• Kyungpook Mathematical Journal
• /
• 제18권1호
• /
• pp.53-59
• /
• 1978

The coefficient problems of univalent functions was given by Bieberbach. As is well-known, Koebe distortion theorem has close connection with the coefficient problems of univalent functions. It is purpose of this paper to give the distortion theorems for fractional integral and derivative of univalent functions.

• ETRI Journal
• /
• 제29권5호
• /
• pp.559-568
• /
• 2007

This paper presents a new distortion control scheme with a simple estimation model for the propagation errors incurred by dropping some parts of the bitstream in a frame dropping-coefficient dropping (FD-CD) transcoder. The primary goal of this paper is to facilitate bit-rate conversions and rate-distortion controls in the compressed domain without introducing a full decoding and reencoding system in the pixel domain. First, the error propagation behavior over several frame sequences due to coefficient dropping is investigated on the basis of statistical and empirical properties. Then, such properties are used to develop a simple estimation model for the CD distortion accounting for the characteristics of the underlying coded-frame. Finally, the proposed estimation model allows us to determine the amount of coefficient dropping and to effectively allocate rate-distortions into coded-frames. Experimental results show that the proposed estimation model accurately describes the characteristics of propagation errors adaptively in the compressed domain and can be easily applied to distortion control over different kinds of video sequences.

• 대한조선학회논문집
• /
• 제45권1호
• /
• pp.93-100
• /
• 2008

There are two ways of conventional thermal distortion analysis. One is the thermal elasto-plastic analysis and the other is the equivalent forces method based on inherent strain. The former needs exorbitant analysis time, while the latter cannot obtain results of stress field and it needs much time consumption with loads modeling on curved plates. Such faults in two methods have made difficulties in thermal distortion analysis of a large structure like ship hull. In order to solve them, new kind of thermal distortion analysis method was developed. We devised that the inherent strains was used as direct input factors in forms of boundary conditions. It was embodied by using thermal expansion coefficient in commercial code. We used the pre-calculated inherent strain as thermal expansion coefficient, and endowed nodes with imaginary temperatures. This method was already adopted at hull block welding distortion analysis which was considered as impossible, and gave productive results such as reduction of work time in the dry dock.

• 정보처리학회논문지B
• /
• 제10B권4호
• /
• pp.373-380
• /
• 2003

대부분의 저가형 디지털 카메라에 사용되는 광학계의 경우 상대적으로 심한 렌즈 왜곡을 보이고 있다. 본 연구의 목적은 렌즈의 기하학적 왜곡에 의한 영상 품질의 저하를 보정하려는 것으로 Tsai의 카메라 캘리브레이션 방법을 단순화한 렌즈 왜곡 변수 계산 방법 및 계산된 렌즈 왜곡 변수를 이용하여 왜곡된 원영상을 이미지 워핑을 통해 보정하는 방법을 제안한다. 렌즈 왜곡 변수 계산 단계에서는 카메라 캘리브레이션 과정의 단순화를 위해 scale factor ratio 및 이미지 센터를 처리하는 실질적인 방식에 대해 보고하며 정량적인 이미지 품질 척도를 이용하여 왜곡보정 효과를 측정함으로써 제안된 방법의 타당성을 보인다. 한편, 렌즈 왜곡 변수 계산 단계에서의 결과를 바탕으로 이미지 워핑을 적용하기 위해 역공간 매핑 방식을 적용하는 경우 본 연구에서 적용된 방사상 렌즈 왜곡 모델의 정확한 해를 구하기 위해서는 3차 방정식의 해를 구하여야 한다. 본 논문에서는 정보기기로의 내장형 구현에 필수적인 실시간 처리를 목적으로 2차 방정식으로의 근사화 방법을 제안한다. 실험을 통하여 제안된 근사화 방법의 실시간 구현 가능성을 보이며 아울러 3차 방정식의 해를 이용한 이미지 워핑의 경우와 성능이 동등함을 보인다.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2008년도 정보통신설비 학술대회
• /
• pp.201-204
• /
• 2008

In this paper a new steganographic method is presented with minimum distortion. This paper focused on DCT rounding error and optimized that in a very easy way, resulting stego image has less distortion than other existing methods. The proposed method compared with F5 steganography algorithm, and the proposed method achieved better performance. This paper considered the DCT rounding error for lower distortion with possibly higher embedding capacity.

