• Journal of the Korean Geographical Society
• /
• v.30 no.2
• /
• pp.146-168
• /
• 1995

problems involved in defining and identifying it. However, data on ownership of business establishments may be useful and one of the best alternatives for this empirical research because of use of limited information about control This study examines the spatial patterns of external control in the Korean manufacturing activities between 1986 and 1992. Using the data on ownership iinkages of multilocational firms between 15 administrative areas, it was possible to construct a matrix of organizational control in terms of the number of establishments. The control matrix was disaggregated by three types of manufacturing industries according to the capital and labor requirements of production processes used in. On the basis of the disaggregated control matrix, a series of measures were calculated for investigating the magnitude and direction of control as well as the external dependency. In the past decades Korean industrialization development has risen at a rapid pace, deepening integration into the world economy, together with the continuing growth of the large industrial firms. The expanded scale of large firms led to a spatial separation of production from control, Increasing branch plants in the nation. But recent important changes have occurred in the spatial organization of production by technological development, increasing international competition, and changing local labor markets. These changes have forced firms to reorganize their production structures, resulting in changes of the organizational structures in certain industries and regions. In this context the empirical analysis revealed the following principal trends. In general term, the geography of corporate control in Korea is marked by a twofold pattern of concentration and dispersion. The dominance of Seoul as a major command and control center has been evident over the period, though its overall share of allexternally controlled establishments has decreased from 88% to 79%. And the substantial amount of external control from Seoul has concentrated to the Kyongki and Southeast regions which are well-developed industrial areas. But Seoul's corporate ownership links tend to streteh across the country to the less-developed regions, most of which have shown a significant increase of external dependency during the period 1986-1992. At the same time, a geographic dispersion of corporate control is taking place as Kyongki province and Pusan are developing as new increasingly important command and control reaions. Though these two resions contain a number of branch plants controlled from other locations, they may be increasingly attractive as a headquarters location with increasing locally owned establishments. The geographical patterns of external control observable in each of three types of manufacturing industries were examined in order to distinguish the changing spatial structures of organizational control with respect to the characteristics of the production processes. Labor intensive manufacturing with unskilled iabor experienced the strongest external pressure from foreign competition and a lack of low cost labor. The high pressure expected not only to disinte-grate the production process but also led to location of production facilities in areas of cheap labor. The linkages of control between Seoul and the less-developed regions have slightly increased, while the external dependency of the industrialized regions might be reduced from the tendency of organizational disintegration. Capita1 intensive manufacturing operates under high entry and exit barriers due to capital intensity. The need to increase scale economies ied to an even stronger economic and spatial oncentration of control. The strong geographical oncentration of control might be influenced by orporate and organizational scale economies rather than by locational advantages. Other sectors experience with respect to branch plants of multilocational firms. The policy implications of the increase of external dependency in less-developed regions may be negative because of the very share of unskilled workers and lack of autonomy in decision making. The strong growth of the national economy and a scarcity of labor in core areas have been important factors in this regional decentralization of industries to less-developed regions. But the rather gloomy prospects of the economic growth in the near future could prevent the further industrialization of less-developed areas. A major rethinking of regional policy would have to take place towards a need for a regional policy actively favoring indigenous establishments.

• Journal of the Korean Geographical Society
• /
• v.30 no.1
• /
• pp.35-56
• /
• 1995

