• 한국산림과학회지
• /
• 제60권1호
• /
• pp.45-50
• /
• 1983

1970년(年) 이래(以來) 원자재(原資材)의 감소(減少)와 목재(木材)의 수요(需要)가 증가(增加)함에 따라 원료재(原料材)의 효율적(效率的) 이용(利用)이 국내외적(國內外的)으로 요청(要請)되고 있다. 따라서 본고(本稿)에서는 전수체(全樹體)를 이용(利用)한다는 면(面)에서 졸참나무(Quercus serrata Thunb.) 지재(枝材)에 관(關)한 특성(特性) 연구(硏究)의 한 방안(方案)으로 주요구성요소(主要構成要素)인 fiber의 dimension에 관한 것을 다루었으며, 수체내(樹體內)에서 지재개체(枝材個體), 부분(部分) 및 위치(位置)에 따라서 섬유장(纖維長), 폭(幅) 그리고 막후(膜厚)를 측정(測定)하고 분석(分析)하였다. 본(本) 연구(硏究)에서 얻은 결과(結果)는 다음과 같다. 1) 지재개체(枝材個體)의 높이가 지상(地上)에서 수고방향(樹高方向)으로 증가(增加)함에 따라 섬유장(纖維長), 폭(幅) 그리고 막후(膜厚)는 직선적(直線的)으로 감소(減少)함을 나타냈으며 이들의 회귀식(回歸式)은 각기 Y=770.03-22.643X, Y=27.444-0.71385X 및 Y=12.308-0.57320X였다. 2) 지재내(枝材內)에서 수간(樹幹)에 인접한 부위(部位)로부터 가지의 끝으로 이행(移行)하여 감에 따라 섬유장(纖維長), 폭(幅) 그리고 막후(膜厚)는 일차적(一次的)인 직선관계(直線關係)로 감소(減少)함을 보였으며 이들의 회귀식(回歸式)은 각각(各各) Y=752.70-0.6724X, Y=26.152-0.0084867X 및 Y=11.258-0.006205X 였다. 3) 연령(年齡)에 따라, 즉 수(髓)로부터 수피방향(樹皮方向)으로, 섬유장(纖維長), 폭(幅) 그리고 막후(膜厚)의 변이(變異)는 점차로 증가(增加)함이 직선(直線)으로 나타났으며 그 회귀식(回歸式)은 각각 Y=679.73+11.231X, Y=25.382+0.0925X 및 Y=10.521+0.11787X 였다. 4) 각(各) 기재개체간(技材個體間)의 섬유장(纖維長), 폭(幅) 그리고 막후(膜厚)는 각각 $625{\sim}765{\mu}m$, $26{\mu}m$ 및 $11{\mu}m$ 에서 가장 많은 분포량(分布量)을 나타냈다.

• 한국어류학회지
• /
• 제17권1호
• /
• pp.36-42
• /
• 2005

한국의 메기과 (Siluridae) 어류의 수염을 조직학적으로 조사하였다. 메기, Silurus asotus의 상악 수염은 연골성 중축을 감싸는 진피와 표피로 구성 되었다. 표피층에는 점액세포, 과립형세포 및 미뢰가 있었다. 세포질이 약한 호염기성을 보이는 점액세포와 호염기성을 보이는 미뢰는 각각 표피의 표면과 표피 말단 부위에 위치 하였다. 표피와 진피는 기저막으로 구분되며 진피는 소성결합조직으로 구성 되었으며 신경세포와 혈관이 내재하고 있었다. 수염의 가장 내부에 연골성 중축이 존재 하였으며 근육층으로 둘러싸여 있었다. 미유기, S.microdorsalis의 상악 수염 구조는 메기의 상악 수염 구조와 비교시 별다른 차이는 보이지 않았으나, 상악 상부와 하부에서의 표피 % 두께 및 상악 상부와 중부에서의 미뢰 수에 있어 미유기는 메기에 비해 차이를 보였다. 본 연구결과 메기와 미유기의 상악 수염은 딱딱하고 굴절성형(stiff and flexible type)으로 파악 되었다.

• Archives of Plastic Surgery
• /
• 제33권6호
• /
• pp.715-722
• /
• 2006

Purpose: The main advantages of the perforator flap are minimal donor site morbidity, preservation of any main source artery and its thin characteristics. Most perforator flaps for hand reconstruction need primary and secondary procedures such as a flap debulkiness and liposuction etc. However, flap thickness of calf area is thinner than any other perforator flaps. Methods: We performed an anatomical study and clinical application of medial sural artery perforator flap. We found that there are two or more medial sural perforators located on a straight line drawn from the mid-point of popliteal crease to the mid-point of medial malleolus. Most pathway of medial sural artery comes along with this line. It is possible to observe the first perforators almost exactly 8 cm from midpoint of popliteal crease in a distal half circle drawn with a radius of 2 cm. Results: We report 12 cases in 11 patients of hand reconstruction with medial sural perforator free flap from Febrary 2003 to Febrary 2006. Complete healing was possible in 11 cases. Total flap loss for venous insufficiency was in 1 patient. During the follow-up, good contour and full range of motion was observed on hand reconstruction with medial sural perforator free flap. Conclusion: In the authors' experience, this anatomical study made it possible to prepare a diagram of the exact location of the medial sural perforators. This flap can be used to achieve acceptable functional and aesthetic results for hand reconstruction because of its thin characteristics.

