• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.12B
• /
• pp.1175-1182
• /
• 2010

In this paper, we implemented a digital circuit which is targeted on FPGA for estimating azimuth information and distance between aircraft and ground station. All functions for signal processing of TACAN were integrated into a FPGA. The proposed hardware consists of input interface, register file, decoder, signal generator and main controller block. The designed hardware includes a function to generating pulse pair group for azimuth information, a function to responding the interrogation of aircraft for estimating distance between aircraft and ground station, and a function to provide ID information of ground station. The proposed hardware was implemented with FPGA chipset of ALTERA and occupied with 7,071 logic elements.

• Journal of Navigation and Port Research
• /
• v.37 no.2
• /
• pp.195-201
• /
• 2013

Recently according to increase of enlarged scale ports in conformity with increase in over size vessels and container handling service, pollutants generated from ports are increasing. In advanced countries, reduction in carbon dioxide emission assigned to them has been implemented according to the Climate Change Convention and Kyoto Protocol from 2008 to 2012 in order to lessen carbon dioxide emission. Henceforth increase in discussion on the measure of constructing Green Port and low-carbon port is expected in our nation's field of port as well, it is considered that the effort in reduction with regard to undesirable output which causes environmental problem of analysis target during measuring effectiveness. Therefore, in this study, effectiveness was estimated through directional technology distance function considering undesirable output differently from effectiveness analysis of existing container terminal, and then performed comparative analysis with the result analyzed with BCC output-oriented model. As the result of analysis, in 2007 DMU3 and DMU5, and in 2010 DMU2 and DMU4 appeared to be efficient terminals in BCC output oriented model, and in directional technology distance function model, DMU1, DMU3 in 2007, DMU3, DMU5 in 2008, DMU7 in 2009, and DMU2, DMU5 in 2010 appeared to be efficient terminals.

• Journal of the Korean Mathematical Society
• /
• v.33 no.2
• /
• pp.259-268
• /
• 1996

The Data Encryption Standard(DES) [3, 8, 9] was developed by an IBM team aroung 1974 and adopted as a national standard in 1977.

• Bulletin of the Korean Mathematical Society
• /
• v.36 no.2
• /
• pp.287-303
• /
• 1999

The general solution of the functional equation f1(pr, qs) + f2(ps, qr) = g(p,q) + h(r,s) for p, q, r, s $\in$] 0, 1[will be investigated without any regularity assumptions on the unknown functions f1, f2, g, h:]0.1[->R.

• Journal of Broadcast Engineering
• /
• v.9 no.1
• /
• pp.2-7
• /
• 2004

In this paper, we proposed the content-based music information retrieval technique using some MPEG-7 low-level descriptors. Especially, pitch information and timbral features can be applied in music genre classification, music retrieval, or QBH(Query By Humming) because these can be modeling the stochasticpattern or timbral information of music signal. In this work, we restricted the music domain as O.S.T of movie or soap opera to apply broadcasting system. That is, the user can retrievalthe information of the unknown music using only an audio clip with a few seconds extracted from video content when background music sound greeted user's ear. We proposed the audio feature set organized by MPEG-7 descriptors and distance function by vector distance or ratio computation. Thus, we observed that the feature set organized by pitch information is superior to timbral spectral feature set and IFCR(Intra-Feature Component Ratio) is better than ED(Euclidean Distance) as a vector distance function. To evaluate music recognition, k-NN is used as a classifier

• Journal of the Regional Association of Architectural Institute of Korea
• /
• v.20 no.6
• /
• pp.47-54
• /
• 2018

The purpose of this study is to verify the long - range measurement performance for practical field application of VDMS. The reliability of the VDMS was verified by comparison with the existing monitoring sensor, GPS, Accelerometer and LDS. It showed the ability to accurately measure the dynamic displacement by tracking a motion of free vibration of target. And using the PSD function of measured data, the results in the frequency domain were also analyzed. We judged that VDMS is able to identify the higher system mode and has sufficient reliability. Based on the reliability verification, we conducted tests for long-distance applicability for actual application of VDMS. The distance from the stationary target model structure was increased by 50m interval, and the maximum distance was set to 400m. From the distance of 150m, the image obtained by the commercial camcorder has an error in the analysis, so the measured displacement comparison was performed between the LDS and the refractor telescope measurement results. In the measurement results of the displacement area of VDMS, the data validity was deteriorated due to the data shift by the external force and the quality degradation of the enlarged image. However, even under the condition that the effectiveness of the displacement measurement data of VDMS is low, the first mode characteristic included in the free vibration of the object is clearly measured. If the influence from the external environment is controlled and stable data is collected, It is judged that reliability of long-distance VDMS can be secured.

