• 제목/요약/키워드: Displacement damage effect

검색결과 163건 처리시간 0.023초

영상처리기법을 이용한 다중 변위응답 측정 알고리즘의 검증 (Verification of Multi-point Displacement Response Measurement Algorithm Using Image Processing Technique)

  • 김성완;김남식
    • 대한토목학회논문집
    • /
    • 제30권3A호
    • /
    • pp.297-307
    • /
    • 2010
  • 최근 토목, 건축 구조물의 유지관리 기술에 대한 관심이 커지고 있으며 구조물의 성능저하 및 노후화 등으로 구조적 안전성의 검토가 요구되는 구조물의 수가 급증하고 있는 실정이다. 그리고 구조물의 노후화 및 부재의 균열 등으로 인하여 강성이 저하되면 구조물의 동특성에 변화가 나타나게 되며 구조물의 실제 거동상태에서 동특성을 분석하여 손상부위와 손상정도를 정확히 판단하는 것은 중요한 문제이다. 구조물 모니터링에 사용되는 대표적 계측장비가 동적계측기이다. 기존의 동적계측기는 측정 센서와 장비를 연결하는 케이블 길이가 길어질 경우 신뢰할 수 있는 데이터를 얻기 힘들고 각 센서와 계측기를 1:1로 연결하는 방식을 취하고 있어 비경제적이다. 따라서 센서를 부착하지 않고 원거리에서 진동을 측정하는 방법이 필요하다. 구조물의 진동을 계측하기 위하여 적용 가능한 비접촉식 방법으로는 레이저의 도플러효과, GPS를 이용하는 방법 및 영상처리기법 등이 대표적이다. 레이저의 도플러효과를 이용하는 방법은 정확도가 상대적으로 높지만 비경제적이며, GPS를 이용하는 방법은 장비가 고가이고 신호 자체의 오차와 데이터 취득속도의 제약이 있는 단점이 있다. 그러나 영상신호를 이용하는 방법은 간편하고 경제적이며 접근이 어려운 구조물의 진동 및 동특성 추출에 적합하다. 기존에도 센서를 대신하여 카메라의 영상신호를 이용하는 연구가 수행되기도 하였으나, 기존의 방법은 구조물에 부착된 표적의 한 지점을 기록한 후 영상처리기법을 이용하여 진동을 측정하는 방법으로서 측정 대상이 비교적 국한적일 수 있다. 그러므로 본 연구에서는 영상처리기법을 이용하여 구조물의 다중 변위응답을 측정할 수 있는 방법의 타당성을 검증하기 위하여 진동대 실험 및 현장재하실험을 수행하였다.

Nanopharmaceutical Approach for Enhanced Anti-cancer Activity of Betulinic Acid in Lung-cancer Treatment via Activation of PARP: Interaction with DNA as a Target -Anti-cancer Potential of Nano-betulinic Acid in Lung Cancer-

  • Das, Jayeeta;Samadder, Asmita;Das, Sreemanti;Paul, Avijit;Khuda-Bukhsh, Anisur Rahman
    • 대한약침학회지
    • /
    • 제19권1호
    • /
    • pp.37-44
    • /
    • 2016
  • Objectives: This study examined the relative efficacies of a derivative of betulinic acid (dBA) and its poly (lactide-co-glycolide) (PLGA) nano-encapsulated form in A549 lung cancer cells in vivo and in co-mutagen [sodium arsenite (SA) + benzo[a]pyrene (BaP)]-induced lung cancer in mice in vivo. Methods: dBA was loaded with PLGA nanoparticles by using the standard solvent displacement method. The sizes and morphologies of nano-dBA (NdBA) were determined by using transmission electron microscopy (TEM), and their intracellular localization was verified by using confocal microscopy. The binding and interaction of NdBA with calf thymus deoxyribonucleic acid (CT-DNA) as a target were analyzed by using conventional circular dichroism (CD) and melting temperature (Tm) profile data. Apoptotic signalling cascades in vitro and in vivo were studied by using an enzyme-linked immunosorbent assay (ELISA); the ability of NdBA to cross the blood-brain barrier (BBB) was also examined. The stage of cell cycle arrest was confirmed by using a fluorescence-activated cell-sorting (FACS) data analysis. Results: The average size of the nanoparticles was ~ 110 nm. Confocal microscopy images confirmed the presence of NdBA in the cellular cytoplasm. The bio-physical properties of dBA and NdBA ascertained from the CD and the Tm profiles revealed that NdBA had greater interaction with the target DNA than dBA did. Both dBA and NdBA arrested cell proliferation at G0/G1, NdBA showing the greater effect. NdBA also induced a greater degree of cytotoxicity in A549 cells, but it had an insignificant cytotoxic effect in normal L6 cells. The results of flow cytometric, cytogenetial and histopathological studies in mice revealed that NdBA caused less nuclear condensation and DNA damage than dBA did. TEM images showed the presence of NdBA in brain samples of NdBA fed mice, indicating its ability to cross the BBB. Conclusion: Thus, compared to dBA, NdBA appears to have greater chemoprotective potential against lung cancer.

