PCs) to their peripherals and the consumer-electronics (CE) in people's living rooms. Because the size of multimedia data frame, WiMedia device must transmit the fragment of MSDU. However, when the fragment of MSDU is lost, WiMedia device maintains active mode for the time to complete the transmission MSDU, and there is a problem that unnecessary power consumption occurs. Therefore we propose new power management scheme to reduce unnecessary power consumption of WiMedia devices in the case that the fragment is lost.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.597-601
• /
• 2008

Three-dimensional structures of detonation wave propagating in circular tube were investigated. Inviscid fluid dynamics equations coupled with a conservation equation of reaction progress variable were analyzed by a MUSCL-type TVD scheme and four stage Runge-Kutta time integration. Variable-$\gamma$ formulation was used to account for the variable properties between unburned and burned states and the chemical reaction was modeled by using a simplified one-step irreversible kinetics model. The computational code was parallelized based on domain decomposition technique using MPI-II message passing library. The computations were carried out using a home made Windows based PC cluster having 160 AMD AthloxXP and Athlon64 processor. The computational domain consisted of through a roundshaped tube with wall conditions. As an initial condition, analytical ZND solution was distributed over the computational domain with disturbances. The disturbances has circumferential large gradient. The unsteady computational results in three-dimension show the detailed mechanisms of multi-cell mode of detonation wave instabilities resulting diamond shape in smoked-foil record.

• 한국광학회지
• /
• 제14권3호
• /
• pp.219-223
• /
• 2003

광섬유의 잔류응력(residual stress)을 측정하기 위해 위상보정 편광기(polariscope)를 새롭게 구성하고, 간섭이나 회절에 대한 영향을 최소화시키면서 빠르고 정확하게 측정하는 방법을 제시하였다. 이 방법을 이용하여 일반 광섬유의 잔류 응력 분포를 측정할 수 있었다. 또한 광섬유의 잔류응력이 모재의 잔류응력분포와 달리 인출 시 발생하는 광섬유 내 온도의 냉각곡선에 밀접한 관계를 갖고 있음을 알 수 있었다.

• Journal of Information Processing Systems
• /
• 제17권6호
• /
• pp.1044-1056
• /
• 2021

Globalization has integrated the world through interaction among countries and people with the help of information and telecommunication technology (ICT). The rapid mode of globalization has put a new life in ICT and economic sector. The key focus of this study is to examine the nexus among the globalization, ICT and economic growth. This study uses autoregressive distributed lag model (ARDL), vector error correction model (VECM) and econometric method spanning from 1990 to 2015. The empirical result highlights that the globalization stimulates economic growth of a country. In addition, both the internet penetration and the mobile phone usage contribute to the economic growth. Lastly, this article contributes important policy lessons on strengthening the economy by utilizing ICT with the rapid globalization.

• 한국공간구조학회논문집
• /
• 제24권1호
• /
• pp.37-45
• /
• 2024

Steel plate shear walls (SPSWs) have been recognized as an effective seismic-force resisting systems due to their excellent strength and stiffness characteristics. The infill steel plate in a SPSW is constrained by a boundary frame consisting of vertical and horizontal structural members. The main purpose of this study was to investigate deformation modes and hysteretic characteristics of steel plate shear walls (SPSWs) to consider the effects of their aspect ratios and width-to-thicness ratios. The finite element model (FEM) was establish in order to simulate cyclic responses of SPSWs which have the two-side clamped boundary condition and made of conventional steel grade. The stress distribution obtained from the FEA results demonstrated that the principal stresses on steel plate with large thickness-to-width ratio were more uniformly distributed along its horizontal cross section due to the formation of multiple struts.

• 정보처리학회논문지C
• /
• 제14C권6호
• /
• pp.519-524
• /
• 2007

제한된 자원을 가진 센서 노드들로 구성된 센서 네트워크에서 가장 중요한 이슈 중 하나는 주어진 에너지를 최대한 활용하여 네트워크 수명을 연장하는 것이다. 네트워크 수명을 연장하는 가장 대표적인 방법은 클러스터링 방법이며, 이는 단일홉 모드와 다중홉 모드로 분류된다. 단일홉 모드는 클러스터 내의 모든 센서 노드들이 CH(Cluster Head)와 단일홉 통신을 하는 것을 말하며, 반면 다중홉 모드는 중간 노드들의 중계를 통하여 센서 노드와 CH가 통신하는 방식을 말한다. 기존의 다중홉 클러스터링 방식에서 성능 상 가장 중요한 영향을 미치는 요소는 클러스터 크기이며, 노드의 분포가 균일하다고 가정하였다. 그러나 실제 네트워크에서의 노드 분포는 균일하지 않을 수 있으므로 이러한 환경에서의 최적의 클러스터 크기 계산은 아주 어렵다. 본 논문에서는 싱크 주변의 CH에 대한 트래픽 부하를 줄이기 위하여 싱크로부터의 거리를 기반으로 클러스터 크기를 동적으로 변화시키는 다중홉 클러스터링 방법을 제안한다. 또한 수학적 분석과 시뮬레이션을 통하여 제안된 동적크기 클러스터링 방식이 기존의 고정크기 클러스터링 보다 더 나은 성능을 가짐을 보였다.

• 한국양식학회지
• /
• 제20권4호
• /
• pp.232-238
• /
• 2007

득량만에서 생산되는 키조개 Atrina pectinata 성체와 부유유생의 출현 분포를 조사하였다. 채집시기별 정점에 따른 키조개의 출현량은 8월에 만의 가장 안쪽 정점 G1에서 18개체/$m^2$로 가장 많이 출현하였고, 전중량은 11월에 정점 G1에서 $2,790\;g/m^2$으로 가장 높았다. 수심이 낮은 내만과 서쪽 해역은 수심이 깊은 만 입구와 동쪽해역에 비하여 자원량이 많았다. 키조개 유생 출현량은 8개체/$m^3$ 이하로 매우 적었다. $7{\sim}8$월의 경우, 음력 $3{\sim}4$일경을 중심으로 유생 출현량이 peak를 이루는 경향을 보였으며, $9{\sim}10$월에는 유생 출현량이 크게 감소하였다. 유생의 경우도 수심이 낮은 만의 안쪽과 득량도 서쪽 해역이 수심이 깊은 만입구와 동쪽해역에 비해 출현량이 많았다. 득량만에서의 키조개 유생의 출현량은 자원량에 비하여 매우 낮은 결과를 보였다. 그러나 자원량과 유생의 지리적 분포 특성은 서로 유사한 결과를 보였다. 수심이 낮고 육수의 유입이 많으며 유속이 약한 내만은 키조개 모패 자원량이 풍부할 뿐만 아니라, 산란된 유생이 분산되지 않아 유생의 서식과 성장에도 가장 적합한 해역이었다.