• Journal of Science Education
• /
• v.37 no.1
• /
• pp.233-243
• /
• 2013

The purpose of this study is to develop the syringe experiment device which is able to analyze the relationship between the length of the air pillar and resonance frequencies quantitatively for the education of sound resonance. We made an air pillar resonance device with a 'Head', which is used by the disposable syringe and the plastic sphere for constructing molecular models. We also assembled PC experiment equipment which is used by commercial software. As a result, it appears this equipment can be used instead of the current device used by experts. It was proved that this syringe device is not the 'pipe' but the 'Helmholtz resonator'. It appears that data through resonance experiments can prove the sound resonance phenomenon. In conclusion, this syringe resonator is the experiment device that can be used in the gifted education for middle-high school students and acoustic experiments for university students.

• Safety and Health at Work
• /
• v.14 no.2
• /
• pp.237-242
• /
• 2023

Background: This study evaluated occupational exposure levels of doxorubicin in healthcare workers performing rotational intraperitoneal pressurized aerosol chemotherapy (PIPAC) procedures. Methods: All samples were collected during PIPAC procedures applying doxorubicin to an experimental animal model (pigs). All procedures were applied to seven pigs, each for approximately 44 min. Surface samples (n = 51) were obtained from substances contaminating the PIPAC devices, surrounding objects, and protective equipment. Airborne samples were also collected around the operating table (n = 39). All samples were analyzed using ultra-high performance liquid chromatography-mass spectrometry. Results: Among the surface samples, doxorubicin was detected in only five samples (9.8%) that were directly exposed to antineoplastic drug aerosols in the abdominal cavity originating from PIPAC devices. The telescopes showed concentrations of 0.48-5.44 ng/cm² and the trocar showed 0.98 ng/cm² in the region where the spraying nozzles were inserted. The syringe line connector showed a maximum concentration of 181.07 ng/cm², following a leakage. Contamination was not detected on the surgeons' gloves or shoes. Objects surrounding the operating table, including tables, operating lights, entrance doors, and trocar holders, were found to be uncontaminated. All air samples collected at locations where healthcare workers performed procedures were found to be uncontaminated. Conclusions: Most air and surface samples were uncontaminated or showed very low doxorubicin concentrations during PIPAC procedures. However, there remains a potential for leakage, in which case dermal exposure may occur. Safety protocols related to leakage accidents, selection of appropriate protective equipment, and the use of disposable devices are necessary to prevent occupational exposure.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.24 no.1
• /
• pp.81-86
• /
• 2015

This paper presents a disposable passive suction pump that uses the restoring force of an elastomeric chamber for liquid transportation in a microfluidic system. The proposed suction pump can be operated by finger pressure without any peripheral equipment. To adjust the generated suction pressure, five different displacements of the suction chamber ceiling, two different chamber shapes, and five different elastic moduli of the elastomer were considered. For a cylindrical chamber with a 5 mm height and 5 mm radius, the generated suction pressure and flow rate increased almost linearly up to about 31 kPa and $160.8{\mu}L/min$, respectively, depending on the chamber deformation. A maximum suction pressure of $42.9{\pm}0.7kPa$ was obtained for a hemispherical chamber with a 2.1 mm height and 5 mm radius.

• Journal of the Korean Society of Safety
• /
• v.23 no.6
• /
• pp.62-69
• /
• 2008

As the concerns of dermal exposure of spray painters to isocyanates in the automobile industry, glove performance was examined like permeation rate and breakthrough time including fatigue test. Methylene chloride was used as the solvent for derivatization of the isocyanates with a 97.5% recovery. Ghost wipe pads were used to wipe the surface of the glove material after chemical penetration through the glove material placed under a disposable test cell. Several solvents were tested, such as thinner(xylene, toluene) and cleaning agent(acetone) by using a standard permeation test cell(AS/NZS standard 2161. part 10.3). Solvents accelerate chemical permeation through the gloves more quickly than pure HDI hardener products. The longest breakthrough times were from Nitrosolve gloves, not detected in 8 hours, compared with others like Latex, Neoprene, TNT and Dermo Plus. Therefore Nitrosolve gloves could be recommended as personal protective equipment in crash repair shops. In addition, revised exposure limit of korean regulation should be suggested for employee to minimize the risk of health symptoms.

