• Journal of the Mineralogical Society of Korea
• /
• v.26 no.3
• /
• pp.189-196
• /
• 2013

In this study, we tried to define the origin of fine-grained sediments in Southwestern Cheju Island Mud (SWCIM) using principal component analysis. We used relative clay mineral compositions using 138 marine surface sediments, 4 Huanghe sediments and 3 Changjiang river sediments by the semi-quantitative X-ray diffraction analysis. We made bioplot diagram using R program with principal component 1 and component 2 because they might contain more than 90% of all data. Although the distribution pattern of each clay minerals in SWCIM is so intricate, smectite and kaolinite contents are high in the west region, but illite and chlorite contents are rich in the east region. In the biplot, the east region of SWCIM distribute around Changjiang river, whereas west region of SWCIM disperse around Huanghe. Our results might reveal that west region of SWCIM is mainly originated by Huanghe, but east region of SWCIM by Changjiang River.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.7
• /
• pp.23-30
• /
• 2014

This paper deals with the characteristics of deformation of the underground corrugated steel plate culverts constructed in the areas where the minimum depth of within 1.5 m soil cover is not secured in the bottom of highways. The underground corrugated steel plate culverts at shallow depth are often designed and constructed with the consideration of the minimum depth of soil cover according to the design standards, which was made in order to minimize any deformation. Additionally, if under unfavorable conditions, slabs are set up for stress relaxation to disperse and minimize the weight of loads transferred to the corrugated steel plate culverts. Nevertheless, if the underground corrugated steel plate culverts are built in areas where the minimum depth of soil cover inevitably cannot be secured, there may occur some deformation. In this paper, a research was carried out to identify the characteristics of deformation in areas where the minimum depth of soil cover is not secured. The result shows that there existed the deterioration of pavement and in its smoothness around the corners of slabs for stress relaxation. To this end, this paper studied the structural stability of the underground corrugated steel plate culverts established in the areas with no minimum depth of soil cover secured, with the consideration of causes and solutions of pavement deterioration.

• The Journal of the Petrological Society of Korea
• /
• v.23 no.4
• /
• pp.351-366
• /
• 2014

We assumed the situation where an eruption column had been formed by the explosive Plinian eruption from Mt. Baekdu and that the collapse of eruption column had caused pyroclastic density currents to occur. Based on this assumption, we simulated by using a Titan2D model. To find out about the range of the impacts of pyroclastic density currents by volcanic eruption scenarios, we studied the distance for the range of the impacts by VEIs. To compare the results by each volcanic eruption scenario, we set the location of the vent on the 8-direction flank of the outer rim and on the center of the caldera, the internal friction angle of the pyroclastic density currents as $35^{\circ}$, the bed friction angle as $16^{\circ}$. We set the pile height of column collapse and the vent diameter with various VEIs. We properly assumed the height of the column collapse, the diameter of the vent, the initial rates of the column collapse and the simulation period, based on the VEIs, gravity and the volume of the collapsed volcanic ash. According to the comparative analysis of the simulation results based on the increase of the eruption, the higher VEI by the increase of eruption products, the farther the pyroclastic density currents disperse. To the northwest from the vent on the northeast slope of the outer rim of the caldera, the impact range was 3.3 km, 4.6 km, 13.2 km, 24.0 km, 50.2 km, 83.4 km or more from VEI=2 to VEI=7, respectively. Once the database has been fully constructed, it can be used as a very important material in terms of disaster prevention and emergency management, which aim to minimize human and material damages in the vicinity of Mt. Baekdu when its eruption causes the pyroclastic density currents to occur.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.10
• /
• pp.933-940
• /
• 2009

To evaluate characteristics in spray flame, laminar counterflow is investigated on the effects of equivalence ratio and fuel by a two-dimensional DNS (direct numerical simulation). For the gaseous phase, Eulerian mass, momentum, energy, and species conservation equations are solved. For the disperse phase, all individual droplets are calculated by the Lagrangian method without the parcel model. n-Decane ($C_{10}H_{22}$) and n-heptane ($C_7H_{16}$) is used as a liquid spray fuel, and a one-step global reaction is employed for the combustion reaction model. As equivalence ratio increases, the fuel ignites early and the high temperature region spreads wider. The peak value of temperature, however, tends to once increase and then decreases with increasing equivalence ratio. The decrease in the peak value of temperature for the higher equivalence ratio condition is caused by the cooling effect associated with droplet group combustion. Since the evaporation of n-heptane is early, the high temperature region spreads wider than ndecane, but the peak values of temperature for both n-heptane and n-decane is almost same.

