• Journal of Aquaculture
• /
• v.13 no.1
• /
• pp.39-46
• /
• 2000

Successive management of prawn farm is strongly dependent upon monitoring of pond seawater quality which is generally influenced by an excessive food supplied sediment type and phytoplankton composition in the pond. For good condition of seawater quality it must need exchangning of fresh seawater by tidal current. Two distinct shrimp ponds Galha and Yunho which were different in seawater exchanging system and sediment type were selected to understand how some factors affected to seawater and sediment qualities in the pond. Prawn growth was also determined. Galha pond characterized by sand bottom with water exchanging by turn of the tidal current accumulated 1.8 mgS/g-dry as sulfide in sediment while Yunho pond mud- bottomed with seawater exchanging of pumping system showed 4.7mgS/g-dry when it was highest, Ammonia-N and hydrogen sulfide measured in the seawater were 0.31mg/${\ell}$ and 21.2 ${\mu}$${\ell}$/${\ell}$in Yunho and 0.10mg/${\ell}$and 10.8${\mu}$${\ell}$/${\ell}$in Galha pond respectively. Dissolved oxygen remained below 6.0mg/${\ell}$ in Galha and 5.0mg/${\ell}$in Yunho pond from June through August. Less growth of prawn was found in Yunho pond than in Galha pond. Prawn growth expressed as body length and weight were 138.3mm 22.9g in Yunho pond while they were length 158.2mm and 28.9g in Galha pond respectively when they were harvested in October. These results indicate that higher levels of ammonia-N and hydrogen sulfide and lower dissolved oxygen in bottom seawater of Yunho pond might affect the growth of cultured prawn.

• Environmental Engineering Research
• /
• v.10 no.3
• /
• pp.138-143
• /
• 2005

Laboratory batch experiments were conducted to evaluate the Fenton degradation rates of phenanthrene. Fenton reactions for the degradation of phenanthrene were carried out with aqueous and slurry phase, to investigate the effects of sorption of phenanthrene onto solid phase. Various types of surfactants and electrolyte solutions were used to evaluate the effects on the phenanthrene degradation rates by Fenton's reaction. A maximum 90% removal of phenanthrene was achieved in aqueous phase with 0.9% of $H_2O_2$ and 300 mg/L of $Fe^{2+}$ at pH 3. In aqueous phase reaction, inhibitory effects of synthetic surfactants on the removal of phenanthrene were observed, implying that surfactant molecules acted as strong scavenger of hydroxyl radicals. However, use of $carboxymethyl-{\beta}-cyclodextrin$ (CMCD), natural surfactant, showed a slight enhancement in the degradation of phenanthrene. It was considered that reactive radicals formed at ternary complex were located in close proximity to phenanthrene partitioned into CMCD cavities. It was also show that Fenton degradation of phenanthrene were greatly enhanced by addition of NaCl, indicating that potent radical ion ($OCI^-$) played an important role in the phenanthrene degradation, although chloride ion might be acted as scavenger of radicals at low concentrations. Phenanthrene in slurry phase was resistant to Fenton degradation. It might be due to the fact that free radicals were mostly reacting with dissolved species rather than with sorbed phenanthrene. Even though synthetic surfactants were added to increase the phenanthrene concentration in dissolved phase, low degradation efficiency was obtained because of the scavenging of radicals by surfactants molecules. However, use of CMCD in slurry phase, showed a slight enhancement in the phenanthrene degradation. As an alternative, use of Fenton reaction with CMCD could be considered to increase the degradation rates of phenanthrene desorbed from solid phase.

