• 제목/요약/키워드: Distributary

검색결과 13건 처리시간 0.03초

우리나라의 구하도 유형과 분포 특성 (Study on Types and Distributional Properties of Abandoned Channels in Korea)

  • 이광률
    • 대한지리학회지
    • /
    • 제46권3호
    • /
    • pp.304-318
    • /
    • 2011
  • 본 연구는 우리나라에 분포하는 구하도의 유형을 구분하고 유형별 분포와 형상 특성을 분석하였다. 현재 우리나라에는 감입곡류 목 절단, 하천쟁탈, 분류, 감입곡류 하천의 인위적인 절단, 자유곡류 하도의 직강화, 분류 하도의 직강화에 의한 6가지 유형의 구하도가 총 409개 분포하고 있다. 이 가운데 266개로 가장 많은 감입곡류 목 절단 구하도는 고도가 높고 기복이 심하며 감입곡류 하천이 많은 강원과 경북에 많으며, 낙동강 본류의 상류, 남한강의 지류인 달천과 평창강 등에서 분포 빈도가 높다. 분류에 의한 구하도는 남한강 하류와 낙동강 하류의 본류, 자유곡류 하도의 직강화에 의한 구하도는 만경강과 영산강, 분류 하도의 직강화에 의한 구하도는 금호강에서 분포 빈도가 가장 높다. 감입곡류 목 절단과 하천쟁탈에 의한 구하도는 나머지 유형에 비해 해발고도와 하상비고가 매우 높아서, 농경지나 산림으로의 토지이용 비율이 상대적으로 높다.

대구 신천(新川) 유로에 관한 새로운 해석 (A New Interpretation about the River Channel of Shincheon in Daegu)

  • 전영권
    • 한국지역지리학회지
    • /
    • 제10권4호
    • /
    • pp.689-697
    • /
    • 2004
  • 본 연구에서는 고문헌과 고지도 등을 통해 신천 원유로의 위치를 고증하였으며, 그 결과는 다음과 같다. 첫째, 1778년 이전의 신천이 현재의 신천 유로와는 달리 대구 중심부를 흘렀다는 주장은 사실과 다르다. 둘째, 현재의 신천이라는 지명은 1778년 대구 판관 이서가 새롭게 조성한 물줄기라는 의미에서 그 명칭이 생겨나게 되었다는 주장도 사실과 다르다. 셋째, 신천의 한 분류로 인식되어온 대구천은 그것의 발원지가 신천과는 다른 앞산의 계곡(삼정골 또는 강당골 일대)과 그 일대의 작은 구릉지로 판단된다. 넷째, 일제강점기 때 대구천은 소멸되었으며, 다만 대구천 일부가 이천천으로 유로가 변경되어 신천으로 유입하고 있다. 다섯째, 신천의 유로는 역사시대 이래 지금까지 변화가 없었다.

  • PDF

녹산국가공단 조성지 일대의 토목 지질 (Geology of Nogsan National Industrial Engineering Estate)

  • 안명석;김종대
    • 화약ㆍ발파
    • /
    • 제18권3호
    • /
    • pp.99-106
    • /
    • 2000
  • The geology of Nogsan industrial estate area, Pusan, Korea consists mainly of andesitic rocks, rhyolitic rocks and hornblende granite. They are then intruded by basic and acidic dikes. All of the igneous activities in this area are in Cretaceous time, that is the lower part of Silla group in Gyoungsang basin. Andesitic volcanic rocks are distributed in two separate basines: Saengok basin and Doodong basin. Although both basines contain andesite and andesitic breccia(Kab), younger andesitic activity was more active to the western Doodong basin giving very little influence on the eastern Saengok basin. Sediments in the area are quarternaly alluvium and colluvium. Alluvium is very thick and consists mainly of silt and clay deposited as delta deposits at the mouth of Nakdong river. Colluvium in the area is short distributary channel deposits. The area is largely filled with socks and sediments to build industrial estates especially on the delta deposits at Shinhodong area and on the shoreline mud bed between Yongwondong and Shinhodong. A careful investigation to avoid the possibility of a large scale mud flow is suggested because it could be trigered by many reason such as an earthquake or a flood on the land where a heavily loaded salt-water may soaked into the muddy bed lying on the granitic basement gently dipping toward the ocean. Althouth the area is in the Yangsan fault zone no ground evidence of fault can be seen despite the RESTEC sattlite image gives excelent traces of linearments in the area.