• Journal of the Economic Geographical Society of Korea
• /
• v.17 no.3
• /
• pp.538-553
• /
• 2014

The aim of this study is to consider the degree of supply-demand balance in relation to the characteristics of retail sale activities in depopulation aging regions and the degree of aging by using simple regression analysis. The major findings of this study are as follows. While aging society, and aged society regions show a similar major retail sale industries, super-aged society shows fewer major industries and different industry composition. These characteristics are seen by different phenomenon and the background of the particular retail structure. The first one is that the number of employees per establishment increases when the aging phenomenon is not accelerated, and the annual sales per capita purchasing power decrease because their purchasing power becomes lower when the aging phenomenon is severe, but it also shows a high density of establishments because disperse location of establishment within depopulation aging region. The second one is the retail structure with high labor productivity in a aged and superaged society region. We identify the extent of demand and supply in general retails, fuel retails, food and beverage, and tobacco retails which represent the highest sales rates in depopulation aging region. As a result, general retails are seen as 'supply-demand balance region' in aged and super-aged society, fuel retail sales in aged and super-aged society which generally shows less sales, and food and beverages, and tobacco retails in super-aged society. The higher the degree of aging is, the less the regional differences in the gap between demand and supply is. This is because the difference in purchasing power between these regions is small.

• The Journal of Dong Guk Oriental Medicine
• /
• v.2 no.1
• /
• pp.19-54
• /
• 1993

To see both $Sh{\grave{u}}nq{\grave{i}}daot{\acute{a}}nt{\bar{a}}ng$(dissipate phlegm and promote vital energy circulation) and $Hu{\grave{a}}y{\bar{u}}t{\bar{a}}ng$(blood circulation and disperse blood stasis) influencing on thrombosis, contusion-hyperemia, and hyperlipidemia, at first we measured the density of FDP, the quantity of fibrinogen, prothrombin time, and the number of platelet of rat taken thrombosis by endotoxin. Secondly we measured the increase-rate of "paw swelling", the number of platelet, the quantity of fibrinogen, and prothrombin time of rat taken contusion-hyperemia. And then we measured the quantity of total cholesterol in serum and of H.D.L-cholesterol and of triglyceride and of phospholipid and of ${\beta}-lipoprotein$, its weight, and the variation of the quantity of electrolyte of rat taken hyperlipidemia by the oral-injection of choleserol. As a result, we can conclude as follows : 1. Out of the test of thrombosis, we can recognize not only the noticeable increae of the number of platelet and the quantity of fibrinogen, but also the noticeable decrease of prothrombin time and the density of FDP in case of $Sh{\grave{u}}nq{\grave{i}}daot{\acute{a}}nt{\bar{a}}ng$-injected rat and $Hu{\grave{a}}y{\bar{u}}t{\bar{a}}ng$-injected rat. 2. Out of the test of contusion-hyperemia, we can recognize not only the noticeable increase of the number of platelet and the quantity of fibrinogen, but also the noticeable decrease of prothrombin time and "increase-rate of paw swelling" in case of $Sh{\grave{u}}nq{\grave{i}}daot{\acute{a}}nt{\bar{a}}ng$-injected rat and $Hu{\grave{a}}y{\bar{u}}t{\bar{a}}ng$-injected rat. 3. Out of the test of hyperlipidemia, at first we can recognize that test rat's weight increased as close as that of normal rat. And we can recognize the noticeable decrease of the triglyceride and phospholipid and ${\beta}-lipoprotein$." Also, in case of the variation of electrolyte we can recognize the decrease of calcium and potassium in $Sh{\grave{u}}nq{\grave{i}}daot{\acute{a}}nt{\bar{a}}ng$-injected rat, and of sodium and magnesium in $Hu{\grave{a}}y{\bar{u}}t{\bar{a}}ng$-injected rat. Thus, as the above-mentioned, in covering thrombosis, contusion-hypermia, and hyperlipidemia, the effect of $Sh{\grave{u}}nq{\grave{i}}daot{\acute{a}}nt{\bar{a}}ng$ and $Hu{\grave{a}}y{\bar{u}}t{\bar{a}}ng$ can be recognized. Granting that $Hu{\grave{a}}y{\bar{u}}t{\bar{a}}ng$ reveals its effectiveness in thrombosis and contusion-hyperemia, and $Sh{\grave{u}}nq{\grave{i}}daot{\acute{a}}nt{\bar{a}}ng$ in hyperlipidemia, it can be inferred that contusion-hyperemia is like "model of blood stasis form" as thrombosis and hyperlipidemia "phlegm-retention diseases form", and both phlegm-retention and blood stasis have correlation each other.

