• 반도체디스플레이기술학회지
• /
• 제18권2호
• /
• pp.63-66
• /
• 2019

Due to the development of medical imaging technology, different imaging technologies provide a large amount of effective information. However, different imaging method caused the limitations of information integrity by using single type of image. Combining different image together so that doctor can obtain the information from medical image comprehensively. Image registration algorithm based on mutual information has become one of the hotspots in the field of image registration with its high registration accuracy and wide applicability. Because the information theory-based registration technology is not dependent on the gray value difference of the image, and it is very suitable for multimodal medical image registration. However, the method based on mutual information has a robustness problem. The essential reason is that the mutual information itself is not have enough information between the pixel pairs, so that the mutual information is unstable during the registration process. A large number of local extreme values are generated, which finally cause mismatch. In order to overcome the shortages of mutual information registration method, this paper proposes a registration method combined with image spatial structure information and mutual information.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.972-974
• /
• 2009

This paper presents smart regional contrast enhancement technique of partitioned image for local dimming backlight on small-sized mobile display to reach two goals. One is to save the power consumption, and the other to improve contrast ratio of display image. Recently new advanced method is proposed, named local dimming method, that backlight LED is positioned on backside of the display panel. So it is important to partition an image by sub blocks and then post-processing independantly. This means regional contrast enhancement. After partitioning, we compare the mean luminance(Y) value of each sub-block image with the one of original whole image. If some blocks have the mean value lower than the one of whole image, they are processed with the proposed method and others are bypassed. Simultaneously the information of the processed blocks are transferred to BLC(Backlight LED Controller). And then the supply current of each backlight LED is reduced to realize the contrast ratio enhancement and at the same time to power consumption reduction. In addition, we verify this proposed method is free from blocking artifacts.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2016년도 추계학술대회
• /
• pp.552-555
• /
• 2016

기존의 거울이라고 하면 단순히 자신의 모습을 보는 용도로 쓰였다. 하지만 현재 상용화 되고 있는 "Mirror Display"는 미용실의 전면 거울, 대형 백화점의 쇼핑 코너와 화장품 코너 등에 설치 되어 있다. 추가로 거울에 광고와 특정 서비스 등으로 부가적인 수익을 창출해 나가고 있다. 본 논문에서는 "Mirror Display"를 소형화하여 가정집에서 사용자의 설정에 따라 일기 예보, 캘린더, 시간, 교통정보, 중요 뉴스 등을 제공한다. 또한 홀로그램 기술을 접목하여 3D 출력방식으로 필요한 정보를 보여준다는 것은 거울의 본질을 극대화 할 수 있을 것이다. 이런 사용자 만족도를 상승 시킬 "Hologram Mirror Display"를 구현한다.

• Journal of information and communication convergence engineering
• /
• 제12권4호
• /
• pp.208-214
• /
• 2014

In this paper, in order to solve the problems of a narrow viewing angle and the flip effect in a three-dimensional (3D) integral imaging display, we propose an improved system by using an eye tracking method based on the Kinect sensor. In the proposed method, we introduce two types of calibration processes. First process is to perform the calibration between two cameras within Kinect sensor to collect specific 3D information. Second process is to use a space calibration for the coordinate conversion between the Kinect sensor and the coordinate system of the display panel. Our calibration processes can provide the improved performance of estimation for 3D position of the observer's eyes and generate elemental images in real-time speed based on the estimated position. To show the usefulness of the proposed method, we implement an integral imaging display system using the eye tracking process based on our calibration processes and carry out the preliminary experiments by measuring the viewing angle and flipping effect for the reconstructed 3D images. The experimental results reveal that the proposed method extended the viewing angles and removed the flipping images compared with the conventional system.