• Journal of Aquaculture
• /
• v.10 no.4
• /
• pp.457-462
• /
• 1997

During the period of the Cochlodinium polykrikoides red tide occurrence in the southern coast of Korea in 1997, we obseved the vertical migration of red tide organisms in situ, along with environmental factors such as water temperature, dissolved oxygen, pH, chlorophyll $\alpha$ and nutrients for practical application of loess suspension techniques ot diminish fisheries damage. To cope with serious outbreaks of red tide of C. polykrikoides, the finfish culturists resorted with loess suspension to disperse the bloom watermass by turning around it with fishing boats in full speed. Peak in afternoon the cell numbers were diminished in the surface layer after sunset red tide organisms settled down in the middle and bottom layer progressively again after sunrise. Chlorophyll $\alpha$ and dissolved oxygen showed the same trends of variation with the cell number. In the course of controlling the red tide with loess suspension we could not find any severs oxygen deficiency to kill the culture species.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.10a
• /
• pp.186-187
• /
• 2008

Electrical resistivity in hydrate-bearing sediments is sensitive to porosity, gas hydrate saturation, gas content, pore fluid composition, and temperature, so electrical measurements such as well logs and electromagnetic surveys have been used to explore gas hydrate-bearing formation. The high pressure tomography cell is designed considering the effect of electrode configuration and electrical shielding on tomography measurements and the safety. The evolution of electrical conductivity during $CO_2$ hydrate formation and dissociation reflects the combined effects of concurrent changes that include ionization of dissolved $CO_2$, temperature-dependent ionic mobility, changes in the degree of saturation, ion exclusion, surface conduction, and porosity changes. Measurements during hydrate formation and dissociation require careful analysis to properly interpret signatures, in particular when out-of plane conductivity anomalies prevail.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.6
• /
• pp.657-662
• /
• 2005

Iron sulfide(FeS) is significantly produced through both abiotic and biotic processes in natural sediments and pore waters. In this study, chromium(VI) reaction with iron sulfide at various initial concentrations and at pH values of 4 and 8 was conducted to better understand the interactions between Cr(VI) and Fe(II) species dissolved from iron sulfide in both the aqueous and solid phases. Also, the removal efficiency of iron sulfide was compared with zero valent iron and other iron bearing oxides such as ${\alpha}-Fe_2O_3$, ${\alpha}-FeOOH$ and $Fe_3O_4$. The Cr(VI) removal rate by iron sulfide was higher at pH 4 than at pH 8 because more dissolved Fe(II) existed at pH 4 than at pH 8. Chromium and iron(oxyhydroxide) could be identified on the iron sulfide surface with transmission microscopy imaging and energy dispersive spectroscopy. The removal capacity of iron sulfide was much higher than zero valent iron and other iron oxide minerals due to the synergic effect of hydrogen sulfide and ferrous iron.

• Journal of Powder Materials
• /
• v.12 no.1
• /
• pp.36-42
• /
• 2005

Four different mechanical alloying(MA) processes were employed to fabricate very fine intermetallic compound $Al_3Zr$ particles dispersed Al composite materials(MMC) with Al-4at.%Zr composition. Phase transformations including phase stability during MA and heat treatment processes were investigated. Part of Zr atoms were dissolved into Al matrix and part of them reacted with hydrogen produced by decomposition of PCA(methanol) to form hydride $ZrH_2$ during first MA process. These $ZrH_2$ hydrides disappeared when alloy powders were heat treated at $500^{\circC}$. Stable $Al_3Zr$ dispersoids with $DO_23$ structure were formed by heat treating the mechanically alloyed powders at $400^{\circC}$. On the other hand, metastable $Al_3Zr$dispersoids with $L1_2$ structure were formed during first MA of powers with Al-25at.%Zr composition. These metastable $Al_3Zr$ dispersoids transformed to stable $Al_3Zr$ with $DO_23$ structure when heat treated above $450^{\circC}$.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.19 no.2
• /
• pp.187-196
• /
• 2021

Chemical equilibrium calculations for multicomponent aqueous systems involving the reductive dissolution of magnetite (Fe₃O₄) with oxalic acid (H₂C₂O₄) were performed using the HSC Chemistry® version 9. They were conducted with an aqueous solution model based on the Pitzer's approach of one molality aqueous solution. The change in the amounts and activity coefficients of species and ions involved in the reactions as well as the solution pH at equilibrium was calculated while changing the amounts of raw materials (Fe₃O₄ and H₂C₂O₄) and the system temperature from 25℃ to 125℃. In particular, the conditions under which Fe₃O₄ is completely dissolved at high temperatures were determined by varying the raw amount of H₂C₂O₄ and the temperature for a given raw amount of Fe₃O₄ fed into the aqueous solution. When the raw amount of H₂C₂O₄ added was small for a given raw amount of Fe₃O₄, no undissolved Fe₃O₄ was present in the solution and the pH of the solution increased significantly. The formation of ferrous oxalate complex (FeC₂O₄) was observed. The equilibrium amount of FeC₂O₄ decreased as the raw amount of H₂C₂O₄ increased.

