• 한국물환경학회지
• /
• 제39권3호
• /
• pp.215-222
• /
• 2023

Zooplankton are primary consumers in the food web connecting primary producers and predators such as small fish, playing an important role in energy transfer in aquatic ecosystems. Therefore, it is essential to understand the zooplankton community structure in material cycle and energy flow in aquatic ecosystems. Zooplankton in large rivers with a low flow rate would distribute vertically as in lakes. In this study, we collected zooplankton by surface water filtration and vertical haul method with 64 ㎛-mesh plankton net at three stations (ND-1, ND-2, ND-3) in Nakdong River fortnightly from June 2018 to December 2019. Species composition and individual densities were analyzed. All three stations showed differences in relative abundance of zooplankton groups between surface water and vertical integrated water, with the largest difference shown in the deepest station, ND-2. In vertically integrated water at ND-2, the relative abundance of rotifera was low by a maximum of 25% and that of cladocera was high by a maximum of 22% compared to surface water samples. These results indicate that surface water filtration method is not enough to represent the community structure of zooplankton compared to the vertical haul method in large rivers.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2002년도 추계종합학술대회
• /
• pp.368-372
• /
• 2002

디지털화된 멀티미디어 컨텐츠는 고속의 디지털 네트워크를 통해 제작자로부터 소비자에게 직접 전달되는 형태로 컨텐츠의 유통 경로가 변화하고 있다. 아울러 디지털 컨텐츠를 손쉽게 소비할 수 있도록 하는 다양한 디지털 장비의 보급은 과거의 멀티미디어 소비 구조를 놀라운 속도로 변화시켜 가고 있다. 특히 멀티미디어 PC와 디지털 텔레비전의 빠른 보급은 양질의 멀티미디어 컨텐츠의 손쉬운 구매와 소비를 촉진시키는 촉매와 같은 역할을 하고 있다. 하지만, 이런 시스템에서는 디지털 컨텐츠를 판매하고 소비할 뿐 그 컨텐츠에 대한 원 소유주가 주장할 수 있는 권리를 표현할 수 있는 방법이 없다. 때문에 소비자는 구매한 컨텐츠를 복사하여 타인에게 배포할 수 있으며, 뿐만 아니라 사용자가 자신이 필요한 분야에 맞게 다시 재 제작하여 배포할 수 있어 원래 컨텐츠에 대한 의미를 상실할 수 있다. 이에 된 논문에서는 디지털 컨텐츠에 대한 저작권 보호를 위해 XML(extensible Markup Language)에 기반하여 디지털 컨텐츠를 사용하는데 필요한 rights, fees, condition 등과 이에 덧붙여 메시지의 무결성과 엔티티인증에 대하여 기술한 XrML(eXtensible Rights Markup Language)를 위한 문서 편집 시스템을 설계 및 구현하였다.

• 한국전자파학회논문지
• /
• 제17권11호
• /
• pp.1089-1095
• /
• 2006

본 논문에서는 적층 PCB에 전송 영점을 갖는 3차원의 대역 통과 필터의 회로 해석을 하였다. 대역 통과 필터의 등가 회로는 고주파 네트웍 해석에 의해 계산되어졌다. 기존의 논문들은 분포 정수 소자의 영향을 제외한 회로 모델을 구성하였지만, 제안된 모델은 이에 대한 영향을 포함한다. 그 결과 인덕터들의 내부 전기적 성분으로부터 상호 커패시턴스를 추출함으로써 하나의 전송 영점을 갖는 적층 PCB 대역 통과 필터를 설계하였다. 구조의 크기는 단지 $10mm{\times}20mm{\times}1.2mm$이다. 대역 통과 필터의 측정된 데이터는 중심 주파수인 1.84 GHz에서 1.9 dB의 삽입 손실과, 28 dB의 반사 손실을 가지며, 차단 주파수인 2.78 GHz에서 43 dB의 감쇠 특성을 보인다.