During the last two decades, Korea has achieved remarkable economic growth. In this process the nation has become urbanized and industrialized. But we have also encountered widening regional disparity, housing shortage of larger cities, transportation congestion, environmental pollution and many other problems. Rapid increasing urbanization and continuous migration toward Seoul since the late 1960s have been one of the major concerns of government. Government has sought ways to moderate the population increase in Seoul. The regulation which include new town development near Seoul and dispersion strategies of higher education and other administration and living facilities outside of Seoul havemade a great expansion of the spatial influence of Seoul city. Seoul metropolitan reaion has evolved as the most powerful center of political and economical spaces. Generally within a metropolitan region, there exists a growing mutual interdependence economically, as well as socially between a central city and its surrounding area. Seoul metropolitan region manifests itself not only as a coherent system of urbanized regions, but also as an integral part of the daily urban system. The surrounding Gyunggi province and Seoul city become closely linked both economically and functionally, constituting true functlonai urban system. This study is primarily undertaken with the purpose of delineation of the sphere of influence of Seoul city in 1990. At the time of 1985, Seoul metropolitan region was delineated according to the result of the study which was performed by Korea Research Institute for Human Settlements. Afterward, the rapid speed of metropolitanization process with dramatic increase in mobility through the provision of wider transportation system across the Capital region have evolved, resulting in the great expansion of the spatial influence of Seoul city. So this study examines the expanded area of Seoul metropolitan regin during the period of 1985-90. In order to delineate Seoul metropolitan region, the indices of urbanization and functional linkage are selected. Variables included in the measurement of the urbanization level are agricultural structure, population characteristics, manufacturing and service industries, and cultural aspects such as newspaper circulation, the ratio of car ownership and piped water supply. Variables included in the measurement of functional linkage are commuting, shopping pattern, centralized service such as medical facilities and trade of agricultural products. The standardization method and factor analysis are employed in making the delineation of Seoul metropolitan region. According to the result of this study, 2 cities, 8 Eups and 46 Myuns are included Seoul metropolitan region in 1990. If we compare this delineated area in 1990 to that of 1985, we can find the distinctive pattern of expanded axes according to the main transportation routes such as Seoul-Suweon, Seoul-Gwangju, Seoul-Incheon. In 199O, all the Gyunggi province, except a few Myuns located at the north and northwest part of Gyunggi province, are included in Seoul metropolitan region. Furthermore, this study attempts to the analysis of regional structure of Seoul metropolitan region according to the functional characteristics of each city and Gun. Variables included in this analysis are the new residential function, manufacturing function, service function, education and infermation function, public facility function and agricultural function. Factor analysis and cluster analysis are employed in making regionalization. Seoul metropolitan reaion is subdivided into four subregions which reflect different functional specialization. The first group is the specialized region of newly formed residential function. The second group is the specialized reaion of manufacturing function. The third group is the specialized region of service function. And the fourth group has little specialized in terms of manufacturing, service, and residential function. But this region has some potentiality of development when Seoul metropolitan region grow continuously. Seoul metropolitan region accounted for 43% of national population, despite 11.8% of national land size in 1990. Although Seoul metropolitan region enjoys important agglomeration economies, it also has huge social cost in the form of transportation congestion, housing shortage, rapid increase of land value, environment pollution, and etc. Efficient metropolitan plan making is a vital element in promoting Seoul's economic development and providing high quality living environment at low cost. In the light of the result of this study, the outer ring of Seoul metropolitan region, especially northeastern part, are underdeveloped compared to overdeveloped southwestern area. It is needed to develop the guidelines for the implement of the growth control and management plan, inducing more balanced development for whole Seoul metropolitan reaion.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2001.04a
• /
• pp.98-103
• /
• 2001

In order to understand the characteristics of leachate at the Seokdae municipal waste landfill in the Pusan city, the correlation between leachate pollution loading and volume of gas production. concentration of gas and subsidence of ground, the characteristical methos, geochemical analyses and laboratory column tests using samples of gases, leachate and surface soil of Seokdae waste landfill area. Through the analysis of water balance, leachate flow rate and pollution loading were estimated. Geistatistical analysis of four gas components ( $O_2$, C $H_4$, $H_2$S and CO) shows the possibility of ground subsidence around the group of a site with high concentration of gas. From geochemical analyses of leachate, EC and Total-Alkalinity of ground subsidence around the group of a site with high concentration of gas. From geochemical analysis of leachate, Ec and Total-Alkalinity were increased, and Cl, Cr, Mn, Cu, Zn, Cd and Pb were decreassed comparing to the part, and the type of water quality was Na-HC $O_3$ in trilinear diagram. It shows that biodecomposition of municipal wastes continues actively. From the analysis of water balance, the total leachate flow rate is about 465.11㎥/day and pure pollution loading of Cl, Mn and Fe are estimated to 223.8kg/day, 0.2kg/day, 0.3kg/day, respectively. The laboratory column test of residual soil and landfill soil shows 0.206cm and 0.019cm for linear velocity(equation omitted), 0.234 $\textrm{cm}^2$/min and 0.018$\textrm{cm}^2$/min for diffusion coefficient ( $D_{ι}$), and 1.136cm and 0.095cm longitudinal dispersion index ($\alpha$$_{ι}$), respective]y. It demonstrates that the delay time of contamination for residual soil is shorter than that of landfill soil.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.15 no.2
• /
• pp.71-85
• /
• 2012

