• Composites Research
• /
• v.37 no.3
• /
• pp.162-169
• /
• 2024

In this study, PAN(polyacrylonitrile)-based precursor fibers were produced through a wet-spinning process, and their morphologies and graphitization behavior were investigated in the presence of two graphitization catalysts (Ca, Ni). The graphitization catalysts were introduced into the formed pores during hot-water stretching of wet-spun PAN-based precursor fibers. The catalytic effects of graphitization catalysts were examined through crystal structure and Raman analysis. At a relatively low temperature of 1500℃, the graphitization was not significantly affected, whereas at a high temperature of 2400℃, the obtained I_D/I_G value of graphite fiber (GF-Ni100) was decreased by about twice (~0.28) compared to the untreated fibers (GF-AS~0.54). By comparing the I_D/I_G values (GF-Ca100~0.42: GF-Ni100~0.28) of Ca and Ni graphitization catalyst, it was found that the degree of graphitization of Ni graphitization catalyst showed higher influence than that of Ca graphitization catalyst. Moreover, 2D band was also observed, indicating that the graphite plane structures composed of multiple layers were developed. XRD results confirmed that the crystal inter-planar distance (d₀₀₂) of the graphite crystal was slightly decreased after the treatment with the graphitization catalyst, But, the crystal size of Ca-treated graphite fiber (GF-Ca100) was increased by up to ~5 nm.

• Journal of Korean Society of Water and Wastewater
• /
• v.37 no.6
• /
• pp.425-435
• /
• 2023

Organoleptic parameters such as color, odor, and flavor influence consumer perception of drinking water quality. This study aims to evaluate the taste of the selected bottled and tap water samples using an electronic tongue (E-tongue) instead of a sensory test. Bottled and tap water's mineral components are related to the overall preference for water taste. Contrary to the sensory test, the potentiometric E-tongue method presented in this study distinguishes taste by measuring the mineral components in water, and the data obtained can be statistically analyzed. Eleven bottled water products from various brands and one tap water from I city in Korea were evaluated. The E-tongue data were statistically analyzed using multivariate statistical tools such as hierarchical clustering analysis (HCA), principal component analysis (PCA), and partial least squares discriminant analysis (PLS-DA). The results show that the E-tongue method can clearly distinguish taste discrimination in drinking water differing in water quality based on the ion-related water quality parameters. The water quality parameters that affect taste discrimination were found to be total dissolved solids (TDS), sodium (Na+), calcium (Ca²⁺), magnesium (Mg²⁺), sulfate (SO₄^2-), chloride (Cl^-), potassium (K⁺) and pH. The distance calculation of HCA was used to quantify the differences between 12 different types of drinking water. The proposed E-tongue method is a practical tool to quantitatively evaluate the differences between samples in water quality items related to the ionic components. It can be helpful in quality control of drinking water.

• Journal of the Korean Geotechnical Society
• /
• v.40 no.4
• /
• pp.169-178
• /
• 2024

While stable mid- to large-scale underground hydrogen storage infrastructures are needed to meet the rapidly increasing demand for hydrogen energy, evaluating the safety of explosion vibrations in adjacent buildings is becoming important because of gas explosions in underground hydrogen storage facilities. In this study, a numerical analysis of vibration safety effects on nearby building structures was performed assuming a hydrogen gas explosion disaster scenario in a low-depth underground hydrogen storage facility. A parametric study using a meta-model was conducted to predict changes in ground dynamic behavior for each combination of ground properties and to analyze sensitivity to geotechnical influencing factors. Directly above the hydrogen storage facility, the unit weight of the ground had the greatest influence on the change in ground vibration due to the explosion, whereas, farther away from the facility, the sensitivity of dynamic properties was found to be high. In addition, in evaluating the vibration stability of ground building structures based on the predicted ground vibration data and blasting vibration tolerance criteria, in the case of large reinforced concrete building structures, the ground vibration safety was guaranteed with a separation distance of about 10-30 m.