• Archives of Plastic Surgery
• /
• 제33권5호
• /
• pp.637-642
• /
• 2006

Purpose: Incidence of chronic osteomyelitis in femur is lower than that of tibia due to abundantsurrounding soft tissue like muscles and subcutaneous fat. However, if the femur is infected, surgical approach would be very difficult because of surrounding soft tissue and bony defects would be getting larger due to the late detection. Chronic osteomyelitis of femur is an intractable disease with frequent recurrence and remained bone instability in spite of multiple classical operations. Methods: From August 1998 to October 2005, we had 7 cases of fibular osteocutaneous free flap to reconstruct the femur. Those were followed-up for 23 months. All 7 cases were male. 4 cases were in midshaft and the others are distal part of femur. Results: The 7 cases that had not been healed in spite of average 9.1 times previous operations were reconstructed successfully without the recurrence of chronic osteomyelitis. Continuous rehabilitation therapy and brace were very helpful for the ambulation. It took 5.6 months for complete union of bone, and 9.8 months for the ambulation. Conclusion: After wide resection, reconstruction of the femur using fibular osteocutaneous free flap guaranteed bone stability and prevented recurrence of osteomyelitis through rich blood supplying fibula and muscle. Double barrel graft of fibula would be needed in case of the sufficient strength and thickness of femur. We report the successful results of reconstruction of femur with fibular osteocutaneous free flap for chronic osteomyelitis of femur.

• Asian-Australasian Journal of Animal Sciences
• /
• 제25권1호
• /
• pp.17-21
• /
• 2012

The purpose of this study was to improve mapping power and resolution for the QTL influencing carcass quality in Hanwoo, which was previously detected on the bovine chromosome (BTA) 6. A sample of 427 steers were chosen, which were the progeny from 45 Korean proven sires in the Hanwoo Improvement Center, Seosan, Korea. The samples were genotyped with the set of 2,535 SNPs on BTA6 that were imbedded in the Illumina bovine 50 k chip. A linkage disequilibrium variance component mapping (LDVCM) method, which exploited both linkage between sires and their steers and population-wide linkage disequilibrium, was applied to detect QTL for four carcass quality traits. Fifteen QTL were detected at 0.1% comparison-wise level, for which five, three, five, and two QTL were associated with carcass weight (CWT), backfat thickness (BFT), longissimus dorsi muscle area (LMA), and marbling score (Marb), respectively. The number of QTL was greater compared with our previous results, in which twelve QTL for carcass quality were detected on the BTA6 in the same population by applying other linkage disequilibrium mapping approaches. One QTL for LMA was detected on the distal region (110,285,672 to 110,633,096 bp) with the most significant evidence for linkage (p< $10^{-5}$). Another QTL that was detected on the proximal region (33,596,515 to 33,897,434 bp) was pleiotrophic, i.e. influencing CWT, BFT, and LMA. Our results suggest that the LDVCM is a good alternative method for QTL fine-mapping in detection and characterization of QTL.

• 디지털융복합연구
• /
• 제15권10호
• /
• pp.307-314
• /
• 2017

본 연구에서는 하악전방이동 코골이 장치의 종류에 따라 최소한의 수직 교합량을 각각 다르게 확보하여 1급 교합을 가진 대상이 각 장치를 착용한 뒤, 수직 교합량이 하악의 위치, 근육의 변화, 혀의 위치등을 부가적으로 변화시켜 상기도의 면적에 영향을 주는 지 알아보고자 하였다. 수직량이 높을수록 상기도의 면적은 감소했으며, 혀의 위치를 후방으로 처지지 않게 할수록 상기도의 면적이 증가함을 알 수 있다. 코골이 감소를 위해 의사들은 환자들의 교합관계를 정확하게 진단하여 그 교합에 맞는 하악전방이동 코골이 장치를 선택해야 하고, 선택된 장치를 제작하는 치과 기공사 또한 장치의 효과를 높이기 위해 수직 교합량, 후방연 설정과 장치의 두께 등 디자인 설정을 고려해야 한다.