  • PDF

Depositional processes and environmental changes during initial flooding of an epeiric platform: Liguan Formation (Cambrian Series 2), Shandong Province, China

  • Lee, Hyun Suk;Chen, Jitao;Han, Zuozhen;Chough, Sung Kwun
    • Geosciences Journal
    • /
    • 제22권6호
    • /
    • pp.903-919
    • /
    • 2018
  • This paper focuses on the depositional processes and environmental changes during initial marine flooding recorded in the lower Cambrian succession of the North China Platform in Shandong Province, China. In order to understand imbalance of accommodation and sediment supply in the initial stage of basin-fill, a detailed analysis of sedimentary facies was made for the lowermost siliciclastic deposits of the Liguan Formation. It reveals ten siliciclastic lithofacies in three large-scale outcrops (Jinhe, Anqianzhuang, and Zhangjiapo sections). These facies are grouped into four facies associations, representing siliciclastic foreshoreshoreface (S1), siliciclastic offshore (S2), distributary mouth bars (S3), and coastal plain (S4). The siliciclastic components occur in a linear belt, emanating from a major drainage system in the northeastern part of the platform. Deposition of siliciclastic sediments was largely controlled by regional topography of the unconformable surface and shoreline configuration as well as strong effect of waves and currents. With ensued rise in sea level and decrease in siliciclastic sediment supply, carbonate sediments prevailed, filling the accommodation created by epeirogenic subsidence and sediment loading.

범람원에 형성된 호소성 습지에 관한 연구 - 낙동강 중류를 사례로 - (Lake-like Swamps Formed in Floodplain on Middle Reach of Nakdong-gang River)

  • 천미연
    • 한국지역지리학회지
    • /
    • 제14권1호
    • /
    • pp.27-39
    • /
    • 2008
  • 본 연구는 낙동강과 그 지류인 금호강에 형성된 호소성 습지의 형성과정을 밝히고자 하였다. 이를 위하여 세 시기의 지형도를 비교 분석하고 단면도를 작성하였으며, 퇴적물의 입경분포를 분석하였다. 그 결과 호소성 습지의 형성 과정을 3가지로 유형화하였다. 첫째, 샛강습지와 금강늪은 망류하천을 이루고 있는 구간에서 분류하여 흐르는 유로의 자유로운 이동 과정에서 남아 형성된 잔적호 습지이다. 둘째, 씩실늪과 낫늪은 배후산지에서 흘러나온 지류가 자연제방의 방해로 유로가 차단되어 자연제방과 평행하게 흘러 본류로 유입되는 yazoo형 습지이다. 셋째, 세천늪과 호촌늪, 진촌늪은 본류 하천의 범람으로 자연제방과 배후습지가 형성된 이후에 다음 홍수시 범람하는 본류 하천이 습지로 유입되어 형성된 범람 유입수형 습지이다.

  • PDF

예연측면웨어의 종방향 흐름특성 해석 (Analysis of the Longitudinal Flow Characteristics of a Sharp-Crested Side Weir)