• Management & Information Systems Review
• /
• v.34 no.5
• /
• pp.191-212
• /
• 2015

Unlike the existing researches related to salespersons, this study intends to place the focus on salespersons' psychological characteristic as an element affecting their selling behavior. This is because employees' psychological characteristic is very likely to affect their devotion and commitment to relationship with customers and long-term production by a company. In particular, salespersons are likely to get a feeling of fatigue or loss, or make a cynical or cold response to customers because of frequent interaction with them, and to show emotional indifference in an attempt to keep their distance from customers. But the likelihood can vary depending on salespersons' own psychological characteristic; in particular, the occurrence of these phenomena is very likely to vary significantly depending on relationship belief in interpersonal relations. In the field of psychology, under way are researches related to personal psychological characteristics to improve the quality of interpersonal relations and to maximize personal performance and enhance situational adaptability during this process; it is a personal relationship belief that is recently mentioned as such a psychological characteristic. For salespersons having frequent interaction with customers, particularly, relationship belief can be a very important element in forming relations with customers. So this study aims at determining how salespersons' relationship belief affects negative emotion regulation strategies and prosocial behavior to customer. As a result, salespersons' relationship belief was found to have effects on their negative emotion regulation strategies and prosocial behavior to customer. Negative emotion regulation strategies was found to have effects on prosocial behavior. Salespersons with intimate relationship belief try to use active regulation, support-seeking regulation and salespersons with controlling relationship belief try to use avoidant/distractive regulation. Intimate relationship belief was found to have more prosocial behavior, controlling relationship belief was found to have less prosocial behavior to customer. salespersons' negative emotion regulation strategies was found to have effects on their prosocial behavior to customer. Active, support-seeking influence prosocial behavior to customer positively, avoidant/distractive regulation influence prosocial behavior to customer negatively.

• Journal of Global Scholars of Marketing Science
• /
• v.19 no.2
• /
• pp.5-16
• /
• 2009

Against the backdrop of the increasing trend towards economic globalisation, many international firms are indicating that decisions on how to enter foreign markets remains one of the key strategic challenges confronting them. Despite the rich body of literature on the topic, the fact that these challenges have continued to dominate global marketing strategy discourses point to someevident lacunae. Accordingly, this paper considers the variables, categorised in terms of firm contexts (standardisation, market research, competition, structure, competitive advantage) and host country-contexts (economic development, cultural differences, regulation and political risk), which influence the degree of involvement of UK companies in overseas markets. Following hypotheses were drawn from literature review: H1: The greater the level of competition, the higher the degree of involvement in the overseas market. H2: The more centralised the firm's organisation structure, the higher the degree of involvement in the overseas market. H3a: The adoption of a low cost-approach to competitive advantage will lead to a higher degree of involvement. H3b: The adoption of an innovation-approach to competitive advantage will lead to a higher degree of involvement. H3c: The adoption of a market research approach to competitive advantages will lead to a higher degree of involvement. H3d: The adoption of a breadth of strategic target-approach to competitive advantage will lead to a lower degree of involvement. H4: The higher the degree of standardisation of the international marketing mix the higher the degree of involvement. H5: The greater the degree of economic development in the host market, the higher the degree of involvement. H6: The greater the cultural differences between home and host countries, the lower the degree of involvement. H7: The greater the difference in regulations between the home country and the host country, the lower the degree of involvement. H8: The higher the political risk in the host country, the lower the degree of involvement. A questionnaire instrument was constructed using, wherever possible, validated measures of the concepts to serve the aims of this study. Following two sets of mailings, 112 usable completed questionnaires were returned. Correlation analysis and multiple regression analysis were used to analyze data. Statistically, the paper suggests that factors relating to the level of competition, competitive advantages and economic development are strong in influencing foreign market involvements. On the other hand, unexpectedly, cultural factors (especially individualism/collectivism and low and high power distance dimensions) proved to have weak moderating effects. The reason for this, in part, is due to the pervading forces of globalisation and the attendant effect on global marketing. This paper has contributed to the general literature in a way that point to two mainimplications. First, with respect to research on national systems, the study may hold out some important lessons especially for developing nations. Most of these nations are known to be actively seeking to understand what it takes to attract foreign direct investment, expand domestic market and move their economies from the margin to the mainstream global economy. Second, it should be realised that competitive conditions remain in constant flux (even in mature industries and mature economies). This implies that a range of home country factors may be as important as host country factors in explaining firms' strategic moves and the degree of foreign market involvement. Further research can consider the impact of the home country environment on foreign market involvement decisions. Such an investigation will potentially provide further perspectives not only on the influence of national origin but also how home country effects are confounded with industry effects.

