• 한국강구조학회 논문집
• /
• 제14권6호
• /
• pp.747-754
• /
• 2002

기존 바닥조이스트의 문제점을 해결하기 위해 냉간성형강 평트러스 시스템에 대한 연구를 진행하였다. 냉간성형강 평트러스 시스템은 기존 스틸 조이스트 시스템과 유사한 구조형식을 취하고 있으며, 무게 대비 성능이 우수하고, 설비라인을 바닥 구조재와 동일 선상에 배치할 수 있다는 장점을 가지고 있다. 본 연구에서는 Square End Type(SE Type), Underslung Type(EE Type) 평트러스의 구조적 거동에 대한 분석과 더불어, AISI 설계기준을 토대로 평트러스의 설계하중에 대한 평가가 진행되었다. 그리고 휨 실험을 통해 평트러스의 좌굴 거동에 대한 조사를 진행하였다. 실험결과 SE Type 평트러스가 EE Type 평트러스 보다 집중하중에 유리한 것으로 확인되었으며, 약축방향에 대한 비보강길이가 평트러스의 성능에 중요한 영향을 미치는 것으로 분석되었다. 그리고 실험을 통해 측정된 평트러스의 좌굴하중은 AISI 설계기준 값을 충족시키는 것으로 확인되었다.

• Steel and Composite Structures
• /
• 제33권1호
• /
• pp.37-66
• /
• 2019

In cold-formed steel structures, such as trusses, wall frames and portal frames, the use of back-to-back built-up cold-formed stainless-steel lipped channels as compression members are becoming increasingly popular. The advantages of using stainless-steel as structural members are corrosion resistance and durability, compared with carbon steel. The AISI/ASCE Standard, SEI/ASCE-8-02 and AS/NZS do not include the design of stainless-steel built-up channels and very few experimental tests or finite element analyses have been reported in the literature for such back-to back cold-formed stainless-steel channels. Current guidance by the American Iron and Steel Institute (AISI) and the Australian and New Zealand (gAS/NZS) standards for built-up carbon steel sections only describe a modified slenderness approach, to consider the spacing of the intermediate fasteners. Thus, this paper presents a numerical investigation on the behavior of back-to-back cold-formed stainless-steel built-up lipped channels. Three different grades of stainless steel i.e., duplex EN1.4462, ferritic EN1.4003 and austenitic EN1.4404 have been considered. Effect of screw spacing on the axial strength of such built-up channels was investigated. As expected, most of the short and intermediate columns failed by either local-global or local-distortional buckling interactions, whereas the long columns, failed by global buckling. All three grades of stainless-steel stub columns failed by local buckling. A comprehensive parametric study was then carried out covering a wide range of slenderness and different cross-sectional geometries to assess the performance of the current design guidelines by AISI and AS/NZS. In total, 647 finite element models were analyzed. From the results of the parametric study, it was found that the AISI & AS/NZS are conservative by around 10 to 20% for cold-formed stainless-steel built-up lipped channels failed through overall buckling, irrespective of the stainless-steel grades. However, the AISI and AS/NZS can be un-conservative by around 6% for all three grades of stainless-steel built-up channels, which failed by local buckling.

• Structural Engineering and Mechanics
• /
• 제70권4호
• /
• pp.499-511
• /
• 2019

In this study, the axial compressive behavior of novel quadruple C-channel built-up cold-formed steel columns with different slenderness ratio was investigated, using the experimental and numerical analysis. The axial compressive capacity and failure modes of the columns were obtained and analyzed. The finite element models considering the geometry, material and contact nonlinearity were developed to simulate and analyze the structural behavior of the columns further. There was a great correlation between the numerical analyses and test results, which indicated that the finite element model was reasonable and accurate. Then influence of, slenderness ratio, flange width-to-thickness ratio and screw spacing on the mechanical behavior of the columns were studied, respectively. The tests and numerical results show that due to small slenderness ratio, the failure modes of the specimens are generally local buckling and distortional buckling. The axial compressive strength and stiffness of the quadruple C-channel built-up cold-formed steel columns decrease with the increase of maximum slenderness ratio. When the screw spacing is ranging from 150mm to 450mm, the axial compressive strength and stiffness of the quadruple C-channel built-up cold-formed steel columns change little. The axial compressive capacity of quadruple C-channel built-up cold-formed steel columns increases with the decrease of flange width-thickness ratio. A modified effective length factor is proposed to quantify the axial compressive capacity of the quadruple C-channel built-up cold-formed steel columns with U-shaped track in the ends.

