• 지역연구
• /
• 제12권2호
• /
• pp.59-68
• /
• 1996

Common belief in border regions holds that Mexican cross-border shoppers play a larger role in the regional economic base than they do and that NAFTA will provide a bigger stimulus to the regional economy than it is likely. In the regional economy than it is likely. In the first case, price elasticities are implicitly underestimated as highly inelastic and in the latter case, overestimated as highly elastic. This paper provides empirical evidence on the effects of distance and real exchange rates as price proxies on both field survey and population-imputed estimates of cross-border shopping. After estimating both distance-based and real exchange rate-based estimates of price elasticities of Mexican shopper demand for U.S. border-region goods, implications are obtained concerning the relative importance for U.S. border-regon economies of more distant Mexican markets, and the likely impacts of NAFTA.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.139-144
• /
• 2002

Ti-50.9at%Ni wires were welded using pulsed YAG laser. The laser welded wires were tested for investigating the shape memo교 effect and the ability of super elasticity. The fatigue properties of the welded wires were investigated using the rotary bending fatigue tester specially designed for wires. Moreover, the effect of defocusing distance during laser welding on the static and fatigue properties was investigated. The shape memory effect and super elasticity of the laser welded wires were approximately identical with that of base metal at the test temperature below 353K. However, the welded wires were broken within elastic limit at the test temperature above 353k. Under the cyclic bending loading conditions, the welded wires could be useful only below the elastic limit, while the base metal had sufficient fatigue life even the stress induced M-phase region. The fatigue strength of the welded wires was about half of that of the base metal. The deterioration of the static and fatigue properties in the welded wires was proven to be from the large difference of the transformation behavior between the base metal and welded part that is caused by vaporization of Ni-content at the welded part during the welding process. The defocusing distance below 3mm acted more largely on lowering the strength of the welded wires than that of 6mm or 8mm.

• 대한교통학회지
• /
• 제29권4호
• /
• pp.85-93
• /
• 2011

교통부문의 지속가능성(sustainability)을 유지하기 위하여 대중교통중심의 도시개발(transit oriented development, TOD), 자전거나 보행 등 녹색 교통수단의 이용활성화, 그리고 차량운행시 배출되는 온실가스(green house gas) 를 감축하는 정책 등 다양한 방안들이 제시되고 있다. 이중 온실가스 배출량에 대한 다양한 연구들이 제시되고 있으나, 교통측면의 행태적인 분석에는 한계를 가지고 있다. 본 연구는 교통측면에서 좀 더 행태적인 측면을 고려한 온실가스 배출량 추정식을 제시하는 것이 연구의 목적이다. 즉, 특정 존에서 발생하는 차량으로 인한 온실가스 배출량을 기종점간 통행수요(travel demand for each OD pair)와 통행거리(travel distance)를 반영하여 결정한다. 여기서 기종점간 통행수요는 통행비용의 함수로 중력모형(gravity model)을 이용하여 구해지며, 통행거리는 평균 통행거리가 아닌 기종점간 실제 통행거리를 고려한다는 점이 기존 연구와 차이가 된다. 또한, 본 연구에서 제시하는 온실가스 추정식의 적용성과 활용성을 검토하기 위하여 통행비용에 대한 온실가스 배출량의 민감도(sensitivity)와 탄력성(elasticity)을 유도하며, 정책적 측면에서 온실가스를 감축하기 위한 온실가스 통행료(green house gas pricing)의 부과 효과에 대해서도 검토해 본다.

• 대한교통학회지
• /
• 제7권2호
• /
• pp.17-27
• /
• 1989

A nonlinear programming model for evaluating public transit fare system is proposed. The model finds transit fare level and the structure that maximizes gross fare-box revenue subject to constraints on minimum ridership and the form of the fare equations. It is assumed that the demand for transit is a function of fare and its own-fare elasticity. It is assumed that the demand for transit is a function of fare and its own-fare elasticity. It is also assumed that the conditions including fare of the other modes are unchanged ; i.e., partial equilibrium. Empirical study has been performed for the case of Seoul subway system. This study includes an analysis of fare structure ; flat system and distance-based fare system. Sensitivity and comperative static analysis for elasticity has been also demonstrated.

• 아태비즈니스연구
• /
• 제7권2호
• /
• pp.61-76
• /
• 2016

This study aims to establish ways of how languages are used as determination factors for investment decisions among Asian countries where used languages are diversified. According to the analysis result, language segmentation of the investing country increases investment whereas the language segmentation of the invested countries is analyzed as the decreasing factor of investment. Also, it is analyzed that the further the linguistic distance between the investing country and the invested country the more investment increases. In the aspects of approached language distance and investment time selection, along with the increased linguistic distance, the elasticity to foreign direct investment is apprehended to be more flexible than other forms of investment. Such result shows the more segmented the languages of the targeted invested country the more investment cost will increase and therefore the results in linguistic distance can be explained as diversification of the invested country and the result to the forming of bridgehead at the invested area.