  • 박종표;김대근;박창근;김남일
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2005년도 학술발표회 논문집
    • /
    • pp.970-975
    • /
    • 2005
  • 측면웨어(side weir)는 본류의 수위가 한계수위 이상으로 상승할 경우 본류로부터 저류지나 분수로(distributary channel)로 흐름을 전환하기 위하여 사용하는 수공구조물이다. 최근 들어 치수와 관련된 계획에서 본류의 홍수량 중 일부를 저류지나 홍수 우회수로로 전환시키는 시설에 대한 관심이 높아지고 있다. 측면웨어가 하천에 설치되는 경우, 측면웨어 부근 표층부의 흐름은 측면웨어의 영향을 크게 받으며, 수의바닥이나 측면웨어에서 떨어진 지점의 흐름은 측면웨어의 영향을 작게 받는 등 측면웨어 주변부는 3차원적인 흐름특성을 보인다. 또한 측면웨어를 월류하는 흐름이 일반 웨어와 같이 웨어 마루부에 대하여 직각방향으로 흐르지 않고 본류의 유속에 따라 비스듬하게 흐르게 된다. 이러한 흐름특성으로 인해 측면웨어를 통과하는 유량은 본류의 하폭, 본류의 흐름특성, 측면웨어의 길이 및 설치위치 등에 따라 각기 다르게 산정되는 것으로 알려져 있다. 본 연구에서는 기존 측면웨에에 관한 연구를 정리하고 상용 프로그램인 FLOW-3D를 이용하여 측면웨어가 설치된 경우의 흐름을 해석하였다. 해석결과는 기존 실험연구에 바탕을 둔 이론식과 비교하였다. 계산격자는 구조물 부근의 흐름이 급변하는 곳은 격자크기를 작게, 흐름의 변화가 완만한 곳은 격자크기를 크게 하였다. 경계조건으로 상류는 유량, 하류는 수위경계를 입력하였다. 본 수치모의결과와 이론식을 이용하여 산정한 월류량을 비교한 결과 약 $10-30\% 내외의 오차가 발생하는 것으로 나타났다. 본류의 흐름은 웨어의 길이가 짧을수록 상$\cdot$하류단의 수위차가 작아지며 유속의 경우 웨어길이가 길고, 높이가 낮을수록 빨라진다. 측면웨어 주변부 흐름의 경우, 웨어의 길이가 짧을수록 방류강도가 강하고 횡방향의 수면변위가 급하게 형성되고 있음을 알 수 있다 또한, 웨어의 길이가 상대적으로 길어질 경우에는 3차원적 흐름특성에 의하여 유속의 분포가 다양하여 이론식과 결과의 오차가 점점 더 커짐을 알 수 있다. 본 연구는 사각형수로에 측면웨어가 설치된 경우, 월류량과 수리학적 거동을 해석할 때 수치모형실험이 수리모형실험과 더불어 유용한 해석도구로 이용될 수 있음을 보인 깃으로 이후 관련 구조물의 설계와 해석 시 참고자료로 이용 가능할 것으로 판단된다.

  • PDF

사행수로 구간의 횡월류위어 유입구 위치특성에 따른 흐름해석 (Analysis of Turbulent Flow by Location Characteristics of Side Weir inlet in Meandering Channels)

  • 유창환;신재성;오윤근
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2020년도 학술발표회
    • /
    • pp.306-306
    • /
    • 2020
  • 횡월류위어(side weir)는 하천의 수위가 한계수위 이상으로 상승할 경우 본류로부터 저류지나 분수로(distributary channel)로 흐름을 전환하기 위하여 사용하는 수공구조물로 강변저류지나 off-line저류지의 유입부에 흐름방향과 평행하게 설치되어 유량관리 및 전환, 홍수통제, 에너지 소산, 수위조절, 일정 유량의 취수 및 분배, 초과 홍수량의 전환 등의 목적으로 이용되는 구조물이다. 횡월류 위어의 월류 흐름은 일반위어와 같이 위어마루부 직각방향으로 흐르지 않고 본류 흐름특성에 따라 비스듬하게 유입된다. 이러한 흐름특성으로 횡월류위어 월류량은 본류의 하폭, 흐름특성, 위어길이 및 설치위치 등에 따라 각기 다르게 산정된다. 현재 국내에서 진행된 횡월류위어 흐름특성에 관련된 연구는 대부분 직선수로에 집중되어 있으며 사행하천의 흐름특성에 따른 연구는 부족한 실정이다. 금회 연구에서는 3차원 상용프로그램인 FLOW-3D를 이용하여 사행하천구간 유입부 설치위치 특성에 따른 횡월류 위어 유입흐름 특성을 분석하였다. 사행하천 구간 횡월류위어 설치위치에 따른 3차원 흐름해석을 위해 AUTO CAD 프로그램을 이용하여 수로길이 30m, 수로폭 2m의 구형 사행수로를 구성하였고, 횡월류위어 유입부 위치를 20°~120°로 변화시키며 수치모형실험을 수행하였다. 해석결과 수로흐름은 유입부 설치각이 작을수록 상·하류 수위차가 작아지며 유속이 감소하며 설치위치각이 클수록 수로내 평균유속은 증가하는 것으로 확인되었다. 유입부 설치각이 작을수록 방류량이 증가하여 수로내 흐름분리현상 증가하였고 이로인한 지체현상이 발생하는 것으로 확인되었다. 본 연구로 사행하천구간에 횡월류위어가 설치된 경우, 월류량과 수리학적 흐름특성을 해석할 때 3차원 수치모형실험이 유용한 해석도구로 이용될 수 있음이 확인되었다. 이후 수치모형실험이 수공구조물 설계 및 해석 시 참고자료로 이용 가능할 것으로 사료된다.