• Asia pacific journal of information systems
• /
• v.21 no.3
• /
• pp.71-96
• /
• 2011

Within the traditional medical delivery system, patients residing in medically vulnerable areas, those with body movement difficulties, and nursing facility residents have had limited access to good healthcare services. However, Information and Communication Technology (ICT) provides us with a convenient and useful means of overcoming distance and time constraints. ICT is integrated with biomedical science and technology in a way that offers a new high-quality medical service. As a result, rapid technological advancement is expected to play a pivotal role bringing about innovation in a wide range of medical service areas, such as medical management, testing, diagnosis, and treatment; offering new and improved healthcare services; and effecting dramatic changes in current medical services. The increase in aging population and chronic diseases has caused an increase in medical expenses. In response to the increasing demand for efficient healthcare services, a telehealth service based on ICT is being emphasized on a global level. Telehealth services have been implemented especially in pilot projects and system development and technological research. With the service about to be implemented in earnest, it is necessary to study its overall acceptance by consumers, which is expected to contribute to the development and activation of a variety of services. In this sense, the study aims at positively examining the structural relationship among the acceptance factors for telehealth services based on the Technology Acceptance Model (TAM). Data were collected by showing audiovisual material on telehealth services to online panels and requesting them to respond to a structured questionnaire sheet, which is known as the information acceleration method. Among the 1,165 adult respondents, 608 valid samples were finally chosen, while the remaining were excluded because of incomplete answers or allotted time overrun. In order to test the reliability and validity of the assessment scale items, we carried out reliability and factor analyses, and in order to explore the causal relation among potential variables, we conducted a structural equation modeling analysis using AMOS 7.0 and SPSS 17.0. The research outcomes are as follows. First, service quality, innovativeness of medical technology, and social influence were shown to affect perceived ease of use and perceived usefulness of the telehealth service, which was statistically significant, and the two factors had a positive impact on willingness to accept the telehealth service. In addition, social influence had a direct, significant effect on intention to use, which is paralleled by the TAM used in previous research on technology acceptance. This shows that the research model proposed in the study effectively explains the acceptance of the telehealth service. Second, the research model reveals that information privacy concerns had a insignificant impact on perceived ease of use of the telehealth service. From this, it can be gathered that the concerns over information protection and security are reduced further due to advancements in information technology compared to the initial period in the information technology industry, and thus the improvement in quality of medical services appeared to ensure that information privacy concerns did not act as a prohibiting factor in the acceptance of the telehealth service. Thus, if other factors have an enormous impact on ease of use and usefulness, concerns over these results in the initial period of technology acceptance may become irrelevant. However, it is clear that users' information privacy concerns, as other studies have revealed, is a major factor affecting technology acceptance. Thus, caution must be exercised while interpreting the result, and further study is required on the issue. Numerous information technologies with outstanding performance and innovativeness often attract few consumers. A revised bill for those urgently in need of telehealth services is about to be approved in the national assembly. As telemedicine is implemented between doctors and patients, a wide range of systems that will improve the quality of healthcare services will be designed. In this sense, the study on the consumer acceptance of telehealth services is meaningful and offers strong academic evidence. Based on the implications, it can be expected to contribute to the activation of telehealth services. Further study is needed to assess the acceptance factors for telehealth services, such as motivation to remain healthy, health care involvement, knowledge on health, and control of health-related behavior, in order to develop unique services according to the categorization of customers based on health factors. In addition, further study may focus on various theoretical cognitive behavior models other than the TAM, such as the health belief model.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.1
• /
• pp.53-64
• /
• 2008

