• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.10
• /
• pp.1535-1540
• /
• 2001

This study presents the possibility of scratch reduction on wafer in CMP by applying the ultrasonic and megasonic energy into the slurry which might contain large abrasive particles. Experiments were conducted to verify the dispersion ability of agglomerated particles by applying ultrasonic, megasonic waves and analyze the particle distribution of used slurry in case, of sonic energy assisted or none. And the dispersion stability of megasonic waves was investigated through the experiment of stability of the dispersed slurry, Finally, to confirm that the distribution of particles in slurry by ultrasonic waves was actually related to scratches on wafer when CMP was done, tungsten blanket wafer was processed, by CMP to compare and investigate scratches on wafer.

• 한국전산유체공학회:학술대회논문집
• /
• 2003.08a
• /
• pp.144-151
• /
• 2003

Computations of the mean and turbulence flows over three-dimensional hill of conical shape have implemented. Beside the standard $\kappa-\epsilon$, two other modifications proposed by Detering & Etling and Duynkerke for atmospheric applications were also considered. These predictions were compared with the data of a wind tunnel experiment. From the comparison, it was concluded that all three models predict the mean flow velocities equally well while only the Duynkerke's model accurately predicts the turbulence data statistics. It also concluded that there are large discrepancies between model predictions and the measurements near the ground surface. The flow field, which was obtained by using the Duynkerke's modification, was used to simulate gas dispersion from an upwind source. The calculation results are verified based on the measurement data. Modifications of the turbulent Schmidt number were carried out in order to match the measured results. The code was used to investigate the influence of the recirculation zone behind a building of cubical shape on the transport and dispersion of pollutant. For a stack behind and near the obstacle, some conclusions about the effect of the stack height and stack location were derive

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2011.05a
• /
• pp.58-58
• /
• 2011

Nickel-ceramics nanocomposite coatings can be applied as the wear resistance coating, corrosion protection of underlying materials, and decorative coatings. Hence, Nickel based nanocomposite coatings, especially Ni-SiC, have been extensively studied in recent years. However, more often agglomeration problem of the nanoparticles in the nickel matrix can cause deterioration of the mechanical properties rather than improvement. The homogeneous distribution of the nanoparticles in the matrix coating is still being challenging. In this experiment, electrochemical deposition of Ni-SiC composite coating was done in presence of ultrasound. The effects of different ultrasonic powers and frequencies on the nanoparticle dispersion were studied. The electrodeposition was carried out in nickel sulfamate bath by applying pulse current technique. Compared to the conventional mechanical stirring technique to prevent nanoparticles agglomeration and sedimentation during composite electrodeposition, the aid of ultrasonic dispersion along with mechanical stirring has been found to be more effective not only for the nanoparticles dispersion, but also for the mechanical properties of the electrodeposited coatings. Nanoparticles were found to be distributed homogeneously with reduced agglomeration. The microstructure of the composite coating has also been changed, allowing some random orientations of the nickel crystallite grain growths, smooth surface, and finer grains. As a consequence, better mechanical properties of the composites were observed.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.20 no.44
• /
• pp.207-215
• /
• 1997

This paper deals with a comparison between Taguchi's accumulation analysis method and Nair test on the ordered categorical data from an industrial experiment for quality improvement. a result of Taguchi's accumulation analysis method is shown to have reasonable power for detecting location effects, while Nair test identifies the location and dispersion effects separately, Accordingly, Taguchi's accumulation analysis needs to develop methods for detecting dispersion effects as well as location effects. In addition this paper rewmmends models for analyzing ordered categorical data, for examples, the cumulative legit model, mean response model etc Successively simple, reasonable methods should be introduced more likely to be used by the practitioners.

• Journal of the korean society of oceanography
• /
• v.34 no.4
• /
• pp.185-199
• /
• 1999

With a realistic geography and topography the Princeton Ocean Model is used to study the effects of topography, wind and time-varying Chanajiang (Yangtze) River discharge on the dispersion of the Chanaiiang River plume in the Yellow and East China Seas. The topographic feature of deepening offshore suppresses the offshore expansion of the discharged low salinity water while spreading along the coast is not hindered. Also the spreading of the Chanajiang River plume is very sensitive to wind conditions and the southerly wind is most responsible for the eastward expansion toward the Cheju Island. It is also shown that the influence of the Chanajiang River Diluted Water on the hydrography and circulation of the Yellow Sea including the South Sea of Korea is substantial even in the absence of tide, wind and current.

• Journal of Advanced Marine Engineering and Technology
• /
• v.8 no.2
• /
• pp.88-97
• /
• 1984

The combustion process and the performance of a diesel engine are considerably affected by the characteristics of fuel spray. It is known that the spray of swirl nozzle for diesel engine injector of small orifice ratio becomes soft spray that has no core, therefore its penetration, one of the characteristics of spray becomes werse inspite of its good dispersion. In this paper, the spray characteristics of variously designed swirl nozzle for diesel injector were investigated by the photographic method. The nozzles, used in this experiment, vary in the diameter of swirl chambers and orifice ratio. From the results of the study, the sprays of this type nozzle of optimum swirl chamber and orifice ratio show that penetration decreased slightly but dispersion and spray volume increased remarcably, compared with unswirled single hole nozzle of the same size. It was suggested as a reason for the results, that the spray of this type swirl nozzle is similar to hard spray, therefore the core of the spray sustains good penetration considerably.

• Water for future
• /
• v.23 no.2
• /
• pp.213-225
• /
• 1990

A mathematical model is presented for predicting the steady state two-demensional distribution of solute concentration in the meandering nonuniform natural channel. The dispersion equation derived herein employs the transverse cumulative discharge as an independent variable replacing the transverse distance and that it is developed in an orthogonal curvilinear coordinnate system which follows the flow direction of natural channel. The prediction from the results of numerical model are compared with laboratory experiment data. It is found that results from simulation and experiments are in good agreement.

• The Korean Journal of Applied Statistics
• /
• v.6 no.2
• /
• pp.253-263
• /
• 1993

Recent interest in Taguchi's methods have led to developments of joint modelling of the mean and dispersion in generalized linear models. Since a single data transformation cannot produce all the necessary conditions for an analysis, for the analysis of the Taguchi data, the use of the generalized linear models is preferred to a commonly used data transformation method. In this paper, we will illustrate this point and provide GLIM macros to implement the joint modelling of the mean and dispersion in generalized linear models.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.20 no.1
• /
• pp.83-87
• /
• 2006

The oriental medicine is necessary to the development of oriental medicine diagnosis, to satisfy the Senior-Friendly. We experiment on the elderly women in 3-D mac, and carry into effect the comparative-study on the youth's pulsation. The elder pulsation's division factor are analyzed press power, w/t, h5/h1 , dispersion of period. In the press power, the elder pulsation is shallow compared with the youth's pulsation. In the w/t (pressurization time / pulsation cycle), the elder pulsation is longer compared with the youth's pulsation, In the h5/h1 (dicrotic / main peak), the elder pulsation is small compared with the youth's pulsation. In the range of dispersion of period, the elder pulsation is narrow-changed compared with the youth's pulsation. Therefore the elder pulsation is characterized by the deficiency of flexibility and injection power.

• Korean Journal of Soil Science and Fertilizer
• /
• v.13 no.2
• /
• pp.65-70
• /
• 1980

This experiment was aimed at selecting the most suitable dispersing agent to the Korean soils. The particle size distribution of 18 soil samples representing the great soil groups in Korea was analysed with 5 different dispersing agents by pipette-method. Passing percent of 0.05, 0.02 and 0.002mm in diameter was used for the comparision of the dispersion capacity of chemical agents. The results obtained are as follows; 1. The influence of chemical agents on dispersion seemed to be greater to finer soil particles. The passing percents of 0.002mm showed a great differences according to the chemical agents used, while little differences was observed in those of 0.05mm. 2. It was showed that sodium pyrophosphate had the highest dispersion capacity for the most of Korean soils, the dispersion capacity of sodium hexametaphosphate was also high enough except for volcanic ash soils. 3. It was recommendable that sodium hexametaphosphate could widely be used as a dispersing agent in the routine analysis of soil particle size distribution except for the Volcanic ash soils. 4. The dispersion of Volcanic ash soils was rather poor when chemical agents used. Therefore, special care should be taken for the dispersion of allophane soils.