  • PDF

사행수로 구간의 횡월류위어 유입구 위치특성에 따른 흐름해석 (Analysis of Turbulent Flow by Location Characteristics of Side Weir inlet in Meandering Channels)

  • 유창환
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2021년도 학술발표회
    • /
    • pp.250-250
    • /
    • 2021
  • 횡월류위어(side weir)는 하천의 수위가 한계수위 이상으로 상승할 경우 본류로부터 저류지나 분수로(distributary channel)로 흐름을 전환하기 위하여 사용하는 수공구조물로 강변저류지나 off-line저류지의 유입부에 흐름방향과 평행하게 설치되어 유량관리 및 전환, 홍수통제, 에너지 소산, 수위조절, 일정 유량의 취수 및 분배, 초과 홍수량의 전환 등의 목적으로 이용되는 구조물이다. 횡월류 위어의 월류 흐름은 일반위어와 같이 위어마루부 직각방향으로 흐르지 않고 본류 흐름특성에 따라 비스듬하게 유입된다. 이러한 흐름특성으로 횡월류위어 월류량은 본류의 하폭, 흐름특성, 위어길이 및 설치위치 등에 따라 각기 다르게 산정된다. 현재 국내에서 진행된 횡월류위어 흐름특성에 관련된 연구는 대부분 직선수로에 집중되어 있으며 사행하천의 흐름특성에 따른 연구는 부족한 실정이다. 금회 연구에서는 3차원 상용프로그램인 FLOW-3D를 이용하여 사행하천구간 유입부 설치위치 특성에 따른 횡월류 위어 유입흐름 특성을 분석하였다. 사행하천 구간 횡월류위어 설치위치에 따른 3차원 흐름해석을 위해 AUTO CAD 프로그램을 이용하여 수로길이 30m, 수로폭 2m의 구형 사행수로를 구성하였고, 횡월류위어 유입부 위치를 20°~120°로 변화시키며 수치모형실험을 수행하였다. 해석결과 수로흐름은 유입부 설치각이 작을수록 상·하류 수위차가 작아지며 유속이 감소하며 설치위치각이 클수록 수로내 평균유속은 증가하는 것으로 확인되었다. 유입부 설치각이 작을수록 방류량이 증가하여 수로내 흐름분리현상 증가하였고 이로인한 지체현상이 발생하는 것으로 확인되었다. 본 연구로 사행하천구간에 횡월류위어가 설치된 경우, 월류량과 수리학적 흐름특성을 해석할 때 3차원 수치모형실험이 유용한 해석도구로 이용될 수 있음이 확인되었다. 이후 수치모형실험이 수공구조물 설계 및 해석 시 참고자료로 이용가능할 것으로 사료된다.

  • PDF

How effective has the Wairau River erodible embankment been in removing sediment from the Lower Wairau River?

