• Journal of Information Display
• /
• v.13 no.1
• /
• pp.17-20
• /
• 2012

The current panels for liquid crystal display (LCD) TV sets are all characterized by pins placed on two sides. To manufacture one type of panel, a dedicated mask is needed, and the production line should be started once. Moreover, the whole panel needs to be removed if a dead pixel is found. If the panel, however, will first be fabricated with pins placed on four sides and then divided by a cross-cut into four equal-sized panels with pins placed on two sides, one set of masks can be used to manufacture two types of LCD panels, which was referred to by the authors as dual mode. In this paper, the concept of the dual mode and its differences from the conventional way of producing panels are introduced. Its advantages in boosting production efficiency, improving the product's good rate, and lowering the production cost are also described based on case studies. Of particular importance is the fact that the dual mode is very suitable for the trial production of very-large-area LCD TV sets.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.46-49
• /
• 2002

Recent trends of low-temperature polycrystalline Si (LTPS) TFT technologies are presented. Characteristics of LTPS TFT processes are compared with those of a-Si TFT's. In order to compete with well-established a-Si TFT-LCD technology, LTPS process has to be as simple as possible. One of the most critical processes, recrystallization of a-Si thin films, could be the process for the differentiation of LTPS technology. Along with these technical reviews, a recent development of the 5.0-inch LTPS TFT-LCD is presented. In order to achieve high-performance display characteristics and save the power consumption, the transflective mode is adopted. The 5.0-inch display with 186 pixel-per-inch, high-resolution LCD was measured to be 10% for the reflectance and 70:1 for the contrast ratio. This display is designed for a high information content hand-held PC (HHPC) application.

• Korean Journal of Optics and Photonics
• /
• v.23 no.4
• /
• pp.147-153
• /
• 2012

Multi-view 3D displays based on a limited number of pixels have the problem that the stereo-scopic image has a low resolution because of increasing view number. To solve the problem of low resolution, we propose an optical approaching method that focuses the width of a unit pixel by using a commercial spherical shape lenticular lens sheet and increases the effective resolution by increasing the number of sources of light in the multi-view 3D display system based on projection type. The method was performed in such an order that several main derivable parameters were defined, and, through the theoretical and experimental result, the value of the contractible unit pixel width and the scalable effective resolution was derived in a given system environment. As a result, for the case that the ray of light from the projector transmitted the 25 LPI lenticular lens sheet which has the pitch size 1.016 mm, the focused unit pixel width was 0.19 mm and the scalable effective resolution was, at most, 5 times wider than the original one. In addition, the range of depth of focus was 1.496 mm, which shows us the range of thickness tolerances of commercial spherical shape lenticular lens sheet and sufficient optical alignment tolerances.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.537-539
• /
• 2006

We developed an 4.5" $192{\times}64$ active matrix organic light-emitting diode display on a glass using organic thin-film transistor (OTFT) switching-arrays with two transistors and a capacitor in each sub-pixel. The OTFTs has bottom contact structure with a unique gate insulator and pentacene for the active layer. The width and length of the switching OTFT is $800{\mu}m$ and $10{\mu}m$ respectively and the driving OTFT has $1200{\mu}m$ channel width with the same channel length. On/off ratio, mobility, on-current of switching OTFT and on-current of driving OTFT were $10^6,0.3{\sim}0.5\;cm^2/V{\cdot}sec$, order of 10 ${\mu}A$ and over 100 ${\mu}A$, respectively. AMOLEDs composed of the OTFT switching arrays and OLEDs made using vacuum deposition method were fabricated and driven to make moving images, successfully.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.15 no.2
• /
• pp.13-20
• /
• 2011

