• 자원환경지질
• /
• 제12권1호
• /
• pp.1-12
• /
• 1979

A model study was conducted for the interpretation of simple geologic structures. Experiments were carried out for the cases of two horizontal beds and dipping beds in a water tank by using Wenner and Schlumberger arrays respectively. As a geologic stratum of experimental model, cement be (cement: sand=1:2) of $70cm{\times}60cm{\times}10cm$ was used. It was found out from a preliminary experiment that a measuring sounding of Wenner arrays is one third of the distance between two current electrodes, and Schlumberger arrays is one fourth of the distance which is a half of the value determined by usual method of calculation. Equi-resistivity curves were obtained for the cases of horizontal beds and dipping beds, and mapped on the longitudinal and cross sections of the water tank. These curves delineate the shape and degree of dip of bed to some extent. The calculation of depth to beds by using a master curve is somewhat complicated and inexact. In this study, new method for this calculation using a ${\rho}_a/{\rho}_1-a$ graph was proposed, and turned out that this method is simpler and exact.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 A
• /
• pp.440-442
• /
• 2000

This paper describes the digital distance algorithm in case of combined transmission line connected with overhead line and underground cable. Actually as fault is occurred in cable, it results in the complicated phenomena due to the several kind of grounding method in the sheath of cable. Accordingly the impedance. Therefore the correct impedance calculation algorithm is requested in combined transmission line to avoid the wrong trip of relay. This paper presents the development result of impedance calculation algorithm In such transmission line.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
• /
• pp.222-224
• /
• 2005

In the development of Antiskid Brake System(ABS) for a fixed-wing aircraft, the braking efficiency is the most essential parameters to evaluate the ABS, especially in slippery road conditions. The braking distance and landing distance of the aircraft depends on it. Since the ABS has been designed and implemented as a subsystem of the aircrafts, the braking performance was evaluated under dynamometer test, where the dynamometer emulates the aircraft mass. Under simulated wet road conditions, the dynamometer starts to be braked. This paper suggests practical braking efficiency calculation methods and the results and finally compares each method.

• 한국생산제조학회지
• /
• 제18권4호
• /
• pp.417-422
• /
• 2009

The injection mold cooling circuit optimization was studied with a response surface method in the previous research. It took so much time to find an optimum solution for a large product due to an extensive amount of calculation time for the CAE analysis. In order to use the optimization technique in the actual design process, the calculation time should be much reduced. In this study, we tried to reduce the number of design variables with the concept of the close relationship between the depth and the distance of cooling channel. The optimum ratio of the distance to the depth of cooling channels for a 2-dimensional problem was 2.0 so that the optimum ratio was again sought out for 4 large automotive parts. Therefore, the number of design variables for the cooling circuit optimization can be reduced in half, resulting in much faster running time for the optimization as a design tool.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.133-134
• /
• 2006

In this paper, a novel method is presented for efficient calculation of the spatial-domain Green's functions of 2D electromagnetic problems. This method combines spectral and spatial domain calculation schemes and prevents the Green's functions from diverging at the singularities that complicate the process of the Method of Moment(MoM) application. For the validation of this proposed method, fields will be evaluated along the spatial distance including zero distance for 2D free-space and periodic homogeneous geometry. The numerical results show the validity of the prosed method and correspondng physics.

