• Journal of Arbitration Studies
• /
• v.28 no.1
• /
• pp.125-151
• /
• 2018

Rapid industrial growth based on massive fossil fuel energy consumption has caused serious damages on natural environment and every aspects of human life. As demands for clean and pleasant living circumstance increases, conflicts and disputes around environmental problems have also been widespread. Given the 'environmental rights' is a relatively new legal concept, however, resolving environmental disputes through the traditional legal principles and litigation procedures could be restrictive and, in some sense. inefficient as well as expensive. With efforts to develop new legal principles on environmental disputes, the environmental dispute adjustment system has been introduced as an alternative dispute resolution to the traditional legal dispute procedures. The Korean Environmental Dispute Resolution Commission introduced as the environmental dispute adjustment system has been well established for the past twenty-seven years, given the steadily increasing numbers of applications to the Commission over environmental disputes. However, as most cases are still small in money terms and mainly subject to adjudication, the effectiveness and practical contribution of the Commission in the resolution of environmental disputes have in fact been limited. For the enhancement of the status and roles of the Commission as the prior instrument of the alternative dispute resolution(ADR) in environmental disputes, several suggestions could be considered as follows: First, mediation needs to be more activated than adjudication in order to meet the primary purpose of ADR that resolves environmental disputes according to free will of concerned parties. Second, the scope of mediation could be expanded to the areas including potential environmental damages. Third, the roles and responsibilities of the Environmental Dispute Resolution Commissions at both central and local levels need to be evenly distributed. Fourth, the mechanism and procedures of environmental dispute resolution should be standardized. Fifth, the status of the Environmental Dispute Resolution Commission could be elevated in rank by shifting its current affiliation from the Ministry of Environment to the Office of Prime Minister. Sixth, the organizational structure and human resources of the Commission need to be reinforced. Seventh, the current situation that tends to give priority to litigation procedures when an environment dispute is simultaneously pending in litigation and mediation should be eased and properly adjusted. Eighth, the adoption of mandatory mediation in advance to litigation needs to be discussed. Ninth, the legal authority of the Commission's decisions should be further guaranteed. If above suggestions are thoroughly reviewed and properly adopted, the roles, authority and power of the Environmental Dispute Resolution Commission would be increased in the era when environmental conflicts get widespread, requiring an effective alternative environmental dispute resolution mechanism.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.3
• /
• pp.623-628
• /
• 2009

The emergence of compact and low-power wireless communication sensors and actuators in the technology supporting the ongoing miniaturization of processing and storage allows for entirely the new kinds of embedded systems. These systems are distributed and deployed in environments where they may have been designed into a particular control method, and are often very dynamic. Collection of devices can communicate to achieve a higher level of coordinated behavior. Wireless sensor nodes deposited in various places provide light, temperature, and activity measurements. Wireless sensor nodes attached to circuits or appliances sense the current or control the usage. Together they form a dynamic and multi-hop routing network connecting each node to more powerful networks and processing resources. Wireless sensor networks are a specific-application and therefore they have to involve both software and hardware. They also use protocols that relate to both applications and the wireless network. Wireless sensor networks are consumer devices supporting multimedia applications such as personal digital assistants, network computers, and mobile communication devices. Wireless sensor networks are becoming an important part of industrial and military applications. The characteristics of modem embedded systems are the capable of communicating adapting the different operating environments. In this paper, We designed and implemented sensor network system which shows through host PC sensing temperature and humidity data transmitted for wireless sensor nodes composed wireless temperature and humidity sensor and designs sensor nodes using embedded system with the intention of studying USN.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.1
• /
• pp.660-665
• /
• 2018

Research into underwater wireless networks that enable the monitoring and controlling of the ocean environments has been continuing for disaster prevention and military proposes, as well as for the exploitation of ocean resources throughout the world. A research group led by Hoseo university has been studying a distributed underwater monitoring and controlling network. In this study, we developed an interpolator for acoustic communication between an underwater base station controller and underwater base station, which is included in this network. The underwater acoustic communication provided by this network defines four links whose sampling rates are different. Low power consumption is one of the most important requirements. Therefore, we adopted CIC interpolators, which are known to act as filters with a low power consumption, and some CIC interpolators with an appropriate changing rate were selected depending on the link. However, these interpolators have a large passband drop and wide transition region. To solve these problems, we added a compensator and half-band filter. After verifying the algorithm by using Matlab, we designed and verified it with Verilog-HDL in a ModelSim environment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.5
• /
• pp.251-259
• /
• 2014

