• 대한족부족관절학회지
• /
• 제1권2호
• /
• pp.81-88
• /
• 1997

The arthroscopic ankle arthrodesis is one of the good method of the ankle arthrodesis. Mechanical distraction of tibiotalar joint is an absolute necessity for adequate visualization and operative instrumentation. However, there are several disadvantages. Thus we performed arthroscopic ankle arthrodesis using calcaneal traction in three cases and achieved following results. 1. The procedure is easy and the operation time is shorter than the other arthroscopic ankle arthrodesis. 2. The risk of neurovascular damage and infection is reduced by using calcaneal traction. 3. It does not require the expensive distraction device. 4. The adequate visualization for operative instrumentation is obtained.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제37권5호
• /
• pp.421-428
• /
• 2011

Introduction: The purpose of this study was to evaluate the clinical result of vertical alveolar distraction, especially the distracted alveolar bone and installed implants. Materials and Methods: Twenty-one patients who have been received the vertical alveolar distraction and implant installation on 22 areas (3 maxilla and 19 mandible) using intraoral alveolar distraction device were examined. After consolidation period of 3-4 months, distraction devices were removed and 91 implants were installed in the distracted alveolar bone. The distracted bone and implants were evaluated clinically and radiographically. Results: Mean height of distracted alveolar bone was $7.5{\pm}3.2$ mm (range: 2.5-15.0 mm). Mean follow-up period after completion of the distraction was 3.1 years (range: 1.4-11.5 years). Mean resorption of distracted alveolar bone was $1.6{\pm}1.8$ mm. The success and survival rates of implants was 95.3% and 100%, respectively. Conclusion: Results of this study indicate that vertical alveolar distraction procedure is a useful and stable method for alveolar ridge augmentation and implantation.

• 한국정밀공학회지
• /
• 제21권8호
• /
• pp.157-163
• /
• 2004

Scoliosis is a complex musculoskeletal dieses requiring 3-D treatment with surgical instrumentation. To investigate the effects of correction surgery, a finite element model of personalized model of the scoliotic spine that will allow the design of clinical test providing optimal estimation of the post-operation results was developed. Three dimensional skeletal parts, such as vertebrae, clavicle and scapular were modeled as rigid bodies with keeping their morphologies. Kinematical joints and spring elements were adapted to represent the inter-vertebral disc and ligaments respectively. With this model, two types of surgery procedure, distraction procedure with Harrington device and rod derotation procedure with pedicle screw and rod system had been carried out. The obtained simulation results were comparatively corresponding to the post operational outcomes and successfully demonstrated qualitative analysis of surgical effectiveness. From this analysis, it has been found that the preparing of appropriate rod curvature and its insertion was more important than just performing the excessive derotation for scoliosis correction.

• 대한관절경학회지
• /
• 제13권3호
• /
• pp.235-241
• /
• 2009

The development of good quality small-diametered arthroscopes and refined arthroscopic techniques has contributed to the improvement of the subtalar arthroscopy. The therapeutic indications are synovectomy, removal of loose bodies, debridement and drilling of osteochondritis dissecans, excision of subtalar impingement lesions and osteophytes, lysis of adhesions for post-traumatic arthrofibrosis, removal of a symptomatic os trigonum, calcaneal fracture assessment and reduction, and arthroscopic arthrodesis of the subtalar joint. The subtalar arthroscopy can be done in supine position using thigh holder or in lateral decubitus position. The arthroscope generally used is a 2.7-mm 30 degrees short arthroscope. Noninvasive distraction with a strap around the hindfoot can be helpful. Usually anterolateral, middle and posterolateral portals are utilized for inspection and instrumentation within the joint. Twoportal posterior subtalar arthroscopy in prone position can be performed as well with 4.0-mm 30 degrees arthroscope, depending on the type and location of the subtalar pathology. The subtalar arthroscopy is a technically demanding procedure, which requires proper instrumentation and careful operative technique. Possible complications are nerve damage and persistent wound drainage.

• 대한의용생체공학회:의공학회지
• /
• 제25권1호
• /
• pp.71-76
• /
• 2004

척추 측만증 교정 시 유합 범위에 따른 수술 후 의 효과를 분석하기 위하여 King-Moe type II 형태의 척추 측만증 환자를 대상으로 이에 대한 수학적 유한 요소 모델을 개발하였다. 유한 요소 모델을 이용하여 척추경 나사못을 이용한 고정 및 강봉 감염술 형태의 수술모사를 수행하였으며, 유합 범위를 각기 달리하여 수술 시뮬레이션 후의 척추계의 변화 즉 Cobb 각도, 첨추체 축회전, 흉추 후만각 그리고 늑골고의 변화를 정량적으로 계산하였다. 해석 결과 강봉 감염술의 경우에서 보다 강봉을 척추경 나사못에 연결시키는 과정에서 훨씬 더 많은 Cobb각도의 변화를 얻을 수 있었다. 강봉 감염술 과정에서는 약간의 Cobb각도 감소를 유발시킬 수 있었으나 오히려 척추체 축회전과 늑골 돌출고의 증가를 나타내었다 아울러 강봉과 척추경 나사못의 체결 과정이 척추 후만각 유지에도 큰 역할을 하고 있음을 알 수 있었다. 유합 범위를 변곡 발생 추체의 위치 보다 한 단계씩 길게(T4-12) 하여 60o의 강봉 감염술을 시행하였을 경우 Cobb 각도를 두 배 감소시킬 수 있었으나 급격한 늑골고와 첨추체 축회전량의 증가가 유발되었다. 해석 결과 유합 범위는 만곡 흠추체에서 변곡이 발생되는 위치 보다 한 레벨씩 작게 선정하는 것이 최적의 유합 범위임을 알 수 있었다.