• The Korean Nurse
• /
• v.35 no.2
• /
• pp.71-91
• /
• 1996

The objectives of thes study were to identify the need for equipment development in nursing, and to determine the priorities for that development. The study was descriptive study done between March 2 and May 30, 1995, in which the subjects, including 421 patients, 223 family members, and 198 nurses from neurosurgery, orthopedic, rehabilitation medicine, internal medicine and intensive care units of nine general hospitals in Seoul, completed a questionnarie developed by the research team. The questionnaire consisted of 35 open and closed questions. Data was analyzed using frequencies and percentages. The results ware summarized as follows: 1) The average age of the nurses was 27.9 years, 48% of the patients were between 20 and 40 years of age, and 17% were over 60. The average lingth of experience for the nurse subjects was four years five months with 36.9%. having over five years experience. The most frequent diagnoses of patients were spinal disc(35.9%), internal medicine disease(26.0%), cerebral vascular accident(16.6%) and spinal cord injury(10%) 2) Many of the nurses(96.4%) reported deficiencies with existing equipment and 96.5% of the nurses, but only 79.8% of the patients, nurses' time. Further, 82.3% of the nurses and 75.8% of the patients felt that the development of new equipment would lead to a decrease in the cost of nursing care. 3) Nurses felt that the greatest areas of inconvenience were patient feeding(71.7%), hygiene(71.2%), caring for a patient confined to bed(70.7%), patient clothing(67.2%), mobility transfers(63.5%) and urinary elimination(52.0%). However, patients and family members listed the following as being the most inconvenient: urinary elimination(58.7%), Hygiene(50.5), feeding(48.4%), mobility transfers(47.1%) and bed care(45.2%). 4) Generally the nurses listed more inconveniences and patients and family members listed more demands for the development of equipment. These included utensils with large handles, and regulators for tube feedings; mattresses that provide for automatic position change and massage, which have patient controlled levers and a place for bed pan insertion; automatic lifts or transfer from bed to wheelchair; equipment to facilitate washing and oral hygiene as well as equipment that will allow patients with spinal cord injuries easy access to showers; a bed pan/urinal for women that is comfortable and effective from which urine can be measured and disposed of easily; disposable dressing sets and tracheostomy care sets and a convenient way of measuring changes in wound size; a safe delivery system for oxygen, a variety of mask sizes and better control of humidity, tracheal material than at present, as well as a communication system for patients with tracheostomies; clothing that will allow access to various parts of the body for treament or assessment without patients having to remove all of their clothing; and finally a system that will allow the patient to control lighting, telephones and pagers. Priority areas for equipment development reported by the nurses were, urinary elimination(58. 7%), hygiene(50.5%), feeding(48.4%), mobility transfers(47..1%), bowel elimination(40.8%). Those reported by the patients family members were feeding(71.7%), hygiene(70.0%), bedcare(70.7%), clothing(67.2%), mobility transfers(63.6%), urinary elimination(52.9%) and bowel elimination(50.5%) Altogether, nurses, patients and family members listed the following as priorities; clothing (178), bed care(144), urinary elimination(92), environment(81), hygiene(70). Further, a health professional forum listed urinary elimination, oxygen delivery, medication delivery, mobility transfers, bed care and hygiene in that order as priority areas. From this study it can be concluded that the first need is to develop equipment that will address the problems of urinary elimination. To do (l)This nurses who are interested in equipment development should organize an equipment development team to provide a forum for discussion and production of equipment for nursing.

• Korean Journal of Clinical Laboratory Science
• /
• v.55 no.3
• /
• pp.143-150
• /
• 2023

The global outbreak of COVID-19 has underscored the pressing need for robust infection control practices in pulmonary function laboratories (PFL). However, the existing guidelines and regulatory frameworks provided by relevant authorities in the country have revealed certain deficiencies in effectively addressing this significant public health crisis. This study surveyed the infection control regulations, disposable item usage, ventilation facilities, spatial separation, and the configuration of entrance doors in 51 domestic hospital facilities from Oct 1, 2021, to Nov 2, 2021. The survey findings revealed that while there was a relatively satisfactory adherence to airborne, droplet, and contact precautions with adequate awareness and utilization of personal protective equipment, the environmental disinfection practices exhibited a suboptimal performance rate of 39.22% per patient. Depending on the specific survey domains, substantial variations were observed in the utilization of disposable items (81.05%), ventilation systems (45.75%), dedicated testing spaces (80.39%), separation of administrative areas (15.69%), and the installation of automated doors (19.61%). This study not only highlights the paramount importance of infection control in PFLs within domestic medical institutions but also provides foundational data for developing and enhancing standardized guidelines that align with international benchmarks for infection control in these settings.

