• Journal of Electrical Engineering and Technology
• /
• v.8 no.4
• /
• pp.824-831
• /
• 2013

Lightning electromagnetic fields are important issues for the evaluation of lightning induced overvoltage on power lines and for setting the appropriate protection level for power networks. Such electromagnetic fields are strongly dependent on lightning return stroke currents at different heights along the lightning channel. On the other hand, the ground reflection factor due to the difference between the return stroke channel impedance and the equivalent ground impedance at channel base can have an effect on the shape of the return stroke currents by entering additional reflected currents into the channel. In this paper, the effect of the ground reflection factor on the return stroke currents at different heights along a channel and the electromagnetic fields associated with the lightning channel at close distances are considered. Moreover, the behavior of the electromagnetic fields versus the reflection factor changes and the radial distance changes are considered and the results are discussed accordingly. The results illustrate that the reflection factor has a direct relationship with the values of the electromagnetic fields while this is usually ignored in earlier studies.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.3
• /
• pp.53-64
• /
• 2013

The car-following model is one of core models in Advanced Vehicle & Highway Systems (AVHS). The car-following model has been developed in aspects such as human factor and reduction error rates. However, the consideration of safety depending on weather condition has not been completed yet. In this paper, therefore, changes of driving condition for car-following due to different road condition were dealt with, and optimal safety distance corresponding to road condition such as dry, wet and snowy were computed. The GMIT(GM Model with Instantaneous T) model was picked over for simulation of adaptive cruise control applied the suggested optimal safety distance. As the results, the 1.7 times longer safety distance was required for wet road condition than dry road condition, and the 5.6 times longer safety distance was required for snowy road condition.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.5
• /
• pp.65-76
• /
• 2018

This study aims to evaluate the legibility distances of variable speed limit sign(VSL) for different sizes, luminances, and fog conditions through a field experiment. For this, extensive fog simulated environment has been constructed, and legibility distances are tested and recorded among test subjects for different luminances and sizes of VSL in control. Results showed that legibility distance increased as the size of VSL increased in the given illumination conditions, but it was not an exact linear trend. The size was also an important factor for determining legibility distance as the fog density increased, especially heavy fog conditions. In addition, the legibility distance also increased as the given illumination levels of VSL improved.

• Journal of Korean Society for Geospatial Information Science
• /
• v.15 no.3
• /
• pp.41-49
• /
• 2007

In this study, the software to compute Bessel coordinates by trilateration adjustment was developed, and the software was used to determine coordinates of the cadastral control points over the southern Korean peninsula. The baseline measured by GPS was reduced to the distance on geoid surface by applying PNU95 geoid model, and the distance on geoid surface was reduced to the plane grid distance by applying scale factor of map projection of Bessel coordinates. Using the plane grid distance, Bessel coordinates of 32 CORS (Continuously Operating Reference Station) were computed by free adjustment at first, and then the coordinates of the cadastral control points were computed by joining the control points to adjacent CORS. The result shows a possibility of construction of highly accurate and consistent cadastral survey network with coordinate error less than 1ppm of distance, when newly computing the coordinates of the control points by using distances measured by GPS.

• The KIPS Transactions:PartA
• /
• v.12A no.2 s.92
• /
• pp.181-190
• /
• 2005

The development of web-based distance education surroundings is steadily achieving. However the studying on the learning effect of learners is still weak against development of educational media itself. At present, most of the distance education system is showing limits in the evaluation of the learning effect because the teaming evaluation depends on mid or final-term exams by on-line or off-line. There is a strong point that the distance education is free from space and time. One of present weak points is limitation of evaluating learner's attitude which can estimate learning effects. Earnest teaming attitude at distance education is important factor for improving the learning effects. In this paper, we propose a model for improving the teaming effects by forcing real-time evaluation and returning feedback to learners at the cyber lectures. The developed experimental system is verified its possibilities.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.12 no.4
• /
• pp.95-112
• /
• 2009

The river cross section in the input/output data which are needed in the area of river flow analysis is very important factor. The bottom elevation of actual river cross section has to be correctly reflected to obtain correct results when two dimensional flow analysis is conducted for natural river. But to reflect virtually the bottom elevation of river cross section is impossible. The objective of this study is to suggest a method for creating equi-distance river cross section by using both HEC section and ArcView and constructing the finite element mesh. The main channels of Han and Nakdong river were selected and equi-distance river cross sections constructed in this study have shown good agreement with the observed river cross sections. In addition, high quality finite element meshes can be applied to many areas of study such as finite element analysis for water quality and two dimensional flow analysis using the suggested method for equi-distance river cross sections in this study.