The purpose of this study is to estimate air purification effectiveness considering the improvement of its methods related atmospheric environment. The air purification effectiveness is estimated in Daegu, one out of Korean Metropolitan cities because air pollution is getting serious in a heavily urbanized area. The absorption of pollutants is calculated by considering spatial heterogeneity that was not considered previous studies and the spatial resolution of air dispersion modeling is also improved by kriging method. According to the type and distribution of urban forest, total 26 kinds of plant communities were distributed with Pinus densiflora community, Pinus densiflora-Quercus mongolica community, Pinus densiflora-Quercus acutissima community and other kinds of communities in the study area. In the results of estimating the $CO_2$ absorption amount for identification of the air purification effectiveness on urban forest, the annual absorption amount was total 108,155t/yr. Also, the annual absorption amounts of $NO_2$ and $SO_2$ were total 183.5 ton and 410.2 ton respectively. The findings from this study can confirm the differences of pollutant absorption by concentration that could not identify if spatial distribution of pollutant concentration had not been considered.

• Korean Chemical Engineering Research
• /
• v.49 no.5
• /
• pp.669-675
• /
• 2011

Fourier Transform Infrared Spectroscopy and in-situ Position Annihilation Lifetime Spectroscopy(PALS) analysis of hybrid film, which consist of silsesquioxane(SSQ) and 4-tert-butyl calix[4]arene-O,O',O",O'"-tetraacetic acid tetraethyl ester(CA[4]) have been investigated in order to understand initial formation of nanopore in the next generation porous low-k dielectrics(k < 2.0). SSQ/CA[4] can provide effective homogeneous thin film having porous structure. The porogen decomposition behavior were completely different in the two kinds of SSQ/CA[4] based hybrid film (i.e. SSQ/CA[4] 10 and SSQ/CA[4] 20%). Relatively small pores(1.5 nm) come from dispersion of uni-molecular CA[4] in the SSQ matrix have been generated at $300^{\circ}C$, while mesopores(2.5~3.0 nm) induced from self assembled CA[4] have been generated at $250^{\circ}C$. It might be due to highly interconnected structure of SSQ/CA[4] 20% hybrid thin film resulting in facile evacuating of decomposed fragment of CA[4] molecule.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.7
• /
• pp.4689-4696
• /
• 2015

The purpose of this study was to evaluate biomechanical characteristics of trekking shoes using 3D Bootie method as mimics barefoot form of F Co. that provides the best comfort and plantar pressure dispersion. The control group is normal trekking shoes of M Co. and K Co.. 13 healthy males measured the foot pressure, EMG and GRF. Collected data was analyzed using One-way ANOVA in order to investigate the effects of each trekking shoes. The results are as follows: Trekking shoe of F Co. was significantly wider in contact area than others at MF and significantly lower in maximum force, peak pressure than others at RF. In the case of muscle activity, acted in the same way as the effect of barefoot walking. In the case of GRF, effectively absorbed the impact force, so it is possible to efficient walking. As a result of the analysis, trekking shoe using of 3D Bootie method of F Co. can be efficient walking by reducing the load of foot during walking.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.43 no.5
• /
• pp.55-64
• /
• 2015

