• Korean Journal of Optics and Photonics
• /
• v.20 no.3
• /
• pp.156-165
• /
• 2009

We theoretically derive the set of general paraxial zoom locus equations for all zoom lens systems with finite object distance, including the infinite object distance case, by using the Gaussian bracket method and matrix representation of paraxial ray tracing. We make the zoom locus program by means of a numerical calculation method according to these equations in Visual Basic Language. Consequently, the solutions of this method can be consistently and flexibly used in all types of zoom lens in the step of initial design about zoom loci. Finally, in order to verify the justification and usefulness of this method, we show that two examples, such as $M_{4a}$ and $M_{4h}$ types of 4 groups, and one example, $M_{5n}$ type of 5 groups, which are very complicated zoom lens systems, can be rapidly and diversely traced through various interpolations by using this program.

• Journal of Aquaculture
• /
• v.17 no.1
• /
• pp.12-23
• /
• 2004

Genomic DNAs were extracted from the muscle of twenty-two specimens of two shortnecked clam, Ruditapes phifippinarum populations collected in Anmyeondo and Seocheon. Genetic differences within and between populations were analysed by random amplified polymorphic DNAs-polymerase chain reaction (RAPD-PCR) using twenty arbitrary decamer primers. Out of 20 primers, 6 generated a total of 1,111 major and minor RAPD bands from individuals of two sites, producing approximately 4.2 average polymorphic bands per primer in individuals from Anmyeondo and ranging in size from less than 50 to larger than 1,500 base pairs (bp). The electrophoretic analysis of RAPD products amplified showed moderate levels of similarity among the different individuals in Seo-cheon population. The average bandsharing values (BS value) of the samples within population from Anmyeondo ranged from 0.155 to 0.684, whereas it was 0.143∼0.782 within population from Seocheon. The average BS value between individuals No. 13 and No. 14 from Seocheon was 0.782 which was higher than that of those from Anmyeondo. The single linkage dendrogram resulted from three primers (OPA-08, -09 and -20), indicating six genetic groupings composed of group 1 (No.4, 8 and 10), group 2 (No. 18), group 3 (No.2, 5 and 7), group 4 (No. 1, 3, 6, 9, 11, 12, 13, 14, 15 and 17), group 5 (16, 19 and 20) and group 6 (No. 21 and 22). In the Seocheon population, the individual No. 18 clustered distinctly from the others of this population. The observed genetic distance between the two populations from Anmyeondo and Seocheon was more than 0.209 (0.247 and 0.275). The shortest genetic distance (0.094) displaying significant molecular differences was between individuals No. 13 and No. 14. Especially, the genetic distance between individuals No. 22 and the remnants among individuals in two geographical populations was highest (0.275). This result illustrated that individual No.22 is distinct from other individuals within two shortnecked populations. The different geographical features of two sites may have caused the genetic diversity in two shortnecked clam populations.

• Restorative Dentistry and Endodontics
• /
• v.14 no.1
• /
• pp.179-188
• /
• 1989

The purpose of this study was to measure Micro vicker's hardness of 4 kinds of anterior Composite resins (Pyrofil light bond anterior, Lite-fil anterior, Photo clear fil anterior, Silux) and 6 kinds of posterior Composite resin (Pyrofil light bond posterior. Lite-fil posterior, Photo clear fil posterior, Occlusin posterior, Palfique light posterior, P-30, posterior) according to deference of depth and distance of light tip from surface of composite resin. Each composite resin was filled into Teflon tube of 5mm in diameter and 5mm in depth, celluloid matrix was covered and the light in accordance with each composite resin was irradiated in distance of zero millimeter and 1 cm from light tip to surface of composite resin for 30 seconds. Specimens were sectioned longitudinally with cutting device. Microvicker's hardness measurements ware made at the depth of surface, 1mm, 2mm, 3mm, 4mm and 5mm from the surface to deep portion. Vicker's hardness numbers were taken on each depth under 200gm load for 30 seconds with MVK-E. The following results were: 1. The highest hardness value was measured at 1 mm depth. Then the deeper the depth, the lesser the hardness was observed. 2. The hardness value of anterior composite resins is lower than one of posterior composite resins. 3. Hardness number of composite resin irradiated in distance of zero millimeter from surface of composite resin was higher than one of 1 cm from surface of composite resin. 4. The pattern of hardness change at varying depth was similar to all the experimental material with no relation to distance of light from specimen.