• 한국산학기술학회논문지
• /
• 제16권10호
• /
• pp.6949-6958
• /
• 2015

무선통신기반 열차제어시스템은 관할영역 내에 운행 중인 열차의 위치정보를 지상시스템에서 실시간으로 수신하고 다시 각각의 열차의 차상시스템에 새로운 이동권한을 제공함으로써 안전한 간격제어를 수행한다. 열차제어시스템의 성능은 최소 운전시격으로 평가되며 그것은 열차제어시스템의 간격제어 성능뿐만 아니라 운영특성 그리고 열차의 특성을 반영하여 계산된다. 본 논문은 무선통신기반 열차제어시스템의 운전시격 계산과 운전시격을 개선하기 위한 새로운 열차간격제어 알고리즘을 제안한다. 제안된 운전시격 계산 방법은 열차제어시스템 간격제어 성능을 반영한 안전마진 추정을 통해 각각 역간 운전시격과 역 운전시격을 정의한다. 또한 제안된 열차간격제어 개선 알고리즘은 간격제어 개선을 위해 거리와 속도를 포함하는 이동권한을 새롭게 정의하며 선행열차에서 필연적으로 발생하는 제동거리를 이용함으로써 열차의 운전시격을 향상시킬 수 있다. 제안된 운전시격 계산방법을 한국형 무선통신기반 열차제어시스템의 간격제어 성능을 대상으로 시뮬레이션을 수행하며 개선된 열차간격제어 알고리즘과 비교분석 한다. 시뮬레이션 결과에 따르면 제안된 운전시격 계산방법은 향후 무선통신기반 열차제어시스템의 성능 지표로 활용이 가능하며 제안된 간격제어 알고리즘은 기존의 무선통신기반 열차제어시스템의 역 운전시격과 역간 운전시격을 개선할 수 있음을 확인한다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 춘계학술대회 논문집
• /
• pp.361-364
• /
• 2009

The cooling system optimization for injection molds was studied with a response surface method in the previous research. It took so much time to find an optimum solution for a large product due to an extensive amount of calculation time for the CAE analysis. In order to use the optimization technique in the actual design process, the calculation time should be much reduced. In this study, we tried to reduce the number of design variables with the concept of the close relationship between the depth and the distance of cooling channels. The optimum ratio of the distance to the depth of cooling channels for a 2-dimensional problem was 2.0 so that the optimum ratio was again sought out for 4 industrial products. The major cooling effect of the injection molds for large products rely on baffle tubes. The optimum ratio of the distance to the depth for baffle tubes was 2.0 for the large products. The result enables us to reduce the number of the design variables by half in the cooling system optimization problem.

• 전자공학회논문지
• /
• 제52권4호
• /
• pp.23-29
• /
• 2015

본 논문에서는 수중 위치 추적(Underwater Localization)을 위한 수평거리 추정 방식 중 음선의 각도 변화를 이용하는 방식을 개선하는 Look-up Table(LUT)를 사용하는 방식을 제안하고 기존 방식과의 연산속도 및 수평거리 오차를 비교한다. LUT를 사용하여 추정하는 방식은 수신기의 음파 도달 시간(Time of arrival : ToA)과 깊이에 따른 Sound Speed Profile(SSP)을 이용하여 만들어진 수평 거리-ToA table을 이용한다. 결과적으로, 음선의 각도 변화를 이용하는 방식에 비해 수평거리 추정오차는 다소 증가하게 되지만, 수신된 ToA에 대응되는 수평거리를 사용한다는 점에서 실시간으로 각도 변화를 추정하는 기존방식에 비하여 매우 빠른 처리가 가능하다.

• 대한안전경영과학회지
• /
• 제25권1호
• /
• pp.31-38
• /
• 2023

The object of this study is to evaluate whether the means of egress of Jechon Sports Center and Miryang Sejong Hospital, where massive fire human casualties occurred in 2017 and 2018 respectively, comply with NFPA 101(Life Safety Code), and to suggest the need for supplementation of domestic means of egress regulations. The study evaluated the number and arrangement of the means of egress, travel distance, common path of travel, dead end and discharge from exit for each building by applying the means of egress regulations of NFPA 101. As a result of the evaluation through NFPA 101, the travel distance was appropriate, but some of the other items except for the travel distance did not meet NFPA 101. The regulations that need to be supplemented are 1)occupant load calculation 2)egress capacity calculation 3)continuous concept of means of egress 4)concept of common path of travel. It is especially necessary to revise the requirement for fire door of the evacuation floor(normal 1^st floor) of the stairwell in case of below the five story building.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2007년도 춘계학술대회 논문집
• /
• pp.231-234
• /
• 2007

A measurement technique in an industry site is basis technique which is bringing a ripple effect on an increasing productivity. Recently, a measurement request is increasing in the industry field as well as the variety field such as leisure, research. Thus, it is in point of time to secure an internal technique about measurement using a laser. In this paper, we prepare to develop the industrial precision laser distance measure device that is available measuring in several hundred meters[m]. In other words, we are planning to measure a wide distance using a laser diode that has long life and is compact, inexpensive. Through this research, we'll secure the pulse laser control technique, a signal processing, technique for distance calculation about a laser distance measurement system. And hereafter, we'll plan to commercialize a laser distance device using this research.