• Structural Engineering and Mechanics
• /
• 제84권3호
• /
• pp.423-435
• /
• 2022

In this article, we present torsion-bending analysis of a composite FGM beam with an open section, according to the advanced and refined theory of 1D / 3D beams based on the 3D Saint-Venant's solution and taking into account the edge effects. The (initially one-dimensional) model contains a set of three-dimensional (3D) displacement modes of the cross section, reflecting its 3D mechanical behaviour. The modes are taken into account depending on the mechanical characteristics and the geometrical form of the cross-section of the composite FGM beam. The model considered is implemented on the CSB (Cross-Section and Beam Analysis) software package. It is based on the RBT/SV theory (Refined Beam Theory on Saint-Venant principle) of FGM beams. The mechanical and physical characteristics of the FGM beam continuously vary, depending on a power-law distribution, across the thickness of the beam. We compare the numerical results obtained by the three-beam theories, namely: The Classical Beam Theory of Saint-Venant (Classical Beam Theory CBT), the theory of refined beams (Refined Beam Theory RBT), and the theory of refined beams, using the higher (high) modes of distortion of the cross-section (Refined Beam Theory using distorted modes RBTd). The results obtained confirm a clear difference between those obtained by the three models at the level of the supports. Further from the support, the results of RBT and RBTd are of the same order, whereas those of CBT remains far from those of higher-order theories. The 3D stresses, strains and displacements, obtained by the present study, reflect the 3D behaviour of FGM beams well, despite the initially 1D nature of the problem. A validation example also shows a very good agreement of the proposed models with other models (classical or higher-order beam theory) and Carrera Unified Formulation 1D-beam model with Lagrange Expansion functions (CUF-LE).

• 한국보건간호학회지
• /
• 제18권2호
• /
• pp.312-329
• /
• 2004

This study was examined 718 workers who had consistent blood pressure results in 2001 and 2002 general health examinations that were held at a work places managed by a health care agency in Seoul. Significant results are found as follows by analysing SPSS 11.0 on the result of self-recorded questionnaires investigated from Mar 1, 2003 to April 30, 2003. 1. A sampled healthy group and a sampled unhealthy group had significant differences in four variables out of possible nineteens that are sex, age, marriage and occupation. The unhealthy group had more males than females, more aged (over 50 years old) than youngers (under 50 years old), more married than singles, more manufacturing workers than non-manufacturing workers. In the case of systolic blood pressure, as the healthy group had 16.52mmHg while that of the other group had 149. 58mmHg, 33.06mmHg of difference between those groups were detected. In the case of diastolic blood pressure, 74.93mmHg of the healthy group and 96.53mmHg of the unhealthy group yielded 21.60mmHg of difference between them. This result implies that a guidance of health care is required to be aware of 20-30mmHg volatility in blood pressure rate or to understand and treat properly own blood pressure. as it is difficult to detect hypertension in early stage due to no initial symptom. According to the result. an establishment of management system of workers, companies and health care agencies is required for consist health care. 2. In terms of risky habits to health, the unhealthy group had more proportion of past smokers, over-twice-a-week drinkers, people with higher obesity rate. However, in terms of excercise, the proportion of regularly exercising people is higher in the unhealthy group while that of non-exercising people is higher in the healthy group. On the other hand. the average grade of health practicing behaviour in two groups are not significantly different as the health group had 3.00 out of possible 6.00 while the other had 3.10. This result means that as workers are not interested in health practicing behaviour. health promoting programmes must be developed in such a way of various method of motivations and incentives. Particularly this implies that distortional objectives of exercises should be readjusted through health guidance. 3. Systolic blood pressure in the healthy group can be explained by sex and the obesity rate while that in the unhealthy group can be explained by subjective health awareness and the obesity. Diastolic blood pressure in the healthy group can be explained by sex and the obesity rate like the former. The obesity rate was significant variable affecting the blood pressure of both groups, and particularly the effect to the unhealthy group was remarkably higher than that to the healthy group. Therefore, this research identified that the health care on the blood pressure of workers is not only limited to hypertension patients, but also extended to all workers. In order for consistent care, an establishment of management system of workers, companies and health care agencies is required.