폭발하중 이력 특성에 따른 판 구조물의 동적응답 평가 - Part B: 고유주기에 따른 폭발하중 지속시간의 영향 분석 - (Dynamic Response of Plate Structure Subject to the Characteristics of Explosion Load Profiles - Part B: Analysis for the Effect of Explosion Loading Time According to the Natural Period for Target Structures -)

  • 강기엽;최광호;류용희;최재웅;이제명
    • 한국전산구조공학회논문집
    • /
    • 제28권2호
    • /
    • pp.197-205
    • /
    • 2015
  • 가스 생산용 해양플랜트 설비의 경우 폭발의 위험에 노출되어 있으며, 폭발사고는 구조물의 안전성에 치명적인 영향을 미칠 수 있다. 따라서, 이러한 폭발사고에 의한 피해를 최소화하기 위해서는, 폭발하중에 의한 구조부재의 동적응답 특성을 명확히 파악할 필요가 있다. 폭발하중의 경우 매우 짧은 시간 동안에 구조물에 가격되었다가 소멸되기 때문에 구조부재의 고유주기 및 폭발하중의 지속시간을 고려한 동적응답 평가가 필수적으로 요구된다. 일반적으로 가스 폭발하중의 경우, 부 압력단계가 전체 하중 이력에서 상당 부분 존재하며, 본 연구에서는 이러한 부 압력단계의 형상에 따라 총 하중 지속시간을 결정하는 하중 모델을 제안하였다. 방화벽은 폭발사고 시 장비 및 인명 피해를 방지하고자 FPSO 탑사이드 모듈 사이에 배치되는 구조부재이므로 폭발하중에 의한 응답이력 특성 분석이 반드시 필요하다. 때문에 무 감쇠 단 자유도 모델에 가스 폭발하중을 적용하여 변위응답 특성을 분석하였으며, 평판으로 구성된 방화벽의 FE 모델을 이용한 하중 지속시간과 구조부재들의 고유주기를 고려한 응답 특성을 분석하였다. LS-DYNA를 이용한 선형/비선형 구조해석 분석결과, 부 압력단계의 지속시간이 구조물의 동적응답에 큰 영향을 주는 것을 보였다.

원심모형실험을 이용한 내진 보강된 개착식 지하역사의 거동특성 연구 (Studies on Behavior Characteristics of Retrofitted Cut-and-Cover Underground Station Using Centrifuge Test Results)

  • 김진호;이나현;이후석
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제21권2호
    • /
    • pp.24-33
    • /
    • 2017
  • 국내 도시철도 지하역사는 주로 개착식 공법으로 건설되었으며, 1970~80년대에 건설된 지하역사는 내진설계가 반영되지 않았다. 한반도 뿐 만 아니라, 전 세계적으로 지진 발생빈도는 증가하고 있는 추세이며, 내진설계가 적용되지 않은 기존 지하역사에 지진이 발생될 경우 막대한 인명 및 재산피해가 우려된다. 본 연구에서는 내진보강이 된 지하역사의 지반-구조물 상호작용과 보강효과를 검토하기 위해, Kobe 지진파 및 Northridge 지진파를 1/60축소모형에 적용하여 원심모형실험을 수행하였다. 내진보강은 주 부재인 기둥, 측벽, 슬래브의 강성을 증가시켜 내진보강 전후를 비교 검토하였다. 현장 조건에 따른 모형 지반을 모사하기 위해 공진주시험을 통해 실제 깊이 및 밀도에 따른 전단파 속도의 변화를 모사하였다. 지반과 구조물은 비교적으로 유사한 거동을 하였으며, 지표면으로 가까워질수록 상대변위가 증가하였다. 또한, 내진 보강전후의 지하역사 구조물의 슬래브에 비해 기둥과 측벽에서 상대변위와 모멘트 구조 거동을 통해 내진 보강 효과를 확인할 수 있었으며, 단주기인 Northridge지진파에 비해 Kobe지진파에서 구조물의 변형이 크게 발생하는 것을 통해 지진파는 주요 설계인자임을 확인할 수 있었다.