• Journal of Digital Convergence
• /
• v.18 no.11
• /
• pp.329-336
• /
• 2020

The study investigated the perception and experience of infection control targeting dental users. During July-August 2020, 198 adults over the age of 20 were surveyed on general characteristics, infection control awareness and experience, and improvement. Analysis was performed using PASW Statistics ver 18.0. The research results, 91% of dental users recognized that infection control was important. In the recognition of infection control were highly investigated oral treatment equipment sterilization, hand hygiene and glove replacement before and after treatment by dental staff. And dental users was relatively low the replacement of disposable gowns and safety glasses for each patient by medical staff. The dental staff are doing well in personal protection and instrument sterilization. Surface disinfection and water quality management needed improvement. It was meaningful to suggest improvement in infection control based on the perception and experience from the perspective of dental users. It is expected to be used as basic data necessary for high-quality medical services through infection control in dental medical institutions.

• Journal of Technologic Dentistry
• /
• v.33 no.1
• /
• pp.93-102
• /
• 2011

Purpose: The study aimed to evaluate working environment for dental technician by measuring dust level, ventilation conditions and the use of personal protective equipment and to provide basic information required to improve working environment and develop health education programs for dental technician. Methods: A total of 240 dental technician who are registered with the Daegu Association of Dental technician and working at 34 dental laboratories participated in the study. And the dust level was measured at 21 different spots in 16 dental laboratories out of 34. Results: Of 34 dental laboratories, 31 (91.2%) were equipped with a ventilator, but the remaining 3 (8.8%) did not have a ventilator. By the number of ventilator, 1 to 3 ventilators were found in 22 dental laboratories (71.0%), 4 to 6 ventilators were in 7 laboratories (22.5%) and more than 7 ventilators in 2 laboratories(6.5%). According to the frequence of changing filters in dust collector, 20 dental laboratories (58.9%) changed filters every four weeks, 10 laboratories (29.4%) changed them every six weeks and 4 laboratories (11.7%) changed them every eight weeks. Of total respondents, 114 (61.3%) said they wore a mask all the time while working, 56 (29.6%) said they frequently wore a mask, 19 (10.1%) said they did not wear a mask. As for the type of masks, 159 (84.1%) used a disposable mask, 25 (13.2%) used a cotton mask and 5 (2.7%) used an anti-dust mask. For dust sat on their outfits while working, 102 (54.0%) shook their uniforms inside workplace to keep dust off the uniforms, 64 (33.9%) did not anything until they wash their uniforms and 23 (12.1%) shook their uniforms outside workplace to keep dust off the uniforms. Of total respondents, 182 (96.3%) had a particle in their eyes while carrying out grinding work. Based on the measurement of floating dust at workplace, 3 dental laboratories showed dust concentration exceeding the minimum level of 10 mg/$m^3$ allowed under the permit for environment. Of those, 1 laboratory had the dust concentration that was more than 1.5 times higher than the minimum level. Dust concentration was higher in laboratories that used a dust collector with 0.5 horse power and changed filters more than 3 weeks ago. Dust comprised of nickel (more than 70%), chrome (9%) and others. The mean chrome concentration was more than twice higher than the minimum permissible level of 0.5 mg/$m^3$. There were two laboratories that showed chrome concentration exceeding the level of 0.4 mg/$m^3$. Like dust concentration, chrome level was higher in laboratories that used a dust collector with 0.5 horse power and changed filters more than 3 weeks ago. There were six laboratories that had nickel concentration exceeding the minimum permissible level of 1 mg/$m^3$. Of those, one laboratory had nickel concentration that was more than three times higher than the minimum permissible level. Nickel concentration was also higher in laboratories that used a dust collector with 0.5 horse power and changed filters more than 3 weeks ago. Conclusion: It is not likely that heavy metal concentrations found in the study constitute respiratory dust. It is however necessary for health of dental technician to apply the Industrial Safety and Healthy Law to dental laboratories and make recommendations for the use of personal protective equipment, installation of a proper number of ventilators, more frequent change of filters in dust collector and improved ventilation for polishing work. At the same time, dental technician need education on how to use personal protective equipment and how to efficiently remove dust from their uniforms.