In this study, negative air ions, which can increase comfort and positively influence human health, was set as an evaluative factor for school forests. The characteristics, location and microclimate of school forests were examined to determine an effective school forest model for maximum negative air ion generation. It also aimed to provide basic data for the development of urban green fields. The negative air ion concentrations were different according to the green types. The order from the highest to the lowest was: single-layer structure($934ea/cm^3$) > multi-layer structure($794ea/cm^3$) > grass($553ea/cm^3$) > bare ground($529ea/cm^3$). As for the correlation with microclimate, negative air ion concentration was negatively correlated with temperature. The negative air ion concentration was significantly different according to planting type. The negative air ion concentration was higher at single-layer structure sites than at multi-layer structure sites, which appears to indicate that the temperature is higher when the vegetation structure was single-layer compared to multi-layer. Wind speed was higher at the single-layer planted site than at the multi-layer planted site. The vegetation wind shielding effect was lower at single-layer planted sites than at multi-layer planted sites. The single-layer planted site provided more favorable conditions for the generation and dispersion of negative air ions.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.2
• /
• pp.247-254
• /
• 2016

Since microzirconia has excellent thermal and mechanical properties with high chemical and electrical resistance, it can be used in various fields. When the surface of zirconia becomes hydrophilic, its dispersibility in water will be improved as well as the resistance to most hydrophobic contaminants will be increased. In this study, we investigated the introduction of a hydrophilic groups on the microzircornia surface through hydrolysis and condensation reactions with two different silanes containing hydrophilic functional groups, such as ${\gamma}$-aminopropyltrimethoxysilane (APS) and ${\gamma}$-ureidopropyltrimethoxysilane (UPS) at different pH and concentration conditions. A covalent bond formation between the surface hydroxyl groups of zirconia and that of hydrolyzed silanes was confirmed by ninhydrin test and FT-IR spectroscopy. However, the presence of Si on the surfaces of both silane modified microzirconias was unable to detect by SEM/EDS technique. In addition, particle size analysis results provide that the size of microzirconia was changed to smaller or bigger than that of original zirconia due to crushing and aggregation during the modification process. The water dispersibility was improved for only APS modifed zirconia (AS-2 and AS-3) under neutral pH condition, but the water dispersibility and stability for all cases of 0.5~2% UPS modifed zirconia (US series) were much improved.

• Journal of the Society of Naval Architects of Korea
• /
• v.32 no.1
• /
• pp.42-57
• /
• 1995

An efficient and accurate scheme has been constructed by taking advantages of the hi-quadratic spline scheme and the higher-order boundary element method selectively depending on computation domains. Boundary surfaces are represented by 8-node boundary elements to describe curved surfaces of a ship and its neighboring free surface more accurately. The variation of the velocity potential complies with the characteristics of the 8-node element on the body surface. But on the free surface, it is assumed to follow that of the hi-quadratic spline scheme. By which, the free surface solution is free from numerical damping and has better numerical dispersion property. As numerical examples, steady and unsteady Neumann-Kelvin problems are considered. Numerical results for a submerged spheroid, Series 60($C_B=0.6$) and a modified support the proposed method. Finally, a new upstream radiation condition is derived using a wave equation operator in order to deal with problems for subcritical reduced frequency. The relevance of this operator has been confirmed in the case of unsteady Kelvin source potential.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.1
• /
• pp.5-11
• /
• 2010

The objective of this study is to evaluate the effect of operational parameters such as rotation speed and vibrating milling time for the fabrication of photocatalytic $TiO_2$ thin film using aerosol deposition methods. $TiO_2$ powders produced in the range of 1,000-3,000 rpm of rotation speed of centrifugal separator are ineffective on the fabrication of $TiO_2$ thin film by aerosol deposition due to the problem of nozzle powder jam. $TiO_2$ powders controlled by vibrating milling had about 420 nm of average diameter after 2 hr of vibrating milling time. The result of XRD analysis indicated that $TiO_2$ powders had a anatase phase. Vibrating milling methods was considered to be an effective pre-treatment process for $TiO_2$ powder control. Consequently $TiO_2$ photocatalytic thin film with dispersion of anatase crystallites controled by vibrating milling was successfully fabricated by aerosol deposition. The permeation flux of $TiO_2$ photocatalytic thin film with the immobilized $TiO_2$ powder was higher than that of suspended $TiO_2$ powder. Therefore, $TiO_2$ photocatalytic thin film promises to be one of the effective methods for enhancing filtration performance for the treatment of organic pollutants.