사각단면 철근콘크리트 교각의 심부구속철근비 제안 (Suggestion for Confinement Steel Ratio of Rectangular RC Bridge Piers)

  • 박창규;정영수;윤상철
    • 콘크리트학회논문집
    • /
    • 제18권6호
    • /
    • pp.749-757
    • /
    • 2006
  • 최근 세계 도처에서 발생한 지진은 수많은 사상자를 발생시키었음은 물론 사회기간시설물에도 많은 피해를 주고 있다. 본 연구에서는 사각형 철근콘크리트 교각의 합리적인 심부구속철근비 산정식을 도출하기 위하여 내진성능에 영향을 미치는 주요 인자에 대하여 분석하였다. 본 연구에서 국내외 54개의 실험 결과를 분석한 결과 축하중비와 주철근비가 변위연성도에 큰 영향을 주는 주요 변수임을 확인하였으나, 이 변수들은 현 도로교설계기준의 심부구속철근비 산정식에는 고려가 되어있지 않고 있다. 따라서 이 실험 결과들을 이용하여 사각형 철근콘크리트 교각의 합리적인 심부구속철근비 산정식을 제안하였다. 본 연구에서 제안된 심부구속철근비 산정식은 기존 규정에 축하중비와 주철근비를 고려하였으며, 또한 낮은 축하중비에서 주철근 좌굴 방지를 위한 최소 규정을 도입하였다. 제안된 식은 일반적인 도로교상의 축하중비를 고려하면 기존 규정에 비해 매우 완화된 심부구속철근비를 갖게 된다. 따라서 문제로 나타나고 있는 시공성과 경제성이 상당히 향상될 수 있으리라 판단된다.

Semi-active storey isolation system employing MRE isolator with parameter identification based on NSGA-II with DCD

  • Gu, Xiaoyu;Yu, Yang;Li, Jianchun;Li, Yancheng;Alamdari, Mehrisadat Makki
    • Earthquakes and Structures
    • /
    • 제11권6호
    • /
    • pp.1101-1121
    • /
    • 2016
  • Base isolation, one of the popular seismic protection approaches proven to be effective in practical applications, has been widely applied worldwide during the past few decades. As the techniques mature, it has been recognised that, the biggest issue faced in base isolation technique is the challenge of great base displacement demand, which leads to the potential of overturning of the structure, instability and permanent damage of the isolators. Meanwhile, drain, ventilation and regular maintenance at the base isolation level are quite difficult and rather time- and fund- consuming, especially in the highly populated areas. To address these challenges, a number of efforts have been dedicated to propose new isolation systems, including segmental building, additional storey isolation (ASI) and mid-storey isolation system, etc. However, such techniques have their own flaws, among which whipping effect is the most obvious one. Moreover, due to their inherent passive nature, all these techniques, including traditional base isolation system, show incapability to cope with the unpredictable and diverse nature of earthquakes. The solution for the aforementioned challenge is to develop an innovative vibration isolation system to realise variable structural stiffness to maximise the adaptability and controllability of the system. Recently, advances on the development of an adaptive magneto-rheological elastomer (MRE) vibration isolator has enlightened the development of adaptive base isolation systems due to its ability to alter stiffness by changing applied electrical current. In this study, an innovative semi-active storey isolation system inserting such novel MRE isolators between each floor is proposed. The stiffness of each level in the proposed isolation system can thus be changed according to characteristics of the MRE isolators. Non-dominated sorting genetic algorithm type II (NSGA-II) with dynamic crowding distance (DCD) is utilised for the optimisation of the parameters at isolation level in the system. Extensive comparative simulation studies have been conducted using 5-storey benchmark model to evaluate the performance of the proposed isolation system under different earthquake excitations. Simulation results compare the seismic responses of bare building, building with passive controlled MRE base isolation system, building with passive-controlled MRE storey isolation system and building with optimised storey isolation system.