  • Kyle, Christensen
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2015년도 학술발표회
    • /
    • pp.237-237
    • /
    • 2015
  • The district of Marlborough has had more than its share of river management projects over the past 150 years, each one uniquely affecting the geomorphology and flood hazard of the Wairau Plains. A major early project was to block the Opawa distributary channel at Conders Bend. The Opawa distributary channel took a third and more of Wairau River floodwaters and was a major increasing threat to Blenheim. The blocking of the Opawa required the Wairau and Lower Wairau rivers to carry greater flood flows more often. Consequently the Lower Wairau River was breaking out of its stopbanks approximately every seven years. The idea of diverting flood waters at Tuamarina by providing a direct diversion to the sea through the beach ridges was conceptualised back around the 1920s however, limits on resources and machinery meant the mission of excavating this diversion didn't become feasible until the 1960s. In 1964 a 10 m wide pilot channel was cut from the sea to Tuamarina with an initial capacity of $700m^3/s$. It was expected that floods would eventually scour this 'Wairau Diversion' to its design channel width of 150 m. This did take many more years than initially thought but after approximately 50 years with a little mechanical assistance the Wairau Diversion reached an adequate capacity. Using the power of the river to erode the channel out to its design width and depth was a brilliant idea that saved many thousands of dollars in construction costs and it is somewhat ironic that it is that very same concept that is now being used to deal with the aggradation problem that the Wairau Diversion has caused. The introduction of the Wairau Diversion did provide some flood relief to the lower reaches of the river but unfortunately as the Diversion channel was eroding and enlarging the Lower Wairau River was aggrading and reducing in capacity due to its inability to pass its sediment load with reduced flood flows. It is estimated that approximately $2,000,000m^3$ of sediment was deposited on the bed of the Lower Wairau River in the time between the Diversion's introduction in 1964 and 2010, raising the Lower Wairau's bed upwards of 1.5m in some locations. A numerical morphological model (MIKE-11 ST) was used to assess a number of options which led to the decision and resource consent to construct an erodible (fuse plug) bank at the head of the Wairau Diversion to divert more frequent scouring-flows ($+400m^3/s$)down the Lower Wairau River. Full control gates were ruled out on the grounds of expense. The initial construction of the erodible bank followed in late 2009 with the bank's level at the fuse location set to overtop and begin washing out at a combined Wairau flow of $1,400m^3/s$ which avoids berm flooding in the Lower Wairau. In the three years since the erodible bank was first constructed the Wairau River has sustained 14 events with recorded flows at Tuamarina above $1,000m^3/s$ and three of events in excess of $2,500m^3/s$. These freshes and floods have resulted in washout and rebuild of the erodible bank eight times with a combined rebuild expenditure of $80,000. Marlborough District Council's Rivers & Drainage Department maintains a regular monitoring program for the bed of the Lower Wairau River, which consists of recurrently surveying a series of standard cross sections and estimating the mean bed level (MBL) at each section as well as an overall MBL change over time. A survey was carried out just prior to the installation of the erodible bank and another survey was carried out earlier this year. The results from this latest survey show for the first time since construction of the Wairau Diversion the Lower Wairau River is enlarging. It is estimated that the entire bed of the Lower Wairau has eroded down by an overall average of 60 mm since the introduction of the erodible bank which equates to a total volume of $260,000m^3$. At a cost of $$0.30/m^3$ this represents excellent value compared to mechanical dredging which would likely be in excess of $$10/m^3$. This confirms that the idea of using the river to enlarge the channel is again working for the Wairau River system and that in time nature's "excavator" will provide a channel capacity that will continue to meet design requirements.

  • PDF

경기만 석모수도 수로제방 조간대층에 발달하는 경사이질암상층리의 퇴적학적 연구 - 오일샌드 탐사 적용가능성 (Sedimentology of Inclined Heterolithic Stratification in Sukmo Channel, Kyonggi Bay, Korea - Application to Oil Sand Exploration)

  • 최경식;;전승수;김성필;박세진
    • 한국석유지질학회지
    • /
    • 제11권1호
    • /
    • pp.18-26
    • /
    • 2005
  • 경기만 북부 석모수도 수로제방에 40 m 두께의 조수로 포인트바(tidal point bar) 퇴적층이 발달하고 있다. 수로 제방은 위로 볼록한 형태를 가지고 있으며 간헐적으로 간조선 근방에서 파랑기원의 침식면이 나타난다. 경사이질암상층리는 최대 25 m 두께로 발달하며 수로 방향으로 경사도는 14도에 달한다. 경사이질암상층리의 하부에는 밀물방향성을 갖는 사층리층이 발달한다. 석모수도는 썰물우세 수로이지만 밀물 방향성의 사층리가 우세하게 발달하는데 이것은 조수로의 전형적인 특성인 창조류와 낙조류리 상호 회피성에 기인한다. 경사이질암상층리는 세립사와 점토의 교호층리로 구성되며 상향 세립화의 경향성을 보인다. 석모수도의 거대한 크기와 한강으로부터의 멀리 떨어진 위치, 강한 조류의 영향으로 인해 퇴적층 내에는 한강의 계절적인 유량변동이 기록되지 않는다.

  • PDF