• 한국철도학회논문집
• /
• 제11권2호
• /
• pp.195-202
• /
• 2008

교량과 토공의 접속부은 궤도의 대표적인 취약구간으로서 교대배면의 부등침하로 인한 궤도틀림발생이 빈번하여 유지관리에 많은 어려움을 겪고 있는 구간 중의 하나이다. 콘크리트궤도부설구간의 경우에는 교대배면의 부등침하를 방지하기 위하여 접속슬래브 부설이 일반화되고 있는 추세이다. 이 경우, 접속슬래브를 지지하고 있는 노반의 침하로 인하여 접속슬래브에 경사처짐이 발생하게 되면 궤도도 경사처짐이 발생하게 된다. 이로 인해 이 구간을 통과하는 차량의 주행안정성과 승차감의 저하, 그리고 과도한 충격에 의한 궤도의 손상을 유발하게 되므로 접속슬래브의 단부에서의 침하를 제한할 필요가 있다. 따라서 본 연구에서는 콘크리트 궤도 부설 교량과 토공의 접속부에 부설되는 접속슬래브의 단부에서의 처짐한도를 알아보기 위하여 접속슬래브의 길이와 단부처짐량을 매개변수로 한 차량-궤도 상호작용 해석을 실시하여 차체가속도, 윤중변동률, 레일 저부응력, 그리고 체결구에 발생하는 상향압력을 조사하였으며, 수치해석결과와 각 검토항목별 허용한도와의 비교검토를 통하여 접속슬래브의 길이에 따른 단부처짐의 허용한도를 제시하였다.

• Geomechanics and Engineering
• /
• 제23권4호
• /
• pp.313-325
• /
• 2020

Slope displacement and factor of safety (FOS) of a slope are two aspects that reflect the stability of a slope. However, the traditional limit equilibrium (LE) methods only give the result of the slope FOS and cannot be used to solve for the slope displacement. Therefore, developing a LE method to obtain the results of the slope FOS and slope displacement has significance for engineering applications. Based on a force-displacement coupled mode, this work expands the LE Morgenstern-Price (M-P) method. Except for the mechanical equilibrium conditions of a sliding body adopted in the traditional M-P method, the present method introduces a nonlinear model of the shear stress and shear displacement. Moreover, the energy equation satisfied by a sliding body under a small slope displacement is also applied. Therefore, the double solutions of the slope FOS and horizontal slope displacement are established. Furthermore, the flow chart for the expanded LE M-P method is given. By comparisons and analyses of slope examples, the present method has close results with previous research and numerical simulation methods, thus verifying the feasibility of the present method. Thereafter, from the parametric analysis, the following conclusions are obtained: (1) the shear displacement parameters of the soil affect the horizontal slope displacement but have little effect on the slope FOS; and (2) the curves of the horizontal slope displacement vs. the minimum slope FOS could be fitted by a hyperbolic model, which would be beneficial to obtain the horizontal slope displacement for the slope in the critical state.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2007년도 정기총회 및 학술발표대회
• /
• pp.534-537
• /
• 2007

The soil nailing was generally using method in practical business, in application of the soil nailing, the analysis was primarily used to Beam-Colum Method, Finite Element Method and Limit Equilibrium Method. Beam-Colum Method and Finite Element Method were able to examine transformation but widely using Limit Equilibrium Method wasn't able to examine transformation and displacement Therefore, this study was focused on presenting stability in comparison with former study-results about horizontal displacement of the soil nailing retaining-walls satisfing a criterion safety factor of Limit Equilibrium. There were performing comparison field measurements and former study-results in first step.

• 한국공간구조학회논문집
• /
• 제6권3호
• /
• pp.87-92
• /
• 2006

This paper is a study on the experiment and elasto-plastic discrete limit analysis of reinforced concrete circular cylindrical shell by the rigid-bodies spring model. In the rigid bodies-spring model, each collapsed part or piece of structures at the limiting state of loading is assumed to behave like rigid bodies. The present author propose new discrete elements for elasto-plastic analysis of cylindrical shell structures, that is, a rectangular-shaped cylindrical element and a rhombus-shaped cylindrical element for the improvement and expansion of this rigid-bodies spring model. In this study, it is proposed how this rigid element-bodies spring model can be applied to the elasto-plastic discrete limit analysis of cylindrical shell structures. Some numerical results of elasto-plastic discrete limit analysis and experimental results such as the curve of load-displacement and the yielding and fracturing pattern of circular cylindrical shell under horizontal load are shown.

• 한국전산구조공학회논문집
• /
• 제32권5호
• /
• pp.305-311
• /
• 2019

본 연구에서는 국내에 새롭게 도입하고자 하는 인터모달 자동화물운송 시스템을 구현하기 위한 터미널 플랫폼 시설의 온도하중에 따른 적정 신축이음 간격을 살펴보았다. 터미널 플랫폼의 적정 신축이음 간격 검토는 미국 F.C.C.(federal construction council)에서 제안한 식을 이용하여 지역별 온도변화에 따른 최대 신축이음 간격을 설정하고, 구조해석 프로그램을 통해서 산출된 최대 변위값과 건축구조 수평변위 제한값을 비교하였다. 적정 신축이음 간격은 온도변화로 인한 구조물 최대 변위량이 수평변위 제한값 이하가 되는 슬래브 길이로 선정하였으며, F.C.C 제안식을 통하여 산정한 지역별 최대 신축이음 간격을 적용하여 구조물 최대 발생 변위를 살펴본 결과, 건축구조 수평변위 제한값 이내에서 발생될 수 있는 최대변위 값을 확인할 수 있었다.

