• Journal of Technologic Dentistry
• /
• v.40 no.1
• /
• pp.17-25
• /
• 2018

Purpose: When casting of ceramics, proper amount of deflocculant was added for disperse the particles in slip. In this study, examined the optimum amount of APMA(ammonium polymethaacrylate) water as deflocculant for casting the zirconia. Methods: The 100 g of zirconia powder were ball milled with 300 g zirconia ball, 90 g of distilled water, and APMA water in polyethylene pot for 24 hours. The amount of APMA water were added as deflocculant from 0.5 to 0.9 g at an intervals of 0.1 g. The viscosity of slip with no deflocculant showed 1362c.p. and the minimum viscosity with 580c.p. obtained when the slip contained 0.7% of deflocculant. Bar type specimens were casted with plaster mold and biscuit fired at $1100^{\circ}C$ for 1 hours. Biscuit fired specimens were finished with $60mm(L){\times}14mm(W){\times}10mm(H) bar$. Finished specimens were 2nd fired at $1500^{\circ}C$ for 1 hour. Results: Regardless the addition of deflocculant, all 2nd fired specimens showed 0% of apparent porosity and water absorption. The specimens with no deflocculant showed 24% of drying shrinkage and 27.4% firing shrinkage. On the other hand, The specimens with deflocculant showed 17.4% of drying shrinkage and 17.6% firing shrinkage regardless the amount of deflocculant. The maximum bulk density with $6.09g/cm^3$ obtained when the specimens casted with 0.7~0.9% of deflocculant contained slips. Bend strength of specimen with no deflocculant showed 680 MPa and the maximum bend strength with 814 MPa obtained when the specimen casted with 0.7% of diflocculant contained slip. Conclusion : It was found that the particle shape of the powder according to the dispersing agent is added, the particle size, sintering temperature and affect the particle size distribution, sintering time, sintering atmosphere, such a great influence on the sintering.

• Korean Journal of Materials Research
• /
• v.20 no.2
• /
• pp.51-54
• /
• 2010

Transparent conductive films of single wall carbon nanotube (SWCNT) were prepared by spray coating method. The effect of acid treatment on the SWCNT films was investigated. The field emission scanning electron microscope (FESEM) shows that acid treatment can remove dispersing agent. The electrical and optical properties of acid-treated films were enhanced compared with those of as deposited SWCNT films. Nitric acid ($HNO_3$), sulfuric acid ($H_2SO_4$), nitric acid:sulfuric acid (3:1) were used for post treatment. Although all solutions reduced sheet resistance of CNT films, nitric acid can improve electrical characteristics efficiently. During acid treatment, transmittance was increased continuously with time. But the sheet resistance was decreased for the first 20 minutes and then increased again. Post-treated SWCNT films were transparent (85%) in the visible range with sheet resistance of about $162{\Omega}/sq$. In this paper we discuss simple fabrication, which is suitable for different types of large-scale substrates and simple processes to improve properties of SWCNT films.

• Journal of the Korean Solar Energy Society
• /
• v.32 no.4
• /
• pp.9-16
• /
• 2012

Nanofluids using Carbon Nanotubes have a excellent thermal characteristic. In this study, for increasing the efficiency of solar collector, the thermal conductivity and viscosity of Ethanol-Oxidized Multi-walled Carbon Nanofluids were measured. Nanofluids were manufactured by ultra-sonic dispersing Oxidized Multi-walled Carbon Nanotubes(OMWCNTs) in ethanol at the rates of 0.0005 ~ 0.1 vol%. The thermal conductivity and viscosity of manufactured nanofluids were measured at the low temperature($10^{\circ}C$), the room temperature($25^{\circ}C$) and the high temperature($70^{\circ}C$). For measuring thermal conductivity and viscosity, we used transient hot-wire method and rotational digital viscometer, respectively. As a result, under given temperature conditions, thermal conductivity of the 0.1 vol% nanofluids improved 33.74% ($10^{\circ}C$), 33.14% ($25^{\circ}C$) and 32.36% ($70^{\circ}C$), and its viscosity increased by 37.93% ($10^{\circ}C$), 31.92% ($25^{\circ}C$) and 29.42% ($70^{\circ}C$) than the base fluids.