• ETRI Journal
• /
• 제33권5호
• /
• pp.814-817
• /
• 2011

In this letter, the distributions of direct current (DC) coefficients for P-frames in H.264/AVC are analyzed, and the distortion model of the Gaussian source under the quantization of the dead-zone plus-uniform threshold quantization with uniform reconstruction quantizer is derived. Experimental results show that the DC coefficients of P-frames are best approximated by the Laplacian distribution and the Gaussian distribution at small quantization step sizes and at large quantization step sizes, respectively.

• 한국정밀공학회지
• /
• 제16권3호통권96호
• /
• pp.198-207
• /
• 1999

This paper presents an accurate algorithm for geometric calibration of X-ray imaging system. Calibration is a very important process for improving an imaging system performance. There has been a lot of previous works using linear camera modeling technique, where lens distortion is neglected and/or center of distortion is assumed to be known. Geometrical distortion of image intensifier, however, is very large and its center of distortion should be calculated. This paper presents a new calibration method to estimate the intensifier position and orientation, scale factor, distortion coefficient, magnification factor, and center of distortion using the least square method. We investigate the properties of the algorithm by computer simulation. Simulation results show that the parameters can be estimated accurately using the proposed algorithm.

• Journal of electromagnetic engineering and science
• /
• 제3권2호
• /
• pp.79-85
• /
• 2003

In this paper, we investigated the degree of compensation for distorted optical pulse of wavelength division multiplexed(WDM) channel with initial frequency chirp generated in optical transmitter. The WDM channel signal distortion is due to chromatic dispersion, self phase modulation(SPM) and cross phase modulation(XPM) in fiber. The considered system is 3 ${\times}$ 40 Gbps intensity modulation direct detection(IM/DD) WDM transmission systems, which adopted mid-span spectral inversion(MSSI) as compensation method. We confirmed that the effect of initial frequency chirp on compensation for signal distortion due to a SPM is gradually decreased as a dispersion coefficient of fiber becomes gradually small. But, in the aspect of a compensation for signal distortion due to both SPM and XPM, the effect of initial frequency chirp on compensation is gradually decreased as a dispersion coefficient of fiber becomes gradually large.

• 소성∙가공
• /
• 제23권8호
• /
• pp.475-481
• /
• 2014

Water quenching is one method of cooling after hot forming, which is presently being used for the manufacturing of automobile parts. The formed parts at room temperature are heated and then cooled rapidly in a water bath to produce high strength. The formed parts may undergo excessive thermal distortion during the water quench. In order to predict the distortion during water quenching, a coupled thermo-mechanical simulation is needed. In the current study, the simulation of heating and cooling of boron steel cylinders was performed. The material properties for the simulation were calculated from JMatPro, and the convective heat transfer coefficient was obtained from experimental tests. The results show that the thermal distortion and the residual stresses are well predicted by the coupled simulation.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.694-699
• /
• 2002

In autobody assembly, thin-wall, tubular connections have been used for the frame structure. Recent interest in light materials, such as aluminum or magnesium alloys, has been rapidly growing for weight reduction and fuel efficiency. Due to higher thermal expansion coefficient, low stiffness/strength, and low softening temperature of aluminum and magnesium alloys, control of welding-induced distortion in these connections becomes a critical issue. In this study, the material sensitivity to welding distortion was investigated using a T-tubular connection of three types materials; low carbon steel (A500 Gr. A), aluminum alloy (5456-H116) and magnesium alloy (AZ91C-T6). An uncoupled thermal and mechanical finite element analysis scheme using the ABAQUS software program was developed to model and simulate the welding process, welding procedure and material behaviors. The predicted angular distortions were correlated to the cumulative plastic strains. A unique relationship between distortion and plastic strains exists for all three materials studied. The amount of distortion is proportional to the magnitude and distribution of the cumulative plastic strains in the weldment. The magnesium alloy has the highest distortion sensitivity, followed by the other two materials with the steel connection having the least distortion. Results from studies of thin-aluminum plates show that welding distortion can be minimized by reducing the cumulative plastic strains by preventing heat diffusion into the base metal using a strong heat sink placed directly beneath the weld. A rapid cooling method is recommended to reduce welding distortion of magnesium tubular connections.