Statement of problem: Peri-implant marginal bone loss is an important factor that affects the success of implants in esthetics and function. Various efforts have been made to reduce this bone loss by improving implant design and surface texture. Previous studies have shown that early marginal bone loss is affected by implant neck designs. Purpose: The purpose of this study was to examine the influence of laser microtexturing of implant collar on peri-implant marginal bone loss. Materials and methods: Radiographical marginal bone loss was examined in patients treated with implant-supported fixed partial dentures. Marginal bone level was examined with 101 implant fixtures installed in 53 patients at three periods(at the time of implantation, prosthetic treatment and 6-month after loading). Four types of implants were examined. The differences of bone loss between implants(ITI standard) with enough biologic width and implants(ITI esthetic plus, Silhouette IC, Silhouette IC Laser-$Lok^{TM}$) with insufficient biologic width have been compared. Resorption angles were examined at the time of prosthetic delivery and 6-month after loading. Results and Conclusion: Within the limitation of this study, the following results were drawn. 1. The marginal bone loss of ITI standard and Silhouette IC Laser-$Lok^{TM}$ was less than that of ITI esthetic plus and Silhouette IC(P<0.05). The marginal bone loss between ITI standard and Silhouette IC Laser-$Lok^{TM}$ had no significant statistical difference(P>0.05). There was no significant statistical difference between marginal bone loss of ITI esthetic plus and Silhouette IC(P>0.05). 2. There was no significant difference in marginal bone loss between maxilla and mandible(P>0.05). 3. There was no significant difference in resorption angle among four types of implants(P>0.05). The marginal bone of implants with supracrestal collar design of less than that of biologic width had resorbed more than those with sufficient collar length. The roughness and laser microtexturing of implant neck seem to affect these results. If an implant with collar length of biologic width, exposure of fixture is a possible complication especially in the anterior regions of dentition that demand high esthetics. Short smooth neck implant are often recommended in these areas which may lack the distance between microgap and the marginal bone level. In these cases, the preservation of marginal bone must be put into consideration. From the result of this study, it may be concluded that laser microtexturing of implant neck is helpful in the preservation of marginal bone.

• Journal of the Korean Geosynthetics Society
• /
• v.13 no.2
• /
• pp.1-10
• /
• 2014

In this study, two different types of dredged fill injection methods are introduced and filling experiments were conducted to analyze the impact of each technique to the distribution and deposition of dredged soil fill and how it influence the final tube shape. Two transparent plastic tubes were fabricated to observe the deposition behavior of the deposited fill material. Both tubes measured 4.0 meters in length (L) and has vinyl tube diameters (D) of 0.5m and 0.7m. T-type and I-type inlet system are also introduced in this paper. The influence of this inlet systems to the distribution and deposition behavior of dredged soil fill inside the vinyl tubes were observed during the experiment. After the sedimentation of the slurry mixture, the water on top of the soil sediments are removed and the slurry mixture was re-injected into the vinyl tube, this process was carried out repeatedly. The shape changes of the vinyl tube, e.g. the changes in both tube height and width, are constantly monitored after each slurry injection and water draining phases. Crater formation was observed in the case of I-Type inlet system and a non-uniform sediment distribution occurred. For the diffusion deposit of soil particles to long distance are minimal shape technique using the T-Type inlet system. Therefore the undrain filling height ratio ($H/D_0$) was found to be around 0.54 to 0.64 and the horizontal strain ratio ($W/D_0$) ranges from 1.45 to 1.54. The filling soil height is proportional to dredged-material filling phases, but, horizontal strain ratio is constant or inversely reduced so that the center of tube body is raised in the upward direction.