• 한국환경과학회지
• /
• 제20권1호
• /
• pp.25-34
• /
• 2011

The new empirical static model was constructed on the basis of dimension analysis to predict the pressure drop according to the operating conditions. The empirical static model consists of the initial pressure drop term (${\Delta}P_{initial}$) and the dust mass number term($N_{dust}=\frac{{\omega}_0{\nu}_f}{P_{pulse}t}$), and two parameters (dust deposit resistance and exponent of dust mass number) have been estimated from experimental data. The optimum injection distance was identified in the 64 experimental data at the fixed filtration velocity and pulse pressure. The dust deposit resistance ($K_d$), one of the empirical static model parameters got the minimum value at d=0.11m, at which the total pressure drop was minimized. The exponent of dust mass number was interpreted as the elasticity of pressure drop to the dust mass number. The elasticity of the unimodal behavior had also a maximum value at d=0.11m, at which the pressure drop increased most rapidly with the dust mass number. Additionally, the correlation coefficient for the new empirical static model was 0.914.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.998-1004
• /
• 2005

U.J.S.(Ultra Jetting System) is a new ground improvement method registered as a Utility Model No.0205798, which has fundamentally improved the existing jetting method of J.S.P.(Jumbo Special Pattern System). In this study, the uniaxial compressive strengths of improved soil-grout structures by U.J.S. and J.S.P. which have been conducted on the construction site are compared. Also, the differences between the U.J.S. and J.S.P. are analyzed by considering the role of the auger bit, the injection distance measured from the axis of boring tubes, and angle of injection measured from the horizontal. The specimens of soil-grout structures are taken from the improved soils by using the U.J.S. and J.S.P. The uniaxial tests for the samples are conducted after the curing period of 28 days. The uniaxial compressive strengths and the coefficients of elasticity of surface and distance from the axis of boring. This study shows that the mean strength of the improved structure by J.S.P. is 1.9 times greater than by J.S.P.

• Structural Engineering and Mechanics
• /
• 제25권4호
• /
• pp.383-403
• /
• 2007

The contact problem for an elastic layer resting on an elastic half plane is considered according to the theory of elasticity with integral transformation technique. External loads P and Q are transmitted to the layer by means of two dissimilar rigid flat punches. Widths of punches are different and the thickness of the layer is h. All surfaces are frictionless and it is assumed that the layer is subjected to uniform vertical body force due to effect of gravity. The contact along the interface between elastic layer and half plane will be continuous, if the value of load factor, ${\lambda}$, is less than a critical value, ${\lambda}_{cr}$. However, if tensile tractions are not allowed on the interface, for ${\lambda}$ > ${\lambda}_{cr}$ the layer separates from the interface along a certain finite region. First the continuous contact problem is reduced to singular integral equations and solved numerically using appropriate Gauss-Chebyshev integration formulas. Initial separation loads, ${\lambda}_{cr}$, initial separation points, $x_{cr}$, are determined. Also the required distance between the punches to avoid any separation between the punches and the layer is studied and the limit distance between punches that ends interaction of punches, is investigated. Then discontinuous contact problem is formulated in terms of singular integral equations. The numerical results for initial and end points of the separation region, displacements of the region and the contact stress distribution along the interface between elastic layer and half plane is determined for various dimensionless quantities.

• International Journal of Korean Welding Society
• /
• 제3권1호
• /
• pp.39-44
• /
• 2003

The welded specimens were made by butt welding of the 2 wires of 50mm length using the pulsed YAG laser. The laser welded wires were tested for investigating the shape memory effect and the ability of super elasticity. The fatigue properties of the welded wires were investigated using the rotary bending fatigue tester specially designed for wires. Moreover, the effect of defocusing distance during laser welding on the static and fatigue properties was Investigated. The shape memory effect and super elasticity of the laser welded wires were approximately identical with that of base metal at the test temperature below 353K. However, the welded wires were broken within elastic limit at the test temperature above 353k. Under the cyclic bending loading conditions, the welded wires could be useful only below the elastic limit, while the base metal had sufficient fatigue life even the stress induced M-phase region. The fatigue strength of the welded wires was about half of that of the base metal. The deterioration of the static and fatigue properties in the welded wires was proven to be from the large difference of the transformation behavior between the base metal and welded part that is caused by vaporization of Ni-content at the welded part during the welding process. The defocusing distance below 3mm acted more largely on lowering the strength of the welded wires than that of 6mm or 8mm.

• 제어로봇시스템학회논문지
• /
• 제5권1호
• /
• pp.105-114
• /
• 1999

By using the conceptual impedance and the elasticity of a serial chain of spring-damper system, a real-time collision-free trajectory generation algorithm is proposed. The reference points on a trajectory connected by the spring-damper system have a mechanism for self-Position adjustment to avoid a collision by the impedance, and the local adjustment of each reference point is propagated through the elasticity to a real robot at the end of the spring-damper system. As a result, the overall trajectory consisting of the reference points becomes free of collision with environmental obstacles and efficient having the shortest distance as possible. In this process, the reference points connected by the spring-damper system take role of virtual robot as global guidance for a real robot, and a cooperative optimization is carried out by the system of virtual robots. A control algorithm is proposed to implement the impedance for a car-like mobile robot.