Purpose: The limited FOV(Field of View) of CT (Computed Tomography) can cause truncation artifact at external DFOV (Display Field of View) in PET/CT image. In our study, we measured the difference of SUV and compared the influence affecting to the image reconstructed with the extended DFOV. Materials and Methods: NEMA 1994 PET Phantom was filled with $^{18}F$(FDG) of 5.3 kBq/mL and placed at the center of FOV. Phantom images were acquired through emission scan. Shift the phantom's location to the external edge of DFOV and images were acquired with same method. All of acquired data through each experiment were reconstructed with same method, DFOV was applied 50 cm and 70 cm respectively. Then ROI was set up on the emission image, performed the comparative analysis SUV. In the clinical test, patient group shown truncation artifact was selected. ROI was set up at the liver of patient's image and performed the comparative analysis SUV according to the change of DFOV. Results: The pixel size was increase from 3.91 mm to 5.47 mm according to the DFOV increment in the centered location phantom study. When extended DFOV was applied, $_{max}SUV$ of ROI was decreased from 1.49 to 1.35. In case of shifted the center of phantom location study, $_{max}SUV$ was decreased from 1.30 to 1.20. The $_{max}SUV$ was 1.51 at the truncated region in the extended DFOV. The difference of the $_{max}SUV$ was 25.9% higher at the outside of the truncated region than inside. When the extended DFOV was applied, $_{max}SUV$ was decreased from 3.38 to 3.13. Conclusion: When the extended DFOV was applied, $_{max}SUV$ decreasing phenomenon can cause pixel to pixel noise by increasing of pixel size. In this reason, $_{max}SUV$ was underestimated. Therefore, We should consider the underestimation of quantitative result in the whole image plane in case of patient study applied extended DFOV protocol. Consequently, the result of the quantitative analysis may show more higher than inside at the truncated region.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.04a
• /
• pp.57-58
• /
• 2009

The dynamics of nano or micro sized-particles in liquid crystal (LC) medium under an external electric field is of theoretical and technological interest. A fullerene of 10 wt% was doped into the LC medium and its electric field induced motion was controlled by both in-plane and vertical electric fields. In the proposed device, pixel electrode I and pixel electrode II were designed consecutively on the bottom substrate and common electrode on the top of the substrate. When the electric field was applied, the fullerenes start to move in direction of applied electric field. The dark, grey and white states in the proposed device can be obtained by suitable combination of the polarity of applied electric field at pixel electrode I, pixel electrode II and common electrode. The dynamical motions of fullerene particles in LC medium suggest that fullerene can be designed for electronic-paper like displays.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.3
• /
• pp.113-121
• /
• 2013

In this paper, we propose a sub-pixel rendering algorithm using learning-based 2D FIR filters. The proposed algorithm consists of two stages: the learning and synthesis stages. At the learning stage, we produce the low-resolution synthesis information derived from a sufficient number of high/low resolution block pairs, and store the synthesis information into a so-called dictionary. At the synthesis stage, the best candidate block corresponding to each input high-resolution block is found in the dictionary. Next, we can finally obtain the low-resolution image by synthesizing the low-resolution block using the selected 2D FIR filter on a sub-pixel basis. On the other hand, we additionally enhance the sharpness of the output image by using pre-emphasis considering RGB stripe pattern of display. The simulation results show that the proposed algorithm can provide significantly sharper results than conventional down-sampling methods, without blur effects and aliasing.

• Current Optics and Photonics
• /
• v.1 no.2
• /
• pp.143-149
• /
• 2017

LED arrays with pixel numbers of $3{\times}3$, $4{\times}4$, and $5{\times}5$ have been studied in this paper in order to enhance the optical output power and decrease heat dissipation of an AlGaInP-based light emitting diode display device (pixel size of $280{\times}280{\mu}m$) fabricated by micro-opto-electro-mechanical systems. Simulation results showed that the thermal resistances of the $3{\times}3$, $4{\times}4$, $5{\times}5$ arrays were $52^{\circ}C/W$, $69.7^{\circ}C/W$, and $84.3^{\circ}C/W$. The junction temperature was calculated by the peak wavelength shift method, which showed that the maximum value appears at the center pixel due to thermal crosstalk from neighboring pixels. The central temperature would be minimized with $40{\mu}m$ pixel pitch and $150{\mu}m$ substrate thickness as calculated by thermal modeling using finite element analysis. The modeling can be used to optimize parameters of highly integrated AlGaInP-based LED arrays fabricated by micro-opto-electro-mechanical systems technology.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.616-619
• /
• 2004

The approach is based on a phenomenon of lighting on electronic transient response of a PMOLED pixel. It achieves a speedy measurement because of using a compact algorithm; therefore, the method is suitable applied to production lines for examining quality of PMOLEDs panels

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.239-242
• /
• 2004

This paper presents a novel contrast enhance algorithm for images displayed with bright environment light. This algorithm is designed to preserve local contrast based on the luminance ratio of the pixel to its local surround in attention. This algorithm improves image quality of projectors in a bright room.