• 문화기술의 융합
• /
• 제7권1호
• /
• pp.424-431
• /
• 2021

본 연구는 저출산·고령화, 만혼, 비혼, 별거, 사별, 귀농귀촌 등으로 인한 가족구조의 변화, 노동시장의 유연성 증대 등으로 인한 1인가구 증가라는 현상에 대해 1인가구의 화재예방 대책을 탐구하고 있다. 1인가구의 화재에 영향을 미치는 요인은 구조적 차원에서 주거환경문제가 있다. 행태적 측면에서 반려동물 양육에 따른 화재발생 증가가 있다. 1인가구의 화재예방을 위해서는 구조적 차원에서 주거환경 개선을 위한 예외 없는 안전규제가 필요하다. 행태적 차원에서는 관계기관 예방안전지도의 확대 적용이 필요하다. 또한 반려동물로 인한 화재 예방을 위한 조치로서 전기레인지의 제조사들은 반려동물로 인한 화재를 예방하는 안전장치, 예를 들면 자동 전원 차단장치나 타이머를 활용한 전원 공급 등을 개발해야 한다. 반려동물을 안전하게 키우기 위해 필요한 조치들을 홍보영상으로 만들어 배포하거나 가상현실로 구현된 재난대비 프로그램을 개발해서 보급하는 것도 중요한 수단이 될 수 있다.

• 한국해양공학회지
• /
• 제26권1호
• /
• pp.78-83
• /
• 2012

The abundant nutrients contained in deep seawater are delivered by natural upwellings from the deep sea to the surface sea. However, the natural upwelling phenomenon is limited to specific areas of the sea; in other areas, the thermocline separates the surface sea from the lower layer. Thus, the surface layer is often deficient in nutritive salts, causing the deterioration of its primary productivity and ultimately leading to an imbalance in the marine ecosystem. Without a consistent supply of nitrogenous nutritive salts, they are absorbed by phytoplankton, resulting in a considerable problem in primary productivity. To solve this issue, a floating type of artificial upwelling system is suggested to artificially pump up, distribute, and diffuse deep seawater containing rich nutritive salts. The key technologies for developing such a floating artificial upwelling system are a floating offshore structure with a large diameter riser, self-supplying energy system, density current generating system, method for estimating the emission and absorption of CO2, and way to evaluate the primary production variation. Strengthening the primary production of the sea by supplying deep seawater to the sea surface will result in a sea environment with abundant fishery resources.

• 대한조선학회논문집
• /
• 제51권5호
• /
• pp.409-418
• /
• 2014

Simulation of flow past a complex marine structure requires a fine resolution in the vicinity of the structure, whereas a coarse resolution is enough far away from it. Therefore, a lot of grid cells may be wasted, when a simple Cartesian grid system is used for an Immersed Boundary Method (IBM). To alleviate this problems while maintaining the Cartesian frame work, we adopted an Adaptive Mesh Refinement (AMR) scheme where the grid system dynamically and locally refines as needed. In this study, We implemented a moving IBM and an AMR technique in our basic 3D incompressible Navier-Stokes solver. A Volume Of Fluid (VOF) method was used to effectively treat the free surface, and a recently developed Lagrangian Dynamic Subgrid-scale Model (LDSM) was incorporated in the code for accurate turbulence modeling. To capture vortex induced vibration accurately, the equation for the structure movement and the governing equations for fluid flow were solved at the same time implicitly. Also, We have developed an interface by using AutoLISP, which can properly distribute marker particles for IBM, compute the geometrical information of the object, and transfer it to the solver for the main simulation. To verify our numerical methodology, our results were compared with other authors' numerical and experimental results for the benchmark problems, revealing excellent agreement. Using the verified code, we investigated the following cases. (1) simulating flow around a floating sphere. (2) simulating flow past a marine structure.