• Journal of Sasang Constitutional Medicine
• /
• v.21 no.1
• /
• pp.44-52
• /
• 2009

1. Objectives Jeong-Jo's death has many mistery. So we understand rightly Jeong-Jo's death. we inspect closely medical records of 20 days before death(in The Annals of the Choson Dynasty(朝鮮王朝實錄), Hong Je Jun Se(弘齋全書)， GukSoBoGam(國朝寶鑑). We understand medical treatment before death. It is based on Jeong-Jo's Constitution. So we trace the cause of a Jeong-Jo's death rightly. 2. Methods According to The Annals of the Choson Dynasty(朝鮮王朝實錄), Hong Je Jun Se(弘齋全書) GukSoBoGam(國朝寶鑑). We found out Jeoung-Jo's Sasang constitutional elemet. We point on Jeoung-Jo's nature and emotion, temperament and talent, features and way of speaking, physical appearance, healthy state, ordinary symptom, pathological syndromes and pharmacology. so documentary records was worthy of notice. 3. Results and conclusions 1. Jeong-Jo has prominent cheekbones,flat face. It belong to Tae-eum. 2. Jeong-Jo's physical appearance is mild,around,large. It belong ro Tae-eum. 3. Jeong-Jo's favorite food and herb were belong to Tae-eum interior febrile disease herb. which is Exhale Dispersing Qi 4. So even though Jeoung-Jo is Tae-eum, He had a weak body. It main cause that Smoking, insomnia, heave work, Hwa disease. 5. Jeong-Jo's is Interior febrile disease induced form the liver affected by heat in Tae-eumin

• Journal of the Korean Magnetics Society
• /
• v.4 no.4
• /
• pp.326-334
• /
• 1994

This paper describes the fabrication of the hydrophilic magnetic fluid with high viscosity and its application to oil seal apparatus used with the Nd-permanent magnet. The results are as follows. 1) The ultrafine magnetite particles under the size of $100\;{\AA}$ are first coated by the oleic acid ion and again adsorbed by the hydrophilic D. B. S. ion, and there by hydrophilic magnetic fluid with high viscosity could be made by dispersing them into the ethylene glycol. 2) In development of the oil seal apparatus using magnetic fluid and Nd-permanent magnet, the viscosity and magnetic susceptibility show high when the $Fe_{3}O_{4}$ content is over 50%(g/cc) in the fluid, so that such properties could improve highly the capability of oil seal. 3) The maximum of the resisting pressure of the oil seal using the ethylene glycol base magnetic fluid and the Nd-permanent magnet, is about $50\;g/\textrm{cm}^2$, under the condition of this experiment. Therefore the oil seal may not be suitable for the ship engine and the driving part of the automobile, and thus it needs a lot further complementary reserch. However, it is quite favourable for such an oil seal apparatus as speed reducer under the condition of atmospheric pressure.

• Korean Journal of Applied Biomechanics
• /
• v.16 no.2
• /
• pp.193-205
• /
• 2006

This study was to analysis the kinematic and kinetic differences between new walking shoe(NWS : RYN) and general walking shoe(GWS). The subjects for this study were 10 male adults who had the walking pattern of rearfoot shrike with normal foot. The movement of one lower leg was measured using plantar pressure and Vicon Motion Analysis Program(6 MX13 and 2 MX40 cameras : 100 f / s) while the subjects walked at the velocity(1.5m/s. on 2m).. The results of this study was as follows : 1. The NWS was better than the GWS that caused injuries such as adduction, abduction and pronation are reduced While walking on a perpendicular surface, the landing angle and the knees angles were extensive which makes walking more safe which reduces anxiety and uneasiness. 2. The bottom of the NWS were now made into a more circular arch which supports the weight of the body and reduces the irregular angles when wearing GWS. This arch made the supporting area more wide which made the upholding the trunk of the body more effective. The whole bottom of the foot that supports the weight is more flexible in addition, increases the safeness of walking patterns and the momentum of the body. 3. The moment the heel of the foot of the NWS touch the ground, the range of the pressure were partially notable and the range of the pressure on the upper part of the thigh were dispersed The injuries that occurred while walking. primary factors when a shock related injuries are reduced Judgements of the impacts of the knees and the spinal column dispersing could be made.