• Journal of Information Display
• /
• 제3권4호
• /
• pp.1-3
• /
• 2002

The antiferroelectric liquid crystal display (AFLCD) is a unique display that can at demonstrate a moving image perfectly the passive matrix driving scheme. We optimised driving the waveform and introduced a dual-driving method. Also, by improving this driving method and using line inversion method, we realize the AFLC display of high image quality with $160(RGB){\times}240$, 32768 colors, crosstalk free and flicker free contrast ratio is greater than 60:1, and the brightness is above 200 $cd/m^2$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.230-233
• /
• 2003

New photopolymers were designed and prepared using the photosensitive polymer binders. The photochemical reaction of the photosensitive polymer binder was studied by virtue of UV absorption and infrared spectroscopy. The holographic gratings were successfully fabricated in these photopolymer film samples by conventional optical interference method. We also investigated the effect of photocrosslink in the polymer binder on the diffraction behavior of the photopolymer. The dynamic behaviors of the grating formation were studied with the change of exposure intensity in terms of the diffraction efficiency. Particularly, we focused our efforts to observe the variation of the diffraction efficiency during post UV curing process.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1642-1645
• /
• 2007

The brightness of LED changes according to the current flowing through LEDs. The current mirror was used to drive LEDs effectively. The reference current of the current mirror was usually controlled by the resistor but the size of this resistor is very large and this resistor consumes too much power for high power LED backlight driving. The reference current of the current mirror LED driver was controlled by using flyback converter at small size with low power consumption in this paper. The concept of active current source was presented.

• 전자공학회논문지CI
• /
• 제41권1호
• /
• pp.27-37
• /
• 2004

색상 정보를 이용한 프로젝션 화면(projection display)상의 전경물체 검출(foreground object detection)은 조명 변화나 복잡한 배경 때문에 어렵다고 알려져 있다. 본 논문에서는 프로젝터의 입력 영상과 프로젝션 화면을 촬영한 카메라 영상들로부터 얻어진 색상 정보를 이용한 전경물체 검출 방법을 제안한다. 두 영상사이에 기하 왜곡과 색상 왜곡이 존재한다고 가정한다. 두 영상사이의 관련된 화소를 찾기 위해 투영변환방법(projective transformation)을 사용하여 기하 왜곡을 보정한다. 프로젝션화면상에 전경물체가 없을 때 관련된 화소사이의 색상 차이를 프로젝션 화면상의 자연스러운 왜곡으로 모델링한다. 이를 다항식 근사 방법(polynomial fitting)으로 모델링한다. 영상 내 어떤 위치에서 관련된 화소 사이의 차이가 주어진 다항식에서 예측된 색상차이보다 클 때 전경물체가 있는 것으로 간주한다. 실험 및 결과에서 제안된 전경물체 검출 방법이 디지털 데스크(DigitalDesk)같은 프로젝션 화면 시스템에 적용 가능하다는 것을 보였다.

• Bulletin of the Korean Chemical Society
• /
• 제28권8호
• /
• pp.1389-1395
• /
• 2007

Two series of new organic fluorophores such as asymmetrical 3-(benzimidazol-2-yl)-10-hexylphenothiazine derivatives 1 and symmetrical 3,7-bis(benzimidazol-2-yl)-10-hexylphenothiazine derivatives 2 have been synthesized. Electronic absorption, fluorescence, and electrochemistry measurements reveal that the electron withdrawing benzimidazole subunit directly connected to the phenothiazine core facilitates the charge transfer characters which were also verified by the theoretical calculations. Various substituents on the benzimidazole moieties can allow a fine-tuning of the LUMO energy levels of the molecules without significantly affecting the HOMO energy levels. The method provides a new route for designing ambipolar molecules whose energy levels are well-matched with the Fermi levels of the electrodes to facilitate the electron or hole injection/transfer in OLED devices.

• Current Optics and Photonics
• /
• 제4권6호
• /
• pp.524-529
• /
• 2020

We propose a depth-fused-type three-dimensional (3D) near-eye display implemented using a birefringent lens set that is made of calcite. By using a birefringent lens and image source (28.70 mm × 21.52 mm), which has different focal lengths according to the polarization state of the incident light, the proposed system can present depth-fused three-dimensional images at 4.6 degrees of field of view (FOV) within 1.6 Diopter (D) to 0.4 D, depending on the polarization distributed depth map. The proposed method can be applied to near-eye displays like head-mounted display systems, for a more natural 3D image without vergence-accommodation conflict.