• Physical Therapy Korea
• /
• v.30 no.2
• /
• pp.152-159
• /
• 2023

Background: The gluteus medius (Gmed) plays a critical role in maintaining frontal plane stability of the pelvis during functional activities, such as one-leg lifting. Side-lying hip abduction (SHA) has been used as a dynamic test to evaluate Gmed function. However, the abduction force of the lower leg against the floor is not controlled during SHA. Therefore, hip abduction performance with contralateral adduction in the side-lying position (HAPCA) can be proposed as an alternative method to assess performance of hip abduction. If the number of HAPCA is related to the lateral pelvic shift distance, a new quantitative measurement for hip abductor function may be presented. Objects: This study aimed to investigate the relationship between the number of successful HAPCA and the lateral pelvic shift distance during one-leg lifting. Methods: Thirty healthy participants were recruited, and lateral pelvic shift distance was measured during one-leg lifting test using two-dimensional analysis. The number of successful HAPCA was counted when participants touched both target bars at the beat of a metronome. Results: There was a negative correlation between the number of HAPCA and lateral pelvic shift distance during one-leg lifting (r = -0.630, p < 0.05). The number of HAPCA accounted for 39.7% of the variance in the lateral pelvic shift distance during one-leg lifting (F = 18.454, p < 0.001). Conclusion: The number of successful HAPCA is significantly correlated with lateral pelvic shift distance during one-leg lifting. This finding suggests that HAPCA can be proposed as a new measurement for hip abductor performance and more research is needed on its relationship with hip abductor strength.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.5
• /
• pp.222-227
• /
• 1998

Collision warning systems have been an active research and development area as the interests and demands for ASV's (Advanced Safety Vehicles) have increased. This paper presents an experimental investigation of a collision warning system for automobiles. A collision warning HiLS(Hardware-in-the-Loop Simulation) system has been designed and used to test the collision warning algorithm, radar sensors, and warning displays under realistic operating conditions in the laboratory. the collision warning algorithm is operated by a warning index, which is a function of the warning distance and the braking distance. The computer calculates velocities of the preceding vehicle and following vehicle, relative distance and relative velocity of the vehicles using vehicle simulation models. The relative distance and the relative velocity are applied to the vehicle simulator controlled by a DC motor.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.92-94
• /
• 2005

Unmanned ground vehicles(UGVs) are expected to play a key role in the future army. These UGVs would be used for weapons platforms. logistics carriers, reconnaissance, surveillance, and target acquisition in the rough terrain. Most of path planning methodologies for UGVs offer an optimal or sub-optimal shortest-path in a 20 space. However, those methodologies do not consider increment and reduction effects of relative distance when a UGV climbs up or goes down in the slope of rough terrain. In this paper, we propose a novel path planning methodology using the modified distance transform algorithm. Our proposed path planning methodology employs two kinds of map. One is binary obstacle map. The other is the DEM. With these two maps, the modified distance transform algorithm in which distance between cells is increased or decreased by weighting function of slope is suggested. The proposed methodology is verified by various simulations on the randomly generated DEM and obstacle map.

• Journal of Distribution Science
• /
• v.13 no.8
• /
• pp.97-104
• /
• 2015

Purpose - This study examines the positive impact of the social distance between producers and users of online content, investigating and analyzing the most popular Web content. In addition, it tries to elicit the matching effect that appears when the individuals'cultural background is consistent with social distance. Research design, data, and methodology - We collected and analyzed actual data about 4,981 videos clips on YouTube, looking at six countries in order to verify the content of this study. Based on the results of the data analysis, the study conducted behavioral measurements on popularity, social distance, culture, and user engagement. The unit of analysis was the content and we collected information about the content producers and the content records. We controlled the views, comments, likes, calendar dates, and ages in the empirical models. The data was collected in 2011, with the records coming from South Korea, Japan, China, U.S., German, and France. A total of 4,980 elements were analyzed in the model. The empirical model estimated is the bivariate negative binomial distribution (NBD) model. Results - It turns out that there is a possibility that the matching effect can be diminished by variables that reflect the psychological involvement of user engagement. This study proposes academic and practical implications based on these research results. This research shows the positive effect of social distance between users and producers on the increased performance of the online content. We find the effect of social distance to be a stronger tendency in collectivism. The collectivists follow their sense of friendship and intimacy in their culture and, the social congruence effect can be found there as well. The effect, however, could erode in a social case where users are motivated by strong intrinsic and psychological factors. In addition, user engagement complicates the process of user decision making regarding the information. Conclusions - This study examines how the differential effects of social distance caused by culture could disappear through user commitment as a complicated user motivation. Some potential implications are as follows. First, a firm in the collectivism culture has to communicate based on the social distance. In fact, most online channels do not have a function that indicates the social distance as measured by favorites or subscribers. This function could help increase the performance of the content in online channels, but this increasing effect can only be found in a collectivist culture. Based on this, the firms have to communicate and announce to users the actual social distance between users and producers. Second, firms should develop a system that discovers the social distance and culture and shows these measures to users and producers, since the congruence effect between social distance and culture is found only for low user engagement. The firms can take the advantage of the congruence effect only for the development of the social distance and culture visualized system.