• Journal of the Korean Society of International Agriculture
• /
• v.30 no.4
• /
• pp.347-356
• /
• 2018

Genetically modified (GM) crops have been increased continuously over the world and concerns about the potential risks of GM crops have also been increasing. Even though GM crops have not been cultivated commercially in Korea, it should be necessary to develop the safety assesment technology for GM crops. In this study, we investigated the influence of heading date difference on gene flow from GM to non-GM rice. In the experimental plot design, The PAC GM rice was placed in the center as a pollen donor and non-GM rice were placed in eight directions as pollen receivers. Five pollen receiver rice cultivars were Unkawng, Daebo, Saegyejinmi, Nakdong-byeo, and Ilmi which had different flowering times. A total of 266,436, 300,237, 305,223, 273,373, and 290,759 seeds were collected from Unkawng, Daebo, Saegyejinmi, Nakdong, and Ilmi, respectively, which were planted around PAC GM rice. The GM${\times}$non-GM hybrids were detected by repeated spraying of herbicide and PAT immunostrip assay. Finally, the hybrids were confirmed by PCR analysis using PAC gene specific primer. The hybrids were found in Nakdong-byeo which had the same heading date with PAC GM rice. The hybridization rate was 0.0007% at Nakdong-byeo plot. All of GM${\times}$non-GM hybrids were located within 2 m distance from the PAC GM rice zone. The physiological elements including rice heading date were found to be important factors to determine GM?rice out crossing rate with GM rice. Consideration should be taken into for many factors like the physiological elements of field heading date of rice cultivars to set up the safety management guideline for prevention of GM rice gene flow.

• Journal of Intelligence and Information Systems
• /
• v.26 no.4
• /
• pp.67-86
• /
• 2020

Recommender Systems have been huge influence users and business more and more. Recently the importance of E-commerce has been reached rapid growth greatly in world-wide COVID-19 pandemic. Recommender system is the center of E-commerce lively. Top ranked E-commerce managers mentioned that recommender systems have a major influence on customer's purchase such as about 50% of Netflix, Amazon sales from their recommender systems. Most algorithms have been focused on improving accuracy of recommender system regardless of novelty, diversity, serendipity etc. Recommender systems with only high accuracy cannot satisfy business long-term profit because of generating sales polarization. In addition, customers do not experience enjoyment of shopping from only focusing accuracy recommender system because customer's preference is changed constantly. Therefore, recommender systems with various values need to be developed for user's high satisfaction. Reranking is the most useful methodology to realize diversity of recommender system. In this paper, diversity of recommender system is represented through constructing high similarity with users who have different preference using each user's purchased item's category algorithm. It is distinguished from past research approach which is changing the algorithm of recommender system without user's diversity preference level. We tried to discover user's diversity preference level and observed the results how the effect was different according to user's diversity preference level. In addition, graph-based recommender system was used to show diversity through user's network, not collaborative filtering. In this paper, Amazon Grocery and Gourmet Food data was used because the low-involvement product, such as habitual product, foods, low-priced goods etc., had high probability to show customer's diversity. First, a bipartite graph with users and items simultaneously is constructed to make graph-based recommender system. However, each users and items unipartite graph also need to be established to show diversity of recommender system. The weight of each unipartite graph has played crucial role changing Jaccard Distance of item's category. We can observe two important results from the user's unipartite network. First, the user's diversity preference level is observed from the network and second, dissimilar users can be discovered in the user's network. Through the research process, diversity of recommender system is presented highly with small accuracy loss and optimalization for higher accuracy is possible controlling diversity ratio. This paper has three important theoretical points. First, this research expands recommender system research for user's satisfaction with various values. Second, the graph-based recommender system is developed newly. Third, the evaluation indicator of diversity is made for diversity. In addition, recommender systems are useful for corporate profit practically and this paper has contribution on business closely. Above all, business long-term profit can be improved using recommender system with diversity and the recommender system can provide right service according to user's diversity level. Lastly, the corporate selling low-involvement products have great effect based on the results.