• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.475-478
• /
• 2007

A solution for carbon nanotube based field emission displays has been designed and built. The solution makes use of structure layout to control electron beam trajectories, uniformity by use of ballasting, emission anomalies eliminated by selective carbon nanotube growth and invisible spacers to maintain the vacuum gap.

• Journal of Information Display
• /
• v.2 no.2
• /
• pp.13-21
• /
• 2001

We propose a universal image processor for a-Si TFT LCD of UXGA class that can display the full screen on the LCD panel with low resolution of video sources such as NTSC, VGA, SVGA, XGA, and SXGA by using the proposed interpolation filter. In addition, we propose a real-time contrast controller for image improvement of multi-gray scale image. The operation of the proposed methods has been verified using Synopsys VHDL and computer simulation. Results show that the proposed methods might be suitable for a UXGA LCD controller for real-time image improvement.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1999.11a
• /
• pp.107-112
• /
• 1999

증기터빈 및 발전기의 특성을 그대로 모사 하는 PC 기반의 시뮬레이터를 개발하였으며, 사용자가 개발된 시뮬레이터의 기능들을 적절하고 편리하게 사용할 수 있도록 인간공학의 원칙을 고려하여 설계하였다. 이를 위해 시뮬레이터가 가져야 하는 기능들을 시험절차 및 운전 절차를 분석하여 도출하였으며 그 기능들을 각 사용자 인터페이스의 설계 목적에 맞도록 적절하게 배치하였다. 본 논문에서 소개하고자 하는 사용자 인터페이스는 Main Window에서 항상 감시가 가능하도록 설계된 Mimic Display, Information Tiles Display로 시뮬레이터 사용자 인터페이스의 핵심이라고 할 수 있다.

• Korean Journal of Optics and Photonics
• /
• v.23 no.6
• /
• pp.255-263
• /
• 2012

In this paper, we designed a tabletop display which enables two viewers each to see a different image simultaneously within his/her defined viewing zone. In order to construct the designed viewing zones, we found the basic design conditions for a parallax barrier with a commercial LCD panel. As the viewing zones for two viewers are formed with only two view-point design, the interval between the center positions of each viewing zone and the width of each viewing zone are small compared to designed values. We analyzed the primary cases, introduced two modified design methods to enlarge the interval and the width of the viewing zones, and simulated their characteristics. As designed with six unit view-point and each viewing zone of each viewer is formed with a merged view-point, we found that adequate interval and width of viewing zones can be made, and we verified it in comparison with the tabletop display module that we fabricated.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.6
• /
• pp.4147-4157
• /
• 2015

The weapon system has developed by adding various functions because of the warfare change. And, an weapon system test set (WSTS) that is used to test and judge the condition of weapon system also deal with a lot of complex information. However, almost WSTS is developed on the basis of developer-centric. Because of it, it is hard to make a result by apprehending information on WSTS's display. Thus, I proposed a new display of WSTS by adapting the Ecological Interface Design(EID) Methodology to reduce operator's cognitive workload and assure safe testing. WSTS's Display is developed through Information Requirement and Work Domain Model as a result of Work Domain Analysis. The most powerful thing in the new display is that operator can identify his testing and status of WSTS directly. I expect that it reduces operator's cognitive workload and helps safe testing.

• Journal of the Semiconductor & Display Technology
• /
• v.21 no.1
• /
• pp.79-84
• /
• 2022

As various flexible display products are released, the demand for high-performance colorless and transparent polyimide (CPI) film is continuously increasing. The primary purpose of this study is to establish a systematic procedure for optimizing the optical performance of CPI films by applying the response surface method. After selecting three key factors (monomer type, stirring time for varnish synthesis, and maximum temperature of vacuum furnace for film production) affecting optical performance based on experiences and references, CPI films were manufactured according to the experimental sequence designed by the central composite design, and then the yellowness index (YI) and optical transmittance (Tr) of the films were measured. When producing a CPI film by pouring varnish into a petri dish, the change in optical properties according to thickness should be considered, and there was a meaningful linear relationship between YI and Tr. The species of monomer and the maximum temperature were the critical factors that had an influence on YI and Tr, respectively. It is expected that the procedure proposed in this study can serve as a starting point for CPI film optimization studies considering the other factors that were not considered and responses such as thermal properties.

• Korean Institute of Interior Design Journal
• /
• no.7
• /
• pp.45-49
• /
• 1996

The purpose for this study shows general planning direction about showroom which can enhance sales promotion, and corporate image and through buyer negotiation increasing export. We can divide showroom as promotional showroom and institutional showroom as a whole. The results of this research can be summarized as follows : There is no uniformed design plan of display for the P.R of showroom. And they need independent business space. But, there is no attractive factors to fascinate their consumer and thus there is no sufficient service facility, Also, some more effective planning is needed to support their supervisors. I wish to suggest some planning direction on the basis of research problems : We need to divide four space- that is entrance space, display space management space, service space-to allocative effectively space for the purpose of charging product. P.R. We should set up uniformed design policy which can contribute P.R.-that is corporate color, unform . logotype, sign, pamphlet etc.

• Science of Emotion and Sensibility
• /
• v.16 no.4
• /
• pp.567-578
• /
• 2013

The research is a correlational study to look for causes and factors relating to the design of written documents (professional reading materials) and identify those relationships that are useful for communication designers. The research specifically targeted the relationships between perception and reader's past experiences and appearance of the written documents. A preliminary survey, such as interviews, discussions, questionnaires and brainstorming sessions are conducted to establish the observable attributes related to perception which are reader's interests, importance of information and written documents complexity. Finally, the research used Structural Equation Model (SEM) to identify significant differences and analyze strong and weak correlations between these attributes. In general, the results of the study shows that the attribute appearances of a written documents with excellent visualizations for information display shows a strong correlation with interests while the attributes importance is weakly correlated with the complexity of the documents.

• Korean Institute of Interior Design Journal
• /
• v.25 no.4
• /
• pp.98-104
• /
• 2016

The study explores, by carrying out literature review (theoretical pursuit) and case analysis (practical works), the changed point of view on the European war memorial/museum, the revolution of museography and its paradigm, the case analysis of war memorial/museum in the paradigm shift, the new point of view and its role. Through the theoretical thinking and the case analysis, it concludes that the exhibition space of war memorial/museum, which is in the center of material culture, is turning into the venue of societal culture. Ultimately, it aims at indicating the necessity of the paradigm shift, and offering the exhibition design strategy and technique which can better display the objects - remains - of the terrible war and the importance of peace for the old generation and the future generation.

• Journal of the Semiconductor & Display Technology
• /
• v.7 no.4
• /
• pp.23-28
• /
• 2008

A high speed automated pitch variation unit (HAPU) related to semiconductor category sorting movement of the test handler system was developed. In the design process, 'DMADOV' step of 6-Sigma method has been applied. The design result for the desirable pitch variation was a 3:1 reduction rack-pinion and a linkage which are operated by servomotors. The realization and reliability of the mechanism was obtained at the design stage by FEM analysis, and by robust design using Taguchi orthogonal array against weight and deformation. Finally, the validity of the high speed variation mechanism was confirmed via inspection using a high speed camera while performing pitch variation.