• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.8
• /
• pp.79-86
• /
• 1999

A simulation of 10 Gbps optical fiber transmission system using DCf(dispersion compensating fiber) for the dispersion compensation is performed. In order to analyze the NRZ pulse propagation in nonlinear, dispersive and lossy fiber, the split-step finite element method that is combination of finite element method and finite difference method is used. Also, we obtained the optical eye diagram and BER characteristics at the receiver of the system that is contained the optical amplifier and system noises. As a result of simulation, we obtain that the dispersion penalty is about 0.8dB after 50km transmission and the receiver sensitivities at $10^{-9}$ BER are -27.4dBm with EDFA pre-amplifier of 12dB gain and -15.6dBm without EDFA.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.7 no.2
• /
• pp.13-20
• /
• 1970

The dispersion characteristics of tape meander line were analyzed by electromagnetic field theory. The several different tape meander lines were photoetched on copper printed-bakelit substrate, and these tape meander line structures were inserted into the X-band waveguide. Phase bridge method was used for the dispersion characteristics measurement of meanderline. The measured. results were plotted on diagram(Brillouin diagram) and compared with theoretical values. Measured results were consistent with theoretical Values. But, on the measured diagram, passband midfrequency was lower than theoretical value. It was believed that the discrepancy was due to the backelite loading. The group velocity of stagger tuned meander line was higher than that of uniform meander live, and the freqnency band of constant group velocity of stagger tuned meanderline was sider than that of uniform meander line.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.8
• /
• pp.575-582
• /
• 2015

This paper deals with the dispersion relation of the waves sustained in a cylindrical shell submerged in the fluid. The waveguide finite method and the boundary element method are used to predict the dispersion characteristic of the cylindrical shell. The dispersion diagram of the cylinder is estimated from the eigenvalue problem and the forced vibration response. It follows that the water-loading leads to the decrease of the cut-on frequencies and the phase speeds of the bending waves. On the contrary, the longitudinal waves and the torsional waves are hardly affected by the fluid, and therefore the order of the cut-on frequencies of the waves is changed. The acoustic dispersion diagram is also estimated from the forced acoustic response to identify the characteristics of the wave radiated to the fluid. It follows that the acoustic waves on and near the surface of the cylinder are the same as those in the structure. But at the far field the acoustic waves caused by subsonic waves e.g., the bending waves disappear as the increase of the distance. Conclusively, the characteristics of waves in cylindrical shells are significantly affected by water-loading in terms of the cut-on frequency, the wave speed, the order of the cut-on and radiation.

• IE interfaces
• /
• v.18 no.4
• /
• pp.465-476
• /
• 2005

Evolutionary operation is a useful tool for improving full-scale manufacturing process by systematically changing the levels of the process variables without jeopardizing the product. This paper presents a system design for the evolutionary operation software called 'evolutionary optimizer'. Evolutionary optimizer consists of four modules: factorial design, many variables, mixture, and mean/dispersion. Context diagram, data flow diagram and entity-relationship modelling are used to systematically design the evolutionary optimizer system.

• International journal of advanced smart convergence
• /
• v.1 no.2
• /
• pp.43-46
• /
• 2012

We analyzed a periodic thick mushroom structure for use as an artificial magnetic conductor using mode-matching method. The fields in each region were represented by either Floquet modes or waveguide modes. By applying tangential electric and magnetic field continuity conditions and using matrix equations, unknown coefficients and dispersion diagram were calculated. The proposed model can account for the effects of oblique incidence. Simulation time using the method was much faster than the commercial tools. We found that the current method produces accurate results of reflection phase and dispersion diagram.

• Structural Engineering and Mechanics
• /
• v.67 no.2
• /
• pp.175-183
• /
• 2018

This research deals with the wave dispersion analysis of functionally graded double-layered nanobeam systems (FG-DNBSs) considering the piezoelectric effect based on nonlocal strain gradient theory. The nanobeam is modeled via Euler-Bernoulli beam theory. Material properties are considered to change gradually along the nanobeams' thickness on the basis of the rule of mixture. By implementing a Hamiltonian approach, the Euler-Lagrange equations of piezoelectric FG-DNBSs are obtained. Furthermore, applying an analytical solution, the dispersion relations of smart FG-DNBSs are derived by solving an eigenvalue problem. The effects of various parameters such as nonlocality, length scale parameter, interlayer stiffness, applied electric voltage, relative motions and gradient index on the wave dispersion characteristics of nanoscale beam have been investigated. Also, validity of reported results is proven in the framework of a diagram showing the convergence of this model's curve with that of a previous published attempt.

• The Bulletin of The Korean Astronomical Society
• /
• v.43 no.2
• /
• pp.34.1-34.1
• /
• 2018

We investigate the properties of bright galaxies with various morphological types in Abell 1139 and Abell 2589, using the pixel color-magnitude diagram (pCMD) analysis. The 32 bright member galaxies ($Mr{\leq}-21.3mag$) are deeply imaged in the g and r bands in our CFHT/MegaCam observations, as a part of the KASI-Yonsei Deep Imaging Survey of Clusters (KYDISC). We examine how the features of their pCMDs depend on galaxy morphology and infrared color. We find that the g - r color dispersion as a function of surface brightness (${\mu}r$) shows better performance in distinguishing galaxy morphology, than the mean g - r color does. The best set of parameters for galaxy classification appears to be a combination of the minimum color dispersion at ${\mu}r{\leq}21.2mag\;arcsec-2$ and the maximum color dispersion at $20.0{\leq}{\mu}r{\leq}21.0mag\;arcsec-2$: the latter reflects the complexity of stellar populations at the disk component in a typical spiral galaxy. Moreover, the color dispersion of an elliptical galaxy appears to be correlated with its WISE infrared color ([4.6]-[12]). This indicates that the complexity of stellar populations in an elliptical galaxy is related to its recent star formation activities. From this observational evidence, we infer that gas-rich minor mergers or gas interactions may have usually occurred during the recent growth of massive elliptical galaxies.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.1
• /
• pp.44-52
• /
• 2014

In this study, the influence of the near field, far field and radiation directivity of microstrip patch antenna when is used mushroom EBG(Electromagnetic Band Gap) as ground is investigated. Using characteristic of dispersion diagram of mushroom EBG, we calculated forbidden band(2.36GHz-2.85GHz) given mushroom type EBG microstrip antenna(2.45GHz) having 2-layer EBG that is operating within forbidden band. In oder to conform performance enhancemen of antenna using EBG ground, we have compared with the antenna using PEC(Perfect Electric Conductor) ground. We could know about 2.74dB increment of the radiation directivity, because EBG can suppress surface wave that is generated at interfaces of the dielectrics-conductor.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.12
• /
• pp.6022-6026
• /
• 2012

This article presents a band-stop filter (BSF) by using a periodic structure property of frequency selective surfaces (FSSs) embedded in a microstrip transmission line. The proposed BSF is designed with FSS unit cells modifying the cross-loop slots. The BSF is interpreted with an equivalent circuit model and a dispersion diagram. The center frequency (fo) of the BSF is 6.6GHz. Proposed filter increases the number of unit cell. As a result, 3dB bandwidth is wider and insertion loss is reduced. Also, Facbricated BSF exhibits uniplanar geometry, simple fabrication.

• Korean Journal of Optics and Photonics
• /
• v.19 no.1
• /
• pp.48-53
• /
• 2008

We propose an optical configuration to compensate dispersion characteristics in the dark state of normally black twisted nematic (NB-TN) liquid crystal display (LCD). We employed a half-wave plate (HWP) and a +A plate to achieve the superior dark state. By using the parameter space diagram (PSD) method, we could obtain the optimum values of parameters and the high contrast-ratio over 500 : 1 could be obtained. Furthermore, excellent dispersion characteristics were also obtained in the bright state. We could confirm the performance of the proposed structure using both the numerical calculations and the experiments.