• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.7
• /
• pp.76-91
• /
• 1996

In this paper, we proposed the new medium access control protocol for the virtual token bus netowrk. The network is applied to inter-processor communication network of large capacity digital switching system and digital mobile system with distributed control architecture. in the virtual token bus netowrk, the existing medium access control protocols hav ea switchove rtime overhead when traffic load is light or asymmetric according ot arbitration address of node that has message to send. The proposed protocol optimized average message delay using cyclic bus access chain to exclude switchover time of node that do not have message to send. Therefore it enhanced bus tuilization and average message delay that degrades the performance of real time communication netowrks. It showed that the proposed protocol is more enhacned than virtual token medium access control protocol and virtual token medium access control protocol iwth reservation through performance analysis.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.6
• /
• pp.760-772
• /
• 1999

The CAN is a serial communication protocol for distributed real-time control and automation systems. Data generated from field devices in the distributed control of power plant are classified into three categories: real-time event data, real-time control data, non-real-time data. These data share a CAN medium. If the traffic of the CAN protocol is not efficiently controlled, performance requirements of the power plant system could not be satisfied. This paper proposes a bandwidth allocation algorithm that can be applicable to the CAN protocol. The bandwidth allocation algorithm not only satisfies the performance requirements of the real-time systems in the power plant but also fully utilizes the bandwidth of CAN. The bandwidth allocation algorithm introduced in this paper is validated using the integrated discrete-event/continuous-time simulation model which comprises the CAN network and distributed control system of power plant.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2006.06a
• /
• pp.303-310
• /
• 2006

The sorting algorithms have been developed to take advantage of distributed computers. But the speedup of parallel sorting algorithms decrease rapidly with increased number of processors due to parallel processing overhead such as context switching time and inter-processor communication cost. In this paper, we propose a parallel sorting method which provides linear speedup of an optimal serial algorithm for a system with a large number of processors. This algorithm may even provide superlinear speedup for a practical system. The algorithm takes advantage of an interconnection network properties and its protocol.

• Bulletin of the Korean Institute for Industrial Safety
• /
• v.2 no.1
• /
• pp.6-10
• /
• 2002

Requirements for Distributed Monitoring and Control Networks(DMCN) differ greatly from those of typical data networks. Specifically, my DMCN technology which employs a filedbus protocol is different from IP network protocol TCP/IP. In general, one needs to integrate fieldbus protocol and TCP/IP to realize DMCN over IP network or internet, which can be viewed as Virtual Device Network(VDN). Interoperability between devices and equipments is essential to enhance the quality and the performance of predictive maintenance(PM). This paper suggests a basic framework for VDN using DMCN over IP network and a method to guarantee interoperability between devices and equipments.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.2
• /
• pp.197-203
• /
• 2004

A real-time network in a distributed control system plays an important role for the reliable data transmission. Compared to the field-buses used in the past, TCP/IP protocol on the top of Ethered provides a compatibility between applications as well as an economical method to develop softwares. This paper proposes a modified TCP/IP structure for IEEE-1394 network, with which asynchronous and isochronous data transmission is selectively used for the real-time data transmission in a distributed control system. This paper also shows the performance of the proposed protocol by experiments.

• 한국정보통신설비학회:학술대회논문집
• /
• 2003.08a
• /
• pp.349-352
• /
• 2003

In this paper, we introduce the concept, architecture, and service areas of FS-VDSL specification. We mainly focused on FS-VDSL CPE architecture, which consists of two different types, concentrated architecture and distributed one. We also provide the possibility of CPE adaptation in domestic in-home environment. As a result of our study, distributed CPE architecture is a better candidate to our in-home environment. Another important point of consideration in FS-VDSL adaptation in Korea is the protocol stack of FS-VDSL. Recently, Ethernet-based VDSL technology is more populated than ATM-based VDSL, which is originally adopted in FS-VDSL specification. So, we must deeply think about the modification of protocol stack of FS-VDSL when deploying it in Korea.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.88-92
• /
• 1999

This paper aims at developing remote contro system to control and monitor distributed various devices through internet or information communication network. SNMP (Simple Network Management Protocol) and rectifier operated in a row are adopted for network management protocol and applied device, respectively. For controlling and monitoring distributed devices in real-time java-environment software is constructed. Also general-use interface controller between network device and applied device is proposed. Finally, seria communication such as RS-232 and RS-485 is used between controller and applied device.

• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.3159-3161
• /
• 1999

This paper aims at developing remote control system to control and monitor distributed various devices through internet or information communication network. SNMP (Simple Network Management Protocol) and UPS (Uninterruptible Power Supply) are adopted for network management protocol and applied device, respectively. For controlling and monitoring distributed devices in real-time, Java-environment software is constructed. Also, general-use interface controller between network device and applied device is proposed. Finally, serial communication such as RS-232 and RS-485 is used between controller and applied device.

• Journal of Communications and Networks
• /
• v.7 no.4
• /
• pp.525-536
• /
• 2005

In an IP-based network, automated dynamic assignment of IP addresses is preferable. In most wired networks, a node relies on a centralized server by using dynamic host configuration protocol (DHCP) to obtain a dynamic IP address. However, the DHCP­based approach cannot be employed in a mobile ad hoc network (MANET) due to the uncertainty of any centralized DHCP server. That is, a MANET may become partitioned due to host mobility. Therefore, there is no guarantee to access a DHCP server. A general approach to address this issue is to allow a mobile host to pick a tentative address randomly, and then use duplicate address resolution (DAR) protocol to resolve any duplicate addresses. In this paper, an innovative distributed dynamic host configuration protocol designed to configure nodes in MANET is presented. The proposed protocol not only can detect the duplicate address, but also can resolve the problem caused by duplicate address. It shows that the proposed protocol works correctly and is more universal than earlier approaches. An enhanced version of DAR scheme is also proposed in this paper to solve the situation of duplicate MAC address. The new and innovative approach proposed in this paper can make the nodes in MANET provide services to other networks and avoid packets from being delivered to incorrect destinations.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.6
• /
• pp.1222-1227
• /
• 2009

In this paper, we proposed a new method, the CACH(Context-aware Clustering Hierarchy) algorithm in Mobile Ad-hoc Network(MANET) systems. The proposed CACH algorithm based on hybrid and clustering protocol that provide the reliable monitoring and control of a variety of environments for remote place. To improve the routing protocol in MANET, energy efficient routing protocol would be required as well as considering the mobility would be needed. The proposed analysis could help in defining the optimum depth of hierarchy architecture CACH utilize. Also, the proposed CACH could be used localized condition to enable adaptation and robustness for dynamic network topology protocol and this provide that our hierarchy to be resilient. As a result, our simulation results would show that a new method for CACH could find energy efficient depth of hierarchy of a cluster.