무수치 표백술 후 잔존 과산화수소수 제거를 위한 수종의 치수강 세척제의 효과에 관한 정량적 연구 (A QUANTITATIVE STUDY ON THE DEGRADING EFFECT OF THE VARIOUS IRRIGATING AGENTS IN THE ELIMINATION OF RESIDUAL HYDROGEN PEROXIDE FOLLOWING WALKING BLEACHING)

  • 금기연;한원섭;정일영;이승종;이찬영;오병훈
    • Restorative Dentistry and Endodontics
    • /
    • 제23권2호
    • /
    • pp.656-669
    • /
    • 1998
  • Hydrogen peroxide at high concentration during walking bleaching may cause damage to the tooth structure and to the surrounding periodontal tissues and may develop external root resorption. Clinically, It is so important to find a method of prevention or minimization of these complications. The efficacy of various chamber-irrigating agents to eliminate residual hydrogen peroxide after walking bleaching was examined and compared with water rinse in this study. Extracted human 46 premolars without any cementoenamel junction defects were treated endodontically and based with IRM to 1 mm below CEJ and totally bleached 3 times for each tooth with 30% hydrogen peroxide and sodium perborate. Upon completion of the 3rd walking bleaching procedure, the cervical portion and pulp chamber of each group of teeth were irrigated with catalase, 70% ethylalcohol, acetone, and distilled water. And then, a radicular hydrogen peroxide penetration was measured with spectrophotometer immediately after each bleaching and following treatment with each chamber-irrigating agents, and the significance of their eliminating efficacy of residual hydrogen peroxide was analyzed by Kruskal-Wallis test. The results were obtained as follows. 1. Cervical root penetration of hydrogen peroxide was increased as the bleaching procedure was repeated(P<.01). 2. The most effective irrigant that removed residual hydrogen peroxide was the catalase, and the least effective one was water rinsing (P<.01).; there was no significant difference between the acetone and ethanol group. 3. The Irrigation with antioxidant enzyme or water-displacement solutions can eliminate residual oxygen radicals from the pulp chamber effectively after walking bleaching. So, these agents can reduce adverse effects such as cervical external resorption and periapical inflammation and prevent residual $O_2$ from impeding composite resin polymerization, thus increase the bonding strength of composite resin. This, in turn reduces microleakage and discoloration of the esthetic restoration, extending its service-life.

  • PDF

머신러닝 기반의 실시간 자동화계측 데이터 분석 기법 연구 (A Study on Machine Learning-Based Real-Time Automated Measurement Data Analysis Techniques)

  • 최정열;한재민;안대희;정지승;김정호;이성진
    • 문화기술의 융합
    • /
    • 제9권1호
    • /
    • pp.685-690
    • /
    • 2023
  • 도시의 인구증가 및 고밀화에 따라 기존 지하구조물에 인접하여 대심도 굴착 공사 물량이 증가하는 추세인 것으로 분석되었다. 현재 지하구조물 및 궤도는 외부요인에 의해 지하구조물의 손상이 다수 발생되는 실정이며 터널 내의 계측결과로 원인을 분석하여 예방차원이 아닌 사후처리에 대해서 측정을 하고 있는 실정이다. 본 연구의 목적은 공용중인 도시철도 선로와 인접한 굴착공사에 따른 구조물의 변형에 미치는 영향을 분석하는 것이다. 또한 외적 요인으로 인해 지하구조물 및 궤도 손상 및 파괴가 발생하기 전 구조물의 변위를 머신러닝 기법을 통해 구조물의 안전성을 평가하고자 한다. 분석결과, 분석한 데이터세트에서 구조물관리기준치에 도달하는 시간을 예측하기에 적합한 모델은 다항회귀 머신러닝 알고리즘인 것으로 분석되었다. 그러나 본 연구에서 적용한 자동화계측 데이터에 한정될 수 있으므로 추가적으로 구조물 조건의 다양성과 데이터양을 늘리는 향후 연구가 필요하다.

충돌하중을 받는 이방향 비부착 프리스트레스트 콘크리트 패널부재의 충돌저항성능에 대한 실험적 거동 평가 (Experimental Evaluation of Bi-directionally Unbonded Prestressed Concrete Panel Impact-Resistance Behavior under Impact Loading)