• Journal of dental hygiene science
• /
• v.7 no.1
• /
• pp.1-7
• /
• 2007

This study aimed to provide basic information on dental hygienists' practicing the prevention of infections by figuring out their actual conditions in dental clinics. The subjects of the study were the dental hygienists who participated in the continuing medical education of Incheon & Gyeonggi-do association and Seoul city association in October and November 2005 and the self-administered surveys were used for the prevention of infections. The results were as below. 1. In terms of education experiences of infection prevention, those who answered "there were" were 72 persons (42.9%) and those who followed the educational route for infection prevention were "through the in-house education from the hospital" and they were 42 persons (58%), which were highest. 2. In terms of the injury experiences, those who answered "there were" were 147 persons (87.5%) and the number of annual injury out of 147 persons with injury experiences was 7.7 time. For the tools that were damaged, 125 persons (75%) damaged the "explorer," which was highest. 3. For the experiences of being infected with contagious diseases, those who answered "there were" were 6 persons (3.6%) and there were four persons for "hepatitis B", one person for "rubella" and one person for "TB." 4. The questions with high practice scores were as in the following: "2. I wash my hands after conducting medical examinations (1.86 points)," "7. I always close the lid of a shot of Novocain after doing local anesthesia (1.86 points)" and "20. I separate and collect the wastes and give them to those who treat accumulated materials (1.85 points)". Meanwhile, the questions with low practice scores were as below: "16. I change my medical gowns (doctor wears) once a day (0.24 point)" and "I wash my medical gowns every time after examining patients with contagious diseases (0.52 points)." 5. The question with high knowledge was as below: "1. The contagion during the dental treatment is determined by source of infection, infection methods, infection routes and the host that is prone to infection (0.95 point)" and the question with the lowest knowledge was "5. HBV(hepatitis B) is destroyed after adding 95oC of heat for more than 5 minutes (0.27 points)." 6. The question with the highest organization-related factors was "I am always ready to use a mask, gloves, etc. if necessary" (0.89 points)" and the question with the lowest score was "There is a guideline that I can refer when I am exposed to dangerous situations related to the contagion in my workplace (0.33 point)." 7. In terms of the equipment conditions of protectors in medical environments, 168 persons for (disposable) mask (100%), 167 persons for disposable gloves (Latex) (99.4%), which meant that most of them were equipped with them. On the contrary, 108 persons (64.3%) are equipped with the protectors for frontal faces, which is the lowest and 165 persons (98.2%) said that they had autoclave in their disinfecting and sterilizing devices.

• Journal of Korean society of Dental Hygiene
• /
• v.9 no.4
• /
• pp.849-863
• /
• 2009

Objectives : This study was to study dental hygiene department students' management of infection and their attitude toward infection. Methods : This study was conducted from August 24, 2009 to September 20, 2009. 269 sophomore and junior college students enrolled in the department of dental hygiene from schools located in Gyeonggi-do and Gangwon-do participated in the study. A self-administered questionnaire survey was conducted. Results : 1. As for dental hygiene department students' recognition of the causes of infectious diseases, 80.7% of the respondents said hepatitis B was the infectious disease highly likely to occur in laboratories. 35.3% was correct about the antecedent variables of infection in the workshop, 24.9% about the oral symptoms of HIV and 18.6% about the diseases induced by HBV. The recognition rates were generally low. 2. About whether the respondents ask patients questions about infectious diseases, 80.7% of them answered Yes, but only 56.2% of them said they do so every time, and 17.8% of them said they never do so. 3. As far as washing hands to prevent infectious diseases is concerned, 97.4% of the respondents said hand washing helps prevent infection. 72.5% of them said they wash their hands every time before they practice on a patient, while 84.0% of them said they washed their hands after the lab practice. 90.7% said they use liquid soap containing anti-microbial agents, and 81.8% of them said they use paper towels. 4. With regard to protective gear for prevention of infectious diseases, 98.9% of the respondents said it is desirable to use disposable protective gear for each patient. When it comes to what they actually used as protective gear, 91.1% said aprons, 89.2% gloves, and 87.7% masks. However, a low percentage of the respondents actually use goggles and replace masks when they got damp, 11.2% and 24.2% respectively. Conclusions : As for treating the surface of equipments to prevent infectious diseases, most of the respondents exhibited a high recognition rate. Relative fewer respondents actually treat the surface of equipments than those respondents who are aware of the need to do so. A high percentage of the respondents also said they use alcohol sponge to treat the surface of each equipment in order to prevent infectious diseases.