• Structural Engineering and Mechanics
• /
• 제43권1호
• /
• pp.127-145
• /
• 2012

One of the most important and challenging steps in seismic vulnerability and performance assessment of highway bridges is the determination of the bridge component damage parameters and their corresponding limit states. These parameters are very essential for defining bridge damage state as well as determining the performance of highway bridges under a seismic event. Therefore, realistic damage limit states are required in the development of reliable fragility curves, which are employed in the seismic risk assessment packages for mitigation purposes. In this article, qualitative damage assessment criteria for ordinary highway bridges are taken into account considering the critical bridge components in terms of proper engineering demand parameters (EDPs). Seismic damage of bridges is strongly related to the deformation of bridge components as well as member internal forces imposed due to seismic actions. A simple approach is proposed for determining the acceptance criteria and damage limit states for use in seismic performance and vulnerability assessment of ordinary highway bridges in Turkey constructed after the 1990s. Physical damage of bridge components is represented by three damage limit states: serviceability, damage control, and collapse prevention. Inelastic deformation and shear force demand of the bent components (column and cap beam), and superstructure displacement are the most common causes for the seismic damage of the highway bridges. Each damage limit state is quantified with respect to the EDPs: i.e. curvature and shear force demand of RC bent components and superstructure relative displacement.

• 한국지반공학회논문집
• /
• 제36권11호
• /
• pp.51-60
• /
• 2020

횡방향의 토압에 저항하는 앵커블록, 흙막이 가설벽체, 레이커 지지블록 등에서 수동토압 산정은 중요한 요소이다. 실무에서는 사용의 편의성으로 인하여 파괴면을 직선으로 가정한 Coulomb과 Rankine의 이론을 사용하여 토압을 산정하는 것이 일반적이다. 하지만 실제 발생하는 수동파괴면은 벽면과 지반의 마찰로 인하여 벽체부근에서는 곡면이고 지표부근에서는 평면이 되는 복합파괴면을 형성한다. 흙막이 구조물의 안정검토에서 저항력으로 산정되는 수동토압이 발생되는 변위는 주동토압이 발생되는 주동변위 보다 커 대부분 구조물의 안정성을 초과하는 변위가 발생하여야 수동토압의 저항력이 발휘되므로 수동토압을 설계에 적용하기 위해서는 허용변위 이내의 임의변위에서 발휘되는 수동측토압의 산정이 매우 중요한 요소이다. 본 연구에서는 복합파괴면을 반영한 한계변위 내의 임의 변위에서 발휘되는 수동측토압을 산정할 수 있는 반경험식을 활용하여 벽체의 세 가지 거동조건에 따라 임의 변위에서 발휘되는 수동토압을 분석하였다.

• 한국지진공학회논문집
• /
• 제2권3호
• /
• pp.61-71
• /
• 1998

A performance-based seismic design method for reinforced concrete building structures being developed in Japan is outlined. Technical and scientific background of the performance-based design philosophy as well as recently developed seismic design guidelines are is presented, in which maximum displacement response to design earthquake motion is used as the limit-state design criteria. A method of estimating dynamic response displacement of the structures based on static nonlinear analysis is described. A theoretical estimation of nonlinear dynamic response considering the characteristics of energy input to the system is described in detail, which may be used as the standard method in the new performance-based code. A desing philosophy not only satisfying the criteria but also evaluating seismic capacity of the structures is also introduced.

• 대한기계학회논문집
• /
• 제19권2호
• /
• pp.402-407
• /
• 1995

The effects of room temperature and strain aging treatment are discussed on the critical condition for the onset of growth of non-propagating cracks on 0.15% C low carbon steel, with special emphasis on the length of the critical non-propagating crack and on the crack opening displacement(COD) at the crack tip. It is found from the experimental analysis that room temperature and strain aging of a fatigue pre-cracked specimen introduced the closure of a crack tip of the pre-crack and the reduction of crack opening displacement at the wake of crack, together with an improvement in crack growth resistance of the microstructure. This may cause an increase in the endurance limit of the specimen, through the enhancement of effective stress for the onset of growth of the critical non-propagating crack.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1995년도 Proceedings of the Korea Automation Control Conference, 10th (KACC); Seoul, Korea; 23-25 Oct. 1995
• /
• pp.170-173
• /
• 1995

Recently, we proposed a compact digital vibrometer using a self-mixing laser Doppler velocimeter (SM-LDV). In this paper, we theoretically obtained formulas giving lower and upper limit of measurable velocity. In the prototype digital vibrometer, the theoretical value was 6.7mm/s and 162.8mm/s, respectively, which agreed well with the measured value. The upper limit of measurable displacement amplitude was 12OO.mu.m at 10Hz, and 250.mu.m at 100Hz. Furthermore, the measurement accuracy the displacement amplitude was within -3% and average error -1.3%, when the shape of the sawtooth contained in the Doppler beat signal is clear and sharp. The measurement accuracy is found to depend on a degree of sawtooth asymmetry (DSA).