• 대한치과기공학회지
• /
• 제42권2호
• /
• pp.81-89
• /
• 2020

Purpose: This in vitro study was conducted to evaluate the marginal and internal fit of three-unit Co-Cr frameworks fabricated by computer-aided metal milling and direct metal laser sintering(DMLS) systems in comparison to conventional casting method. Methods: Three-unit Co-Cr frameworks were fabricated by conventional wax up with casting(CWC), computer-aided metal milling(MM) and direct metal laser sintering(DMLS)(n=10 each). The marginal and internal fit of specimens were examined using a light-body silicone impression material. The thickness of light-body silicone was measured at eight reference points each, divided in the mesio distal and bucco lingual directions. All measurements were conducted by a stereomicroscope. Digital photos were taken at 150× magnification and then analyzed using a measurement software. The Kruskal-Wallis test and Bonferroni correction were used for analyzing the results. Results: The mean(SD) is ㎛ for fabrication methods, the mean marginal fit were recorded respectively, DMLS 39(27), followed by CWC 63(38), MM 220(128). and the mean internal fit CWC 95(47), DMLS 116(49), MM 210(152). In addition, the largest gap was found in the occlusal surface area among the internal measurement areas of all groups. Conclusion: As a result, the direct metal laser sintering method showed better marginal and internal fit than the metal milling method. The marginal and internal fit were statistically different according to the three fabrication methods(p<0.001). Except the MM group, the marginal fit of the CWC and DMLS groups was below the clinical standard of 120 ㎛. Based on the results of this study, it can be applied to clinical use in the future.

• 대한핵의학회지
• /
• 제38권5호
• /
• pp.344-346
• /
• 2004

A 69-year-old woman was presented with progressed dysphagia, gastric soreness and weight loss during 2 months. She was performed abdomen x-ray, EGDS and abdomen CT. Abdomen x-ray demonstrated punctuate calcification on LUQ. EGDS showed an ulceroinfiltrative mass with bleeding on cardia to antrum of stomach. And CT showed diffuse gastric wall thickness with multiple calcifications. Biopsy of the stomach and esophagus during EGDS examination revealed an adenocarcinoma, with signet ring cell type, infiltrating the wall of the stomach and the distal esophagus. Then acne scan was performed a few days later. It revealed intense uptake in LUQ, corresponding to the calcium containing neoplasm seen on the abdomen x-ray, EGDS and abdomen CT. And there was no evidence of any metastatic lesion and thyroid uptake on the bone scan. There are many reports about accumulation of the tracer in extraosseous lesion, but only a few literatures were reported about gastric calcification in stomach cancer. More over, no reports showed CT images. We are performed many diagnostic examinations and found well correlation between them. The reason of gastric calcification is considered with calcium deposition within extracellular space due to hemorrhage or necrosis. Other possibility offered to explain gastric calcification have been increased blood flow and/or increased neovascularity with capillary leaks of tracer, and specific enzymatic (phosphatases) receptor binding of tracer. So, it was happened ion exchange between intracellular calcium and phosphate groups of tracer.

• 대한치과기공학회지
• /
• 제39권4호
• /
• pp.235-242
• /
• 2017

Purpose: The aim of this study was to evaluate the marginal and internal gap of zirconia copings fabricated by CAD/CAM system and to research the effect of cement space on the fit of zirconia prosthesis. Methods: Zirconia copings were designed using 3shape software and then milled from presintered zirconia blocks by Kavo dental milling machine. The cement space was set at $0{\mu}m$ around the margins for all groups, and additional cement space appling 1 mm above the finish lines of tooth. The samples were classified into 4 groups according to the cement space setting(Cs-0, Cs-40, Cs-80, Cs-120). Replica technique used to investigate marginal and internal gap. The silicone film thickness was recorded using a optical microscope with image software analysis system at 75${\times}$magnification. The assessment performed on the six points in bucco-lingual and mesio-distal sections(4 groups, 10 copings per group, 12 measuring points per coping). The data were statistically analyzed with one-way ANOVA followed by pair-wise Tukey's post hoc tests(${\alpha}$<0.05). Results: Better marginal and internal fit values were exhibited by $80{\mu}m$ cement space. The results showed that different cement space values had statistically significant effect on the marginal and internal gap of zirconia copings(p<0.001). The gap of margin and axial wall area was smaller than that the gap of occlusal area in all groups(p<0.001). Conclusion : Effect of different cement spaces on the marginal and internal gap of zirconia copings.

• Journal of Periodontal and Implant Science
• /
• 제27권2호
• /
• pp.347-361
• /
• 1997

The present study investigates the effects of DFDB graft combined with Calcium sulfate membrane on the periodontal wound healing in dehiscence defects of dogs. Following the initiation of general anesthesia by I.V. administration of 30mg/kg of pentobarbital, first premolar was extracted and full-thickness flap was elevated from the second to the fourth premolar. The portion of premolars coronal to the alveolar crest was removed and mesial and distal roots separated to produce single rooted teeth. Exposed root canals were sealed with Caviton and covered completely with flaps sutured. Following the healing period of 12 weeks, the surgical sites were uncovered and $4{\times}4mm$ dehiscence defects were surgically created. Those defects with DFDB graft combined with Calcium sulfate membrane following root planing, were designated as test sites and those with flap surgery-only were designated as controls. 1. No foreign-body reaction or inflammation were observed in either groups. Calcium sulfate was completely resorbed in the test sites. 2. Significantly greater amounts of new cementum was observed in test sites compared with the controls. Significant amounts of functionally orientated collagens were observed in the test sites. 3. New bone formation was observed in significantly greater amounts in test sites. The results suggest that combined graft of DFDB and calcium sulfate is extremely biocompatible with a potential for new bone and cementum formation, and functional alignment of periodontal ligaments.