• Economic and Environmental Geology
• /
• v.32 no.5
• /
• pp.469-483
• /
• 1999

Two different types of deep groundwaters occur together in the Jungwon area: $CO_2$-rich water and alkali water. Each water shows distrinct hydrogeochemical and environmental isotopic characteristics. The $CO_2$-rich waters are characterized by lower pH(6.0~6.4), higher Eh (25~85mV) and higher TDS content (up to 3,300 mg/l), whereas the alkali type waters have higher pH (9.1~9.5), lower Eh (-136~-128mV) and lower TDS content (168~254 mg/l). The CO2-rich waters ($Pco_2$=up to 1atm) were probably evolved by the local supply of deep $CO_2$ during the deep circulation, resulting in enhanced dissolution of surrounding rocks to yield high concentrations of $Ca^{2+}, Na^+, Mg^{2+}, K^+\; and \;HCO_3\;^-$ under low pH conditions. On the other hand, the alkali type waters ($Pco_2$=about 10-4.6 atm) were evolved through lesser degrees of simple wate/rock (granite) interaction under the limited suppy of $CO_2$. The alkali waters are relatively enriched in F- (up to 14mg/l), whereas the F- concentration of$CO_2$-rich water is lower (2.2~4.8 mg/l) due to the buffering by precipitation of fluorite. The oxygen-hydrogen isotopes and tritium data indicate that compared to shaltion ($\delta$18O=-9.5~-7.8$\textperthousand$),two different types fo deep groudwaters (<1.0TU)were both derived from pre-thermonuclear (more than 40 years old) meteoric waters with lighter O-H isotopic composition ($\delta$18O=-9.5~-7.8$\textperthousand$) and have evolved through prolonged water/rock interaction. The $CO_2$-rich waters also show some degrees of isotopic re-equilibration with $CO_2$ gas. The $\delta^{34}S$ values of dissolved sulfates (+24.2~+27.6$\textperthousand$) in the $CO_2$-rich waters suggest the reduction of sulfate by organic activity at depths. The carbon isotope data show that dissolved carbon in the $CO_2$-rich waters were possibly derived either from dissolution of calcite or from deep $CO_2$ gas. However, strontium isotope data indicate Ca in the $CO_2$-rich waters were derived mainly from plagioclase in granite, not from hydrothermal calcites.

• Proceedings of the Korean Society for Applied Microbiology Conference
• /
• 1979.10a
• /
• pp.245.2-246
• /
• 1979

Heat treated whole cell of Aspergillus niger containing glucose oxidase-catalase system was entrapped in gelatin matrix crosslinked by glutaral-dehyde. The reaction characteristics of immobilized enzyme was studied in a fludized reactor. Heat treatment enhanced the stability and improved the properties of micellium for the immobilized process. The immobilized enzyme system showed the maximum activity at $35^{\circ}C$ and at pH 5.5. The optimum substrate concentration was 0.04M glucose. The activity of immobilized glucose oxidase was in proportion to the concentration of dissolved oxygen in reaction mixture as other reaction conditions were fixed. It was also demonstrated that the limiting factor for the activity of the immobilized glucose oxidase was the oxygen diffusion resistance which increases proportionally to the glucose concentration.

• Applied Biological Chemistry
• /
• v.24 no.3
• /
• pp.194-199
• /
• 1981

In order to compare Kimchi fermentability of Chinese cabbage cultivars, five cultivars grown in Korea were fermented in 3% NaCl. The measurements were done for both the fermenting properties: bacterial growth, $CO_2$ generation, acid production, dissolved oxygen, pH changes in the fermenting broth and extractable sugars form the cabbage tissue and salt solution, respectively. The measured values were scorized to evaluate the cultivar's fitness to Kimchi processing. The most rapid cultivar is Naeseu Baekno and the lowest one is Mussang.