• Transactions on Electrical and Electronic Materials
• /
• 제18권4호
• /
• pp.199-202
• /
• 2017

Silicon carbide (SiC) is being spotlighted as a next-generation power semiconductor material owing to the characteristic limitations of the existing silicon materials. SiC has a wider band gap, higher breakdown voltage, higher thermal conductivity, and higher saturation electron mobility than those of Si. When using this material to implement Schottky barrier diode (SBD) devices, SBD-state operation loss and switching loss can be greatly reduced as compared to that of traditional Si. However, actual SiC SBDs exhibit a lower dielectric breakdown voltage than the theoretical breakdown voltage that causes the electric field concentration, a phenomenon that occurs on the edge of the contact surface as in conventional power semiconductor devices. Therefore in order to obtain a high breakdown voltage, it is necessary to distribute the electric field concentration using the edge termination structure. In this paper, we designed an edge termination structure using a field plate structure through oxide etch angle control, and optimized the structure to obtain a high breakdown voltage. We designed the edge termination structure for a 650 V breakdown voltage using Sentaurus Workbench provided by IDEC. We conducted field plate experiments. under the following conditions: $15^{\circ}$, $30^{\circ}$, $45^{\circ}$, $60^{\circ}$, and $75^{\circ}$. The experimental results indicated that the oxide etch angle was $45^{\circ}$ when the breakdown voltage characteristics of the SiC SBD were optimized and a breakdown voltage of 681 V was obtained.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제15권1호
• /
• pp.114-121
• /
• 2015

In conventional LEDs, a mesa-structure is usually used and it causes the current to be overcrowded in a specific region. We propose a novel structure of GaN-based LED to overcome this problem. In order to distribute the current in an active region, a spreading pad is inserted at the p-type region in the GaN based LED device. The inserted spreading pad helps the current flow because it is more conductive than the p-type GaN layer. By performing electrical and optical simulations, the effects of the spreading pad insertion are confirmed. The results of electrical simulation show that the current spreads more uniformly and more radiative recombination is produced as well. Moreover, from the optical simulation, it is revealed that the ITO is less absorptive material than p-GaN if the condition of specific wavelength sources is satisfied. Considering all of the results, we can conclude that the luminescent power is enhanced by the spreading pad.

• 한국콘텐츠학회논문지
• /
• 제7권8호
• /
• pp.163-173
• /
• 2007

Need 나 want 시대를 지난 지금의 시대적 상황을 Feeling 시대라고 용어를 정리 하면서, 소비자 심리와 행동, 사회 문화적 변용을 근거로 한 의미 작용을 분석하였다. 이를 근거로 하여 $\sqrt{3}$비례를 기준으로 한 정삼각형의 기본조형을 얻어 유통, 판매, 할 수 있는 상품의 실질적 조형에 접근하였고, 상품 사용 후 여러 가지 형태로 다변화 할 수 있는 유희성과 재활용적 조형을 구축하였다. 이는 탈 코드화된 패키지조형의 창조라는 점에 큰 의미를 갖는다. 또 패키지 조형의 물리적, 기능적 가치뿐만 아니라 심리적 사회문화적 해석의 기능과 소비자의 정체성이 교감될 수 있도록 적절한 조형적 기호(semiotics)가 연구되어졌다.

• Journal of Mechanical Science and Technology
• /
• 제17권12호
• /
• pp.2053-2065
• /
• 2003

The current trend in automotive finishing industry is to use more electrostatic rotating bell (ESRB) need space to their higher transfer efficiency. The flow physics related with the transfer efficiency is strongly influenced by operating parameters. In order to improve their high transfer efficiency without compromising the coating quality, a better understanding is necessary to the ESRB application of metallic basecoat painting for the automobile exterior. This paper presents the results from experimental investigation of the ESRB spray to apply water-borne painting. The visualization, the droplet size, and velocity measurements of the spray flow were conducted under the operating conditions such as liquid flow rate, shaping airflow rate, bell rotational speed, and electrostatic voltage setting. The optical techniques used in here were a microscopic and light sheet visualization by a copper vapor laser, and a phase Doppler particle analyzer (PDPA) system. Water was used as paint surrogate for simplicity. The results show that the bell rotating speed is the most important influencing parameter for atomization processes. Liquid flow rate and shaping airflow rate significantly influence the spray structure. Based on the microscopic visualization, the atomization process occurs in ligament breakup mode, which is one of three atomization modes in rotating atomizer. In the spray transport zone, droplets tend to distribute according to size with the larger drops on the outer periphery of spray. In addition, the results of present study provide detailed information on the paint spray structure and transfer processes.