• Journal of Plant Biotechnology
• /
• v.46 no.1
• /
• pp.1-8
• /
• 2019

The main goal of this study was to determine the genetic diversity among 36 grape cultivars grown in Palestine by using ISSR-polymerase chain reaction (PCR) fingerprints. Among the tested primers, 17 produced reasonable amplification products with high intensity and pattern stability. A total of 57 DNA fragments (loci) separated by electrophoresis on agarose gels were detected and they ranged in size, from 150 to 900 bp. Out of these fragments, 55 (88%) were polymorphic and 2 (3.5%) monomorphic. Our results also revealed an average of 3.1 loci per primer. A minimum of 1 and maximum of 10 DNA fragments were obtained (S-17, #820 and #841) and (S-31) primers, respectively. Therefore, the later primer (S-31) is considered to be the most powerful primer among the tested ones. The genetic distance matrix showed an average distance range of between 0.05 and 0.76. The maximum genetic distance value of 0.76 (24% similarity) was exhibited between the (Shami and Marawi.Hamadani.Adi) as well as (Bairuti and Marawi.Hamadani.Adi) genotypes. On the other hand, the lowest genetic distance of 0.05 (95% similarity) was exhibited between (Jandali.Tawel.Mofarad and Jandali. Kurawi.Mlzlz) along with (Shami.Aswad and Shami.mtartash. mlwn) genotypes. Furthermore, the UPGMA dendrogram generally clusters the grape cultivars into eight major clusters in addition to an isolated genotype. Based on these figures, the cultivars tested in this study could be characterized by large divergence at the DNA level. This is taking the assumption that our region has a very rich and varied clonal grape genetic structure.

• The Plant Pathology Journal
• /
• v.31 no.3
• /
• pp.226-244
• /
• 2015

Fusarium head blight is one of the most important and most common diseases of winter wheat. In order to better understanding this disease and to assess the correlations between different factors, 30 cultivars of this cereal were evaluated in a two-year period. Fusarium head blight resistance was evaluated and the concentration of trichothecene mycotoxins was analysed. Grain samples originated from plants inoculated with Fusarium culmorum and naturally infected with Fusarium species. The genetic distance between the tested cultivars was determined and data were analysed using multivariate data analysis methods. Genetic dissimilarity of wheat cultivars ranged between 0.06 and 0.78. They were grouped into three distinct groups after cluster analysis of genetic distance. Wheat cultivars differed in resistance to spike and kernel infection and in resistance to spread of Fusarium within a spike (type II). Only B trichothecenes (deoxynivalenol, 3-acetyldeoxynivalenol and nivalenol) produced by F. culmorum in grain samples from inoculated plots were present. In control samples trichothecenes of groups A (H-2 toxin, T-2 toxin, T-2 tetraol, T-2 triol, scirpentriol, diacetoxyscirpenol) and B were detected. On the basis of Fusarium head blight assessment and analysis of trichothecene concentration in the grain relationships between morphological characters, Fusarium head blight resistance and mycotoxins in grain of wheat cultivars were examined. The results were used to create of matrices of distance between cultivars - for trichothecene concentration in inoculated and naturally infected grain as well as for FHB resistance Correlations between genetic distance versus resistance/mycotoxin profiles were calculated using the Mantel test. A highly significant correlation between genetic distance and mycotoxin distance was found for the samples inoculated with Fusarium culmorum. Significant but weak relationships were found between genetic distance matrix and FHB resistance or trichothecene concentration in naturally infected grain matrices.