• Nuclear Engineering and Technology
• /
• v.37 no.4
• /
• pp.375-384
• /
• 2005

To investigate the flow-accelerated corrosion (FAC) dependency of carbon steel (A106 Gr. B) and low-alloy steels (1Cr-1/2Mo, 21/4Cr-1Mo) on pH, orifice distance, and material, experiments were carried out. These experiments were performed using a flow velocity of 4 m/sec (partly 9 m/sec) at pH $8.0\~10.0$ in an oxygen-free aqueous solution re-circulated in an Erosion-Corrosion Test Loop at $130^{\circ}\;{\ldots}$ for 500 hours. The weight loss of the carbon steel specimens appeared to be positively dependent on the flow velocity. That of the carbon and low-alloy steel specimens also showed to be distinguishably dependent on the pH. At pH levels of $8.0\~9.5$ it decreased, but increased from 9.5 to 10.0. Utility water chemistry personnel should carefully consider this kind of pH dependency to control the water system pH to mitigate FAC of the piping system material. The weight loss of the specimens located further from the orifice in the distance range of $6.8\~27.2$ mm was shown to be greater, except for 21/4Cr-1Mo, which showed no orifice distance dependency. Low alloy steel specimens exhibited a factor of two times better resistance to FAC than that of the carbon steel. Based on this kind of FAC dependency of the carbon and low-alloy steels on the orifice distance and material, we conclude that it is necessary to alternate the composition of the secondary piping system material of NPPs, using low-alloy steels, such as 21/4Cr-1Mo, particularly when the system piping has to be replaced.

• International Area Studies Review
• /
• v.14 no.3
• /
• pp.109-130
• /
• 2010

The service sector comprises two thirds of world GDP in 2005 and takes 20% of the world trade. As the technologies such as telecommunication technologies advance, the long-distance trades in services is expected to increase. But there are few empirical research on the flows of services between regions. This paper studies the pattern of flows of long-distance trades in services across the regions. Since it is very hard to collect reliable data on long-distance trade in services, we collect data from regional input-output tables of Korea. The results shows that the hard service which can be consumed spatially separated from production tends to have more long-distance trade than the soft service which is consumed simultaneously with production. It also shows that regional gross domestic production is important factor for the pattern of trades in services.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.6
• /
• pp.707-714
• /
• 2021

An important factor that causes delays at roundabouts is unbalanced traffic conditions. The majority of domestic studies have tendedto focus on the proportion of entering traffic rather than conflicting traffic in order to explain unbalanced traffic conditions. Also, there is scant research on the proper distance between a signalized intersection and a roundabout. In this study, therefore, unbalanced traffic conditions and optimal distance between two intersections were analyzed using SIDRA software based on the Gajwa-ro roundabout in Icheon, where unbalanced traffic conditions occur during afternoon peak hours, and its position is 295 m from a signalized intersection. It was found that a state of unbalanced traffic conditions in the form of conflicting traffic caused delays at Gajwa-ro roundabout, and the queuing length on each approach was removed when there was 850 m of distance between two intersections.

• Journal of IKEEE
• /
• v.26 no.1
• /
• pp.89-94
• /
• 2022

The W-band (75-110GHz) is a band that can utilize at least 10 times more bandwidth than the existing 5G band. Therefore, it is one of the bands suitable for future mobile communication that requires high speed and low latency, such as virtual and augmented reality. However, since the wavelength is short, it has a high path loss and is very sensitive to the atmospheric environment. Therefore, in order to develop a W-band communication system in the future, it is necessary to analyze the characteristics of path loss according to the channel environment. In this paper, to analyze the characteristics of the W-band path loss, the random forest technique was used, and the influence of the channel parameters according to the distance section was analyzed through the path loss data according to various channel environment parameters. As a result of the simulation, the distance has the highest influence on the path loss in the short distance, and the other channel environment factor is almost ignored. However, as the distance section became longer, the influence of distance decreased while the impact of clutter and rainfall increased.