  • 이나현;이상원;이승재;김장호
    • 콘크리트학회논문집
    • /
    • 제25권5호
    • /
    • pp.485-496
    • /
    • 2013
  • 2001년 9.11테러로 인한 미국 세계무역센터 및 미국 국방성 펜타곤이 붕괴된 이후, 전 세계적으로 충돌, 폭발 등의 극한하중에 의한 테러가 빈번하게 발생하고 있으며, 극한하중에 의한 구조물의 거동에 대한 사회적 불안감은 더욱 증가되고 있다. 그러나 지금까지의 사회기반시설구조물에는 폭발 및 충돌 등과 같은 극한하중에 대한 방호 및 방재개념을 설계에 고려하지 못하고 있는 실정이며, 원전격납건물, 가스탱크, 교량, 터널 등에 널리 사용되는 프리스트레스트 콘크리트 구조물에 대한 극한하중 연구는 전 세계적으로 미흡하다. 충돌과 같은 극한하중은 집약된 에너지의 급작스런 방출로 인한 높은 충돌압력을 형성하므로, 극한하중의 특성 및 전파 메커니즘을 이해하는 것이 필요하다. 그러므로 이 연구에서는 이방향 비부착 프리스트레스트 콘크리트 패널의 충돌저항성능을 비교검토하기 위하여, $1400mm{\times}1000mm{\times}300mm$의 철근콘크리트(RC), 프리스트레스 텐던으로만 보강된 콘크리트(PS), 프리스트레스 텐던과 철근으로 보강된 콘크리트(PSR, 일반적인 PSC) 시편을 제작하였다. 실험 조건에 맞춰 14 kN의 추를 10 m, 5 m, 4 m 높이에서 낙하하는 예비 실험과 3.5 m 높이의 본 실험으로 구성하여 충돌하중에 대한 프리스트레스트 콘크리트 구조물의 실험적 평가를 수행하였다. 또한, 충돌실험을 위한 기본적인 실험 구성 및 계측시스템을 구축하였다. 충돌 저항성능은 균열형상, 손상면적, 에너지 흡수, 처짐, 변형률, 가속도 등의 충돌에 의한 계측데이터를 이용한 거동분석 뿐만 아니라, 충돌 후 잔류구조성능 실험을 수행하여 이방향 비부착 프리스트레스트 콘크리트 패널의 충돌저항성능을 검토하였다. 본 실험은 향후 국내외 프리스트레스트 콘크리트에 대한 충돌 방호설계 및 충돌해석 등 관련 연구분야의 기초자료가 될 것이라고 판단되는 바이다.

섬유 보강재로 외부 보강된 강섬유 보강 콘크리트 슬래브의 충격저항성능 평가 (Evaluating Impact Resistance of Externally Strengthened Steel Fiber Reinforced Concrete Slab with Fiber Reinforced Polymers)

  • 류두열;민경환;이진영;윤영수
    • 콘크리트학회논문집
    • /
    • 제24권3호
    • /
    • pp.293-303
    • /
    • 2012
  • 최근 건설기술의 발전에 따라 구조물이 대형화, 고층화, 장대화되고 있으며, 동시에 다양한 기능을 수행하고 있다. 그러나 요즘 들어 그 빈도수가 증가하고 있는 충돌 사고나 테러에 의한 폭발, 화재 등에 의한 극한하중이 상기의 구조물에 작용할 경우, 구조물의 손상뿐만 아니라 인명과 재산의 피해 정도가 상당히 커질 수 있다. 특히, 충격이나 폭발하중은 구조물에 작용하는 압력 또는 하중이 매우 짧은 시간에 발생하게 되고, 이러한 하중을 받는 구조물은 준-정적(quasi-static) 하중을 받는 구조물과는 다른 응답을 나타내게 되며 반드시 변형률 속도와 손상 효과를 고려해서 설계가 이루어져야 한다. 그러므로 이 연구에서는 콘크리트 슬래브의 충격저항성능 향상을 위해서 강섬유를 전체 부피의 0%에서 1.5%까지 혼입하고, 두 가지 종류의 FRP 시트를 인장부에 보강하여 저속 충격하중에서의 휨 실험을 수행하였다. 실험 결과 FRP 시트를 인장부에 보강할 경우에 최대 충격하중 및 소산에너지, 파괴 시의 타격 횟수가 증가하였으며, 최대 처짐 및 회전각은 감소하여 충격저항성능이 크게 향상되는 것으로 나타났다. 이러한 결과는 추후 극한하중에 노출될 수 있는 주요 시설물의 설계 시 유용하게 사용될 수 있을 것으로 판단된다. 또한, 이 논문에서는 두 가지 종류의 FRP 시트로 보강된 강섬유 보강 콘크리트 슬래브의 저속 충격하중에서의 동적응답을 해석하기 위하여 외연적 시간적분에 기초한 유한요소해석 프로그램인 LS-DYNA를 사용하였으며, 해석 결과 오차율 5% 이내로 비교적 정확하게 최대 처짐을 예측하는 것으로 나타났다.