• Journal of the Korean Regional Science Association
• /
• v.33 no.1
• /
• pp.29-41
• /
• 2017

This study proposes an integrated accessibility measurement algorithm, which is applied to the Seoul Metropolitan public transportation system consisting of bus and subway networks, and analyzes the result. We construct a public transportation network graph linking bus-subway networks and take the time distance as the link weight in the graph. We develop a time-distance algorithm to measure the time distance between each pair of transit stations based on the T-card transaction database. The average travel time between nodes has been computed via the shortest-path algorithm applied to the time-distance matrix, which is obtained from the average speed of each transit route in the T-card transaction database. Here the walking time between nodes is also taken into account if walking is involved. The integrated time-distance accessibility of each node in the Seoul Metropolitan public transportation system has been computed from the T-card data of 2013. We make a comparison between the results and those of the bus system and of the subway system, and analyze the spatial patterns. This study is the first attempt to measure the integrated time-distance accessibility for the Seoul Metropolitan public transportation system consisting of 16,277 nodes with 600 bus routes and 16 subway lines.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.2059-2064
• /
• 2004

Texture analysis is an important role for automatic visual insfection. This paper presents an application of wavelet extension and Gray level co-occurrence matrix (GLCM) for detection of defect encountered in textured images. Texture characteristic in low quality images is not to easy task to perform caused by noise, low frequency and small dimension. In order to solve this problem, we have developed a procedure called wavelet image extension. Wavelet extension procedure is used to determine the frequency bands carrying the most information about the texture by decomposing images into multiple frequency bands and to form an image approximation with higher resolution. Thus, wavelet extension procedure offers the ability to robust feature extraction in images. Then the features are extracted from the co-occurrence matrices computed from the sub-bands which performed by partitioning the texture image into sub-window. In the detection part, Mahalanobis distance classifier is used to decide whether the test image is defective or non defective.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.9C
• /
• pp.889-896
• /
• 2006

The crest factor distribution of orthogonal frequency division multiplexing (OFDM) symbol sequences is evaluated and it is shown that OFDM symbol sequences with a short period are expected to have a high crest factor. The crest factor relationship between two input symbol sequences, Hamming distance D apart is also derived. Using these two results, we propose two criteria for a phase sequence set of the selected mapping (SLM) scheme and suggest the rows of the cyclic Hadamard matrix constructed from an m-sequence as the near optimal phase sequence set of the SLM scheme.

• Plant Biotechnology Reports
• /
• v.4 no.3
• /
• pp.237-242
• /
• 2010

Six parent and their 12 gamma ray-induced somatic flower colour mutants of garden rose were characterized to discriminate the mutants from their respective parents and understanding the genetic diversity using Random amplification of polymorphic DNA (RAPD) markers. Out of 20 primers screened, 14 primers yielded completely identical fragments patterns. The other 7 primers gave highly polymorphic banding patterns among the radiomutants. All the cultivars were identified by using only 7 primers. Moreover, individual mutants were also distinguished by unique RAPD marker bands. Based on the presence or absence of the 48 polymorphic bands, the genetic variations within and among the 18 cultivars were measured. Genetic distance between all 18 cultivars varied from 0.40 to 0.91, as revealed by Jaccard's coefficient matrix. A dendrogram was constructed based on the similarity matrix using the Neighbor Joining Tree method showed three main clusters. The present RAPD analysis can be used not only for estimating genetic diversity present in gamma ray-induced mutants but also for correct identification of mutant/new varieties for their legal protection under plant variety rights.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.5
• /
• pp.1754-1763
• /
• 2017

This paper analyses the characteristics of incomplete-journey double-circuit transmission lines on the same tower formed by single-circuit lines and double-circuit lines, and then presents a fault location algorithm based on identification of fault branch. With the relationship between the three-phase system and the double-circuit line system, a phase-mode transformation matrix for double-circuit lines can be derived. Based on the derived matrix, the double-circuit lines with faults can be decoupled, and then the fault location for an incomplete-journey double-circuit line is achieved by using modal components in the mode domain. The algorithm is divided into two steps. Firstly, the fault branch is identified by comparing the relationships of voltage amplitudes at the bonding point. Then the fault location, on the basis of the identification result, is calculated by using a two-terminal method, and only the fault distance of the actual fault branch can be obtained. There is no limit on synchronization of each terminal sampling data. The results of ATP-EMTP simulation show that the proposed algorithm can be applied within the entire line and can accurately locate faults in different fault types, fault resistances, and fault distances.