• Herbal Formula Science
• /
• v.23 no.2
• /
• pp.235-243
• /
• 2015

Objectives : The object of this paper is to seek and provide evidences for the possibilities of substitutional use of Aquilariae Resinatum Lignum and Aucklandiae Radix for Moschus as an ingredient of Gongjin-dan by clarifying the similarities and differences among these herbs in the classic literatures. Methods : We have found out the features of Moschus, Aquilariae Resinatum Lignum and Aucklandiae Radix by searching Qi, Flavor and Effect of each herb in 『Shennongbencaojing』, 『Zhengleibencao』, 『Bencaogangmu』, 『Dongeuibogam』, 『Bencaobeiyao』, 『Euijongsonik』 and 『Bangyakhappyeon』. And we have compared and analyzed the fomula of Gongjin-dan and other prescriptions in 『Beijiqianjinyaofang』, 『Shengjizonglu』, 『Shiyidexiaofang』, 『Dongeuibogam』, 『Euijongsonik』, 『Euibanghwaltu』 and 『Bangyakhappyeon』. Results : We could find out the similarities and differences in Qi, Flavor and Effect among Moschus, Aquilariae Resinatum Lignum and Aucklandiae Radix. And we could also find the examples of substitutional use of Aquilariae Resinatum Lignum as an ingredient of Gongjin-dan by comparing the formula of Gongjin-dan in the classic literatures as above. And in the other prescription, Aucklandiae Radix was also used instead of Moschus. Conclusions : All of three herbs have pungent in Flavor and warm in Qi. And these herbs also have similar effects in dispersing invading pathogenic factors and smoothening the flow of Qi. And according to 『Bencaobeiyao』, 『Euijongsonik』 and 『Bangyakhappyeon』, Aquilariae Resinatum Lignum and Aucklandiae Radix direct and regulate the Qi in common. The substitutional use of Aquilariae Resinatum Lignum and Aucklandiae Radix instead of Moschus in Gonjin-dan seems to be related to 'the ascent of Water and descent of Fire' effect of Gongjin-dan.

• Journal of Pharmaceutical Investigation
• /
• v.30 no.3
• /
• pp.179-189
• /
• 2000

Clebopride malate(Cm) is a new benzamide drug which has a potent central antidopaminergic activity possessing antiemetic and anxiolytic properties. A purpose of this study was to assess the feasibility of formulating sustained release preparation by dispersing a drug in hydrophilic polymeric matrices and double layered tablets(DLT), using HPMC, carbopol, PEO, PVP/VA and other polymers as a rate controlling barrier. The matrix and DLT showed optimum dissolution pattern up to 8 hours and the contents of polymer were optimized at 30% level in this preparation. After an oral administration in beagle dog, Cm concentration was determined by use of GC-ECD and pharmacokinetic parameters were calculated by Vallner's method. The AUC of DLT showed similar results and the duration of action was increased 55% compared to that of regular release dosage form. The calculated absorption rate effectiveness(ARE) and controlled release effectiveness(CRE) for DLT increased 50% compared to that of matrix, the overall effectiveness(E) of this product appears to be about 70%. in vivo effectiveness test, DLT showed significant differences from control on antiemetic action of Cm. In consequence, it was possible to conclude that double layered tablet might be a good candidate for the sustained release dosage forms.

• Journal of Convergence for Information Technology
• /
• v.10 no.11
• /
• pp.23-29
• /
• 2020

As IoT devices increase exponentially, minimizing MIMO interference and increasing transmission capacity for sending and receiving IoT information through multiple antennas remain the biggest issues. In this paper, secret key-level distribution mechanism using deep learning is proposed to minimize MIMO-based IoT communication noise. The proposed mechanism minimizes resource loss during transmission and reception process by dispersing IoT information sent and received through multiple antennas in batches using deep learning. In addition, the proposed mechanism applied a multidimensional key distribution processing process to maximize capacity through multiple antenna multiple stream transmission at base stations without direct interference between the APs. In addition, the proposed mechanism synchronizes IoT information by deep learning the frequency of use of secret keys according to the number of IoT information by applying the method of distributing secret keys in dimension according to the number of frequency channels of IoT information in order to make the most of the multiple antenna technology.

• Journal of Digital Convergence
• /
• v.14 no.12
• /
• pp.193-199
• /
• 2016

MR(magnetorheological) devices for vehicle applications requires the consistent control performance and the reliable operation. However, the corrosion of iron particles consisting the MR fluid can significantly affect on MR properties. This paper presents an effect of the MR particle corrosion on the performance of MR fluids such as shear stress magnitude which is directly concerned with control performance. As a first step, MR particles are corroded by water-calcium chloride solution. The resulting MR particles are examined by scanning electron microscope (SEM) and their molar ratios are analyzed by the energy dispersive X-ray analysis (EDAX). By dispersing the corroded MR particles into silicone oil, the corroded MR fluid is synthesized for evaluation of MR effect change. A rotational viscometer is adopted to measure shear stress magnitude. Finally, it is demonstrated how much the corrosion affect on performances by comparing the normal MR fluid to the corroded MR fluid, from which performance investigation of the MR devices containing the corroded MR particles will be studied in the second phase of this study.