• Korean Journal of Environment and Ecology
• /
• v.19 no.2
• /
• pp.150-161
• /
• 2005

Soraksan National Park and Odaesan National Park, that are 20.7 km apart, should play an important role as habitats and corridors for wildlife because they are located in the center of Baekdudaegan. However, landscape features such as small area, fragmentation, and geographic isolation seem to impede the proper ecological functions of these two national parks. Using GIS technique, we examined the pattern of fragmentation in these two national parks and adjacent regions (Sokcho-si, Goseong-gun, Inje-gun, Yangyang-gun, and Hongcheon-gun) encompassing a total of $4573.5km^2$ in area. We then selected the patches suitable for an endangered carnivorous species, leopard cat, based on habitat conditions, and identified the network and stepping stone among patches to enable leopard cats to migrate. Diverse roads and artificial facilities in the study area generated a total of 24,701 patches: 39 patches among these were selected as potential habitats upon considering the habitat condition such as vegetation types and minimum area for leopard cat. Three patches nearby Gyebangsan and Bangtaesan were identified as a potential network center to relieve the effects of fragmentation and isolation of the two national parks. Our results also showed that patches containing Jombongsan and Bangtaesan would act as a source patch from there leopard cats can disperse to both national parks. It is an urgent task to identify the pattern of fragmentation and the connectivity between patches in national parks and adjacent areas for wildlife conservation because almost all national parks confront land- scape problems similar to the two national parks examined in this study.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.5
• /
• pp.500-509
• /
• 2013

This study reports a numerical analysis of the internal flow characteristics of the integrated urea-SCR muffler system with the various geometries of the multi-perforated tube which is set up between the muffler inlet and in front of SCR catalysts. The multi-perforated tube is generally used to disperse uniformly the urea-water solution spray and to make better use of the SCR catalyst, resulting in the increased $NO_x$ reduction and decreased ammonia slip. The effects of the multi-perforated tube orifice area ratios on the velocity distributions in front of the SCR catalyst, which is ultimately quantified as the uniformity index, were investigated for the optimal muffler system design. The steady flow model was applied by using a general-purpose commercial software package. The air at the room temperature was used as a working fluid, instead of the exhaust gas and urea-water solution spray mixture. From the analysis results, it was clarified that the multi-perforated tube geometry sensitively affected to the formation of the bulk swirling motion inside the plenum chamber set in front of the SCR catalyst and to the uniformity index of the velocity distribution produced at the inlet of the catalyst.

• Journal of IKEEE
• /
• v.21 no.4
• /
• pp.368-374
• /
• 2017

In this Paper, we developed a low power type LED security light using LED lighting that substitutes a 220[V] commercial power source for a solar cell module instead of a halogen or a sodium lamp. in addition, a PWM type drive control circuit is designed to minimize the heat generation problem and the drive current of the LED drive controller. in developed system, The light efficiency measurement value is 93.6[lm/W], and a high precision temperature sensor is used inside the controller to control the heat generation of the LED lamp. In order to eliminate the high heat generated from the LED lamp, it is designed to disperse quickly into the atmosphere through the metal insertion type heat sink. The heat control range of LED lighting was $50-55[^{\circ}C]$. The luminous flux and the lighting speed of the LED security lamp were 0.5[s], and the beam diffusion angle of the LED lamp was about $110[^{\circ}C]$ by the light distribution curve based on the height of 6[m].

• Journal of the Microelectronics and Packaging Society
• /
• v.17 no.1
• /
• pp.63-68
• /
• 2010

CNT and permalloy composite plating was investigated. CNTs were pretreated prior to electroplating to disassemble the tangled CNT lumps. The ball milling as a physical pretreatment and the acid treatment as a chemical pretreatment were used. 10M nitric acid and 10 M sulfuric acid were used for the chemical pretreatment. Sulfuric acid was more effective than nitric acid to disassemble CNT lumps. To disperse CNT in the solution, surfactants were used. SDS, Triton X-100 and PAA were used for this purpose. More CNTs were incorporated in permalloy coating when PAA was used as a surfactant. The surface morphologies were observed with FESEM after electroplating CNT and permalloy. The current densities were varied from 10 to $80\;mA/cm^2$ and the concentration of PAA was fixed at 2 g/L. The optimum current density without surface cracks was $20\;mA/cm^2$. The crystallinity of the deposit was analyzed with XRD and the surface hardness was analyzed with Vicker's hardness tester. The corrosion behavior was analyzed with polarization plot. The physical properties of permalloy were not