• JSTS:Journal of Semiconductor Technology and Science
• /
• v.1 no.4
• /
• pp.197-201
• /
• 2001

The influence of argon, oxygen, and nitrogen admixtures on the dissociation of $Cl_2$ molecules in a glow discharge low-temperature plasma under the constant pressure conditions was investigated. For $Cl_2/Ar$ and $Cl_2/O_2$mixtures, the concentration of chlorine atoms was observed to be a practically constant at argon or oxygen concentrations up to 50%. This invariability is a most pro bably explained by relative increase in rate of $Cl_2$ direct electron impact dissociation due to the changes in electrophysical parameters of plasma such as EEDF, electron drift rate and mean energy. For all the considered mixtures, the contribution of stepwise dissociation involving active species from gas additives (metastable atoms and molecules, vibrationally excited molecules) was found to be negligible.

• YAKHAK HOEJI
• /
• v.8 no.3
• /
• pp.62-68
• /
• 1964

Author has determined the dissociation velocity constant of carboxyhemoglobin in cattle blood solution by addition of ascorbic acid at $36-38{\deg}.$ It was found that these kinetic data are concordant with Roughton's equation d[COHb]/dt = $m^{'}[CO][O_{2}Hb]/[O_{2}$ - m[COHb] and that the dissociation velocity constant of carboxyhemoglobin was accelerated by the presence of ascorbic acid from 0.119 to 0.135.

• Bulletin of the Korean Chemical Society
• /
• v.19 no.8
• /
• pp.822-824
• /
• 1998

The simple and convenient measurement of the dissociation constant of an indicator, thymol blue, was achieved by using a portable diode-laser/fiber-optic thermal lensing spectroscopy, which consisted of a visible diode laser, a photodiode, and an optical fiber. It gives comparable results to the cited value obtained from a conventional UV/VIS spectroscopy.

• YAKHAK HOEJI
• /
• v.20 no.1
• /
• pp.41-43
• /
• 1976

The dissociation constant of phenol red indicator in mixed solvents was studied. Methanol and ethanol were employed as solvents and studied the changes of pK values of indicator according to the kind and concentration of organic solvent which is mixed into water solution. The effect of methanol solvent on pK is negligible at 40%, 60% and 80% mixing. While in the case of ethanol, the effect of above 40% mixing is not negligible.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.12
• /
• pp.4255-4257
• /
• 2012

• Corrosion Science and Technology
• /
• v.7 no.4
• /
• pp.237-242
• /
• 2008

Physical properties of water, such as dielectric constant and ionic product, significantly vary with the density of water. In the supercritical conditions, since density of water widely varies with pressure, pressure has a strong influence on physical properties of water. Dielectric constant represents a character of water as a solvent, which determines solubility of an inorganic compound including metal oxides. Dissociation equilibrium of an acid is also strongly dependent on water density. Dissociation constant of acid rises with increased density of water, resulting in drop of pH. Density of water and the density-related physical properties of water, therefore, are the major governing factors of corrosion and environmentally assisted cracking of metals in supercritical aqueous solutions. This paper discusses importance of "physical properties of water" in understanding corrosion and cracking behavior of alloys in supercritical water environments, based on experimental data and estimated solubility of metal oxides. It has been pointed out that the water density can have significant effects on stress corrosion cracking (SCC) susceptibility of metals in supercritical water, when dissolution of metal plays the key role in the cracking phenomena.

• Mass Spectrometry Letters
• /
• v.6 no.1
• /
• pp.7-12
• /
• 2015

In the present study, we proposed a simple ESI-MS model for determining $Zn^{2+}$ binding (or dissociation) constants for zinc finger peptides (ZFPs) with a unique ${\beta}{\beta}{\alpha}$ fold consensus. The ionization efficiency (response) factors for this model, i.e., ${\alpha}$ and ${\beta}$, could be determined for ZiCo ZFP with a known $Zn^{2+}$ binding constant. We could determine the binding constants for other ZFPs assuming those with a ${\beta}{\beta}{\alpha}$ consensus conformation have the same ${\alpha}/{\beta}$ response ratio. In general, the ZPF dissociation constants exhibited $K_d$ values of $10^{-7}{\sim}10^{-9}M$, while $K_d$ values for a negative control non-specific $Zn^{2+}$ peptides were high, e.g., $5.5{\times}10^{-6}M$ and $4.3{\times}10^{-4}M$ for BBA1 and melittin, respectively.

• Molecules and Cells
• /
• v.24 no.1
• /
• pp.119-124
• /
• 2007

TLR4 together with CD14 and MD-2 forms a pattern recognition receptor that plays an initiating role in the innate immune response to Gram-negative bacteria. Here, we employed the surface plasmon resonance technique to investigate the kinetics of binding of LPS to recombinant CD14, MD-2 and TLR4 proteins produced in insect cells. The dissociation constants ($K_D$) of LPS for immobilized CD14 and MD-2 were $8.7{\mu}m$, and $2.3{\mu}m$, respectively. The association rate constant ($K_{on}$) of LPS for MD-2 was $5.61{\times}10^3M^{-1}S^{-1}$, and the dissociation rate constant ($K_{off}$) was $1.28{\times}10^2S^{-1}$, revealing slow association and fast dissociation with an affinity constant $K_D$ of $2.33{\times}10^6M$ at $25^{\circ}C$. These affinities are consistent with the current view that CD14 conveys LPS to the TLR4/MD-2 complex.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2003.11a
• /
• pp.695-702
• /
• 2003

In this study, an experimental apparatus has been designed and set-up to analyse the dissociating phenomena of hydrate in porous rock using electric heating method supplied at downhole. The electric heat injecting experiments have been performed to investigate the heat transfer within the core, the dissociating phenomena of hydrate, and the productivities of dissociated gas and water. These experiments were under constant heat injecting method as well as preheating methods. From the experimental results, it is seen that the hydrates is dissociated along the phase equilibrium curve and dissociation of hydrate is accelerated with heat. The injected heat is consumed for the dissociation and also it is lost together with outflow of the dissociated gas and water. From the investigation of gas producing behavior for various heat injecting methods, as the injected heat is greater, dissociation is accelerated faster at outlet and hence the initial gas production becomes higher. Also, it is shown that the initial gas productivity under the constant heating method is better, however, the energy efficiency is low because of smaller amount of the produced gas comparing to the amount of heat injected. In the experiments of preheating method, it was seen that gas production only initial stage is different with the preheating time, but the producing behaviors of gas production are similar.

• YAKHAK HOEJI
• /
• v.18 no.3
• /
• pp.197-202
• /
• 1974

The data pf dosspcoatopm cpmstamts for aliphatic amines and quaternary ammonium-methylorange salts are based on the electrosatic theory of conductance. Dissociation constants for primary amines nad quaternary ammonium-methylorange salts (1$\times$10$^{-5}$~1$\times$10$^{-3}$ M) in nitrobenzene solution or water solution was evaluated from the relation of the concentration and the electric conduction and the electric conductance at $25^{\circ}C$ Plots of ${\delta}C$ against reciprocal conductance were linear ; hence the center-to-center distance of this salt was 1.75 $\AA$ in nitrobenzene solution.