In this paper, we propose Low Energy Service Discovery (LESD) protocol for common discovery mode of IEEE 802.15.8 Peer Aware Communications (PAC). In order to minimize power consumption, Basic Repetition Block (BRB) is defined. Device is able to select operating mode and synchronize other devices through it. Proposed MAC procedure is Carrier Sense Multiple Access with Collision Avoidance (CSMA/CA) based on overhearing technique. Even if device has not been received response signal since transmitted request signal, it is able to discover other devices of same group through the overhearing technique. IEEE 802.15.8 PAC has required that performances of common discovery mode are presented about discovered devices during the simulation time, discovery latency and average power consumption. By considering the number of devices per group and channel environment, two scenarios are evaluated through system level simulation and the simulation results of proposed scheme are compared with CSMA/CA in same simulation conditions. As a result, proposed scheme is able to get high energy efficiency of devices as well as increase the number of discovered devices during simulation time when the longer the number of devices is distributed over a limited area.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.6C
• /
• pp.495-505
• /
• 2010

In this paper, the effect of Near-Far Problem (NFP) among distributed nodes in OFDMA-based Wireless Mesh Networks (WMNs) is analyzed by investigating statistical characteristics of Time Difference of Arrival (TDoA) and Desired-to-Undesired power Ratio (DUR). In order to overcome the effects of Inter-Symbol Interference (ISI), Inter-Carrier Interference (ICI), and Inter Link Interference (ILI), caused by TDoA in WMNs, we derive effective SINR for each subcarrier, and then, propose the optimal starting point of FFT window which can minimize BER for each subcarrier. In addition, we propose a subcarrier-based Zero Forcing - 2 Dimensional Ordered Successive Interference Cancellation (ZF-2DOSIC) technique for signal detection in WMNs with TDoA. It is verified by simulation that the effective SINR and uncoded BER performances of the proposed signal detection technique for OFDMA-based WMNs are significantly improved, compared with those of conventional technique.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.3
• /
• pp.1-7
• /
• 2018

The IoT environment provides an infinite variety of services using many different devices and networks. The development of the IoT environment is directly proportional to the level of security that can be provided. In some ways, lightweight cryptography is suitable for IoT environments, because it provides security, higher throughput, low power consumption and compactness. However, it has the limitation that it must form a new cryptosystem and be used within a limited resource range. Therefore, it is not the best solution for the IoT environment that requires diversification. Therefore, in order to overcome these disadvantages, this paper proposes a method suitable for the IoT environment, while using the existing block cipher algorithm, viz. the lightweight cipher algorithm, and keeping the existing system (viz. the sensing part and the server) almost unchanged. The proposed BCL architecture can perform encryption for various sensor devices in existing wire/wireless USNs (using) lightweight encryption. The proposed BCL architecture includes a pre/post-processing part in the existing block cipher algorithm, which allows various scattered devices to operate in a daisy chain network environment. This characteristic is optimal for the information security of distributed sensor systems and does not affect the neighboring network environment, even if hacking and cracking occur. Therefore, the BCL architecture proposed in the IoT environment can provide an optimal solution for the diversified IoT environment, because the existing block cryptographic algorithm, viz. the lightweight cryptographic algorithm, can be used.

• The Korean Journal of Emergency Medical Services
• /
• v.8 no.1
• /
• pp.117-126
• /
• 2004

In general, the patients who transferred to the hospital by 119 rescue service at night go to the emergency room(ER) of general hospital rather than that of their nearby the 1st(clinic) and 2nd(local hospital) hospital. And the hospital is mainly selected not by 119 EMST but by patients or his/her conservators. Therefore we had studied retrospectively with emergency situation diary and medical chart for 697 patients of being transferred to one emergency medical center for 6 months since January 2004, and results are as follows. 1. The 280 patients(42.5%) of being transferred hospital at night by 119 rescue service were not emergency case and their average staying time in hospital was about $7.15{\pm}10.06$ minutes. 2. Transfer time was distributed in each time intervals of 1819, 2021, 2223, and 2401 and patients ratio in each intervals were 15.1%, 17.8%, 16.4%, and 15.2%. 3. In response of ambulance, the average time from the spot to the hospital was $14.53{\pm}9.27min$. and average distance of that was $7.95{\pm}9.21km$. 4. Diseases rather than traffic accidents or traumatic injury were main causes of ambulance calling and its value was 533(76.5%), and accidents were mainly occurred in patients' house and its value was 479(68.7%). 5. In time of transfer by 119 rescue service, hospital was mainly selected by patient/conservator and its value was 648(93.0%). In result. the hospital was selected not by EMST but by patient/conservator. 6. The case that the 1st grade EMT was rode in ambulance was 161(23.1%), and the case that 2nd EMT and emergency team member who educated for emergency were rode in ambulance were 504(72.3%). So the number of the 1st grade EMT was short in fire station of Kwangju metropolitan city than other city. 7. The first aids for patients before reaching hospital were limited to oxygen inhalation, airway control, and BLS for maintaining limbs and spine. So it seems to be a simple patients transfer. Consequently, to establish an efficient emergency medical system, it has been thought that it should be advanced a moderate education and public information about the appropriate use of emergency medical system toward citizen, and also need the hospital selection by the patients categorizing standards for 119 rescue service member, securing the 1st grade EMT, appropriate first-aids education, and securing professional human power in emergency room of the Ist(clinic) and 2nd(local hospital) hospital at night.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.10
• /
• pp.2149-2156
• /
• 2011

In this paper, design of a new 3-dimensional (3-D) 16-ary signal constellation with constant envelope is presented and analyzed. Unlike the conventional 16-ary constellations, all signal points of the new constellation are uniformly located on the surface of a sphere so that they have a unique amplitude level and a symmetrical structure. When average power of the constellations is normalized, the presented 16-ary constellation has around 11.4% increased minimum Euclidean distance (MED) as compared to the conventional ones that have non-constant envelope. As a result, a digital communication system which exploits the presented constellation has 1.2dB improved symbol error rate (SER). While signal points of the conventional constant-envelope constellation are not distributed uniformly on the surface of a sphere, those of the proposed constellation has a completely symmetric distribution. In addition, the new signal constellation has much lower computational complexity for practical implementation than the conventional one. Hence, the proposed 3-D 16-ary signal constellation is appropriate for the application to a communication system which strongly requires a constant-envelope characteristic.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2003.05b
• /
• pp.455-459
• /
• 2003

In the great motive power which promotes the Game of future to develop. three main factors focus on 3D Graphics, Network and Virtual Reality. the Network technique as necessary elemental technique in Next-generation on-line game is being researched largely. However, from viewing the features of on-line game, if many users meet in same server, it not only causes heavy load to the server and brings inconvenience to the users, but also increases expense to the service provider and creates a problem which is to put up server or not. A proposal is going to do hybrid distributed system a client hardly depends on server for this paper, and to be able to enjoy a network game through information alternating current between clients. depended on the existing server, and the most message processing did a design in order to achieve between clients. A design way to propose is as follows. Primarily it was done in order proposed a message grade anger process way, and to be able to manage server or a client according to importance of message, and, with the second, did a Client-Server method and a Pear-to-Pear method at the same time, and a chase did efficiency. Third is going to propose other problem solving way by message grade anger in multi-anger and a security section of a message cue.

• Korean Journal of Food Science and Technology
• /
• v.52 no.6
• /
• pp.616-621
• /
• 2020

Sinapinic acid is a widely-distributed phenolic acid in various edible plants. In this study, changes in chemical stability and biological activities of sinapinic acid by heat treatment were evaluated at different pH values. The decomposition of sinapinic acid with heating at 95℃ was accelerated at higher pH; the residual levels after 10 min of heating were 80, 45 and 24% at pH 6, 7 and 8, respectively. Levels of reactive oxygen species derived from sinapinic acid also increased after heating at pH 7 and 8. ABTS radical scavenging activities and ferric reducing antioxidant power of sinapinic acid were reduced significantly after heating at pH 7 and 8. The cytotoxic activity of sinapinic acid against HCT116 cells was significantly enhanced after heating at pH 8 with decreased glutathione levels. The results suggest that heat treatment causes changes in the chemical stability and biological activities of sinapinic acid, and such changes are more prominent at higher pH.