• 한국항해항만학회지
• /
• 제41권5호
• /
• pp.345-352
• /
• 2017

Recently, a new port reserves deep water depth for safe navigation and mooring, following the trend of larger ship building. Larger port facilities include long and huge breakwaters, and mainly adopt vertical type considering low construction cost. A vertical breakwater creates stem waves combining inclined incident waves and reflected waves, and this causes maneuvering difficulty to the passing vessels, and erosion of shoreline with additional damages to berthing facilities. Thus, in this study, the researchers have investigated the response of stem waves at the vertical breakwater near the entrance channel and applied numerical models, which are commonly used for the analysis of wave response at the harbor design. The basic equation composing models here adopted both the linear parabolic approximation adding the nonlinear dispersion relationship and nonlinear parabolic approximation adding a linear dispersion relationship. To analyze the applicability of both models, the research compared the numerical results with the existing hydraulic model results. The gap of serial breakwaters and aligned angles caused more complicated stem wave generation and secondary stem wave was found through the breakwater gap. Those analyzed results should be applied to ship handling simulation studies at the approaching channels, along with the mooring test.

• 펄프종이기술
• /
• 제39권1호
• /
• pp.25-29
• /
• 2007

Print mottle is the spotty and cloudy appearance of the ink on the substrate. Print mottle is influenced significantly by the characteristics of the paper with regard to homogeneity of its structure and its coating. The print mottle can be counteracted, in particular by altering the absorption characteristics of the inks, by changing sequence in which the inks are printed, or by using a advanced coated paper. In this study, we investigated the effect of ink dispersion to the print mottle through trial printing test and also analyzed the correlation between properties of coated paper and subjective results by statistic method. The result of this study is expected to be applied the basic data to solve the problem of printing mottle.

• Wind and Structures
• /
• 제27권6호
• /
• pp.417-430
• /
• 2018

The concentration fields in the proximities of a local gas emission source are experimentally analyzed in several combinations of wind incidences and source emissions. These conditions are determined by the plume buoyancy, emission velocity and incident flow wind speed. Concentration measurements are performed by an aspirating probe in a boundary layer wind tunnel. The analysis included the mean concentration values and the intensity of concentration fluctuations in a neutral atmospheric boundary layer flow. Different configurations are tested: an isolated stack in a homogeneous terrain and a stack with a bluff body in close proximity, located windward and leeward from the emission source. The experimental mean concentration values are contrasted with Gaussian profiles and the dilution factor is analyzed with respect to the empirical curves of the minimum dilution. Finally, a study on the plume intermittency is performed in a cross-sectional plane near the emission source. It is possible to highlight the following observations: a) plume vertical asymmetry in the case of an isolated emission source, b) significant differences in the dispersion process related to the relative location of the emission source and bluff body effects, and c) different probabilistic behavior of the concentration fluctuation data in a cross-sectional measurement plane inside the plume.

• 천문학회보
• /
• 제44권1호
• /
• pp.74.2-74.2
• /
• 2019

Mass measurement of high-redshift galaxy clusters with high accuracy is important in constraining cosmological parameters. Extremely massive clusters at high redshift may impose a serious tension with the current ΛCDM paradigm. SPT-CL J2040-4451 at z=1.48 is considered one such case given its redshift and mass estimate inferred from the SZ data. The system has also been confirmed to be indeed massive from a recent weak-lensing (WL) analysis. Comparison of the WL mass with the spectroscopic result may provide invaluable information on the dynamical stage of the system. However, the existing spectroscopic coverage of the cluster is extremely poor; only 6 blue star-forming galaxies have been found within the virial radius, which results in highly inflated and biased velocity dispersion. In this work, we present a spectroscopic analysis of the member candidates using Gemini Multi-Object Spectrographs (GMOS) observation in Gemini South. The observation was designed to find early-type member galaxies within the virial radius and to obtain reliable velocity dispersion. We explain our selection scheme and preliminary results of the spectra. We also compare the dynamical mass estimate inferred from the velocity dispersion with the WL mass.

• 한국산업보건학회지
• /
• 제33권3호
• /
• pp.346-354
• /
• 2023

Objectives: Chemical accidents cause extensive human and environmental damage. Therefore, it is important to prepare measures to prevent their recurrence and minimize future damage through accident investigation. To this end, it is necessary to identify the accident occurrence process and analyze the extent of damage. In this study, the development process and damage range of actual chemical leakage accidents were analyzed using CFD. Methods: For application to actual chemical leakage accidents using FLACS codes specialized for chemical dispersion simulation among CFD codes, release rate calculation and 3D geometry were created, and scenarios for simulation were derived. Results: The development process of the accident and the dispersion behavior of materials were analyzed considering the influencing factors at the time of the accident. In addition, to confirm the validity of the results, we compared the results of the actual damage impact investigation and the simulation analysis results. As a result, both showed similar damage impact ranges. Conclusions: The FLACS code allows the detailed analysis of the simulated dispersion process and concentration of substances similar to real ones. Therefore, it is judged that the analysis method using CFD simulation can be usefully applied as a chemical accident investigation technique.

• 하천과문화
• /
• 제9권4호
• /
• pp.70-73
• /
• 2013

• 전자공학회지
• /
• 제29권4호
• /
• pp.98-98
• /
• 2002

• 대한가정학회지
• /
• 제35권5호
• /
• pp.177-194
• /
• 1997

This study attempts to explore urban married women's needs for consumer information contents. In addition, the causality of the needs for consummer information contents and related variables is investigated. Major findings are the following: (1) Respondents' need for information on“the product selection”and “the use and management”of the washing maching or hair dryer is high, while the in need for the information on“the existing brands”is very low. (2) Among several relevent characteristics, respondents' product involvement is strongly related to the needs for consumer information contents. (3) The results of the analysis of casual model from washing maching showed that respondents' age, purchasing experience, perception of the price dispersion and quality difference, self confidence in the product evaluation affect on the need for consumer information contents directly. While respondents' income and education level show a indirect effect. (4) The results of the analysis of causal model from hair dryer showed that respondents' perception of the price dispersion, quality difference and product complexity affect on the need for consumer information contents directly. While respondents' age, purchasing experience, self-confidence in the product evaluation show a indirect effects.

• 한국수자원학회논문집
• /
• 제31권1호
• /
• pp.115-120
• /
• 1998

본 논문에서는 수심적분 2차원 모형을 하나 소개하고, 이 모형이 가질 수 있는 오차의 한계를 민감도분석을 통해 제시하였다. 민감도 분석 결과, Manning 조도계수, 혼합계수, 침강속도, 한계전단력 등이 부유사농도에 대해 모형에 미치는 영향은 매우 크게 나타났으며, 조위와 확산계수의 영향은 거의 없는 것으로 나타났다.

• 한국환경과학회지
• /
• 제14권6호
• /
• pp.577-582
• /
• 2005

Enormous apartment complexes in urban areas, temporary inversion state and heat island effect occur due to the strong sunshine and weak wind speeds which hinders the dispersion of air pollutants that are emitted from neighboring areas of apartment complexes. In this study, analysis were conducted by using the Fluent code based on the CFD(Computation Fluid Dynamics), including building layout, material, building height from the ground surface, the heat, analysis of flow field in the apartment complex. It was estimated that the temporal radiation inversion phenomenon during the daytime, which was caused by the weak wind speed and higher temperatures in the upper level, contributed to the stagnation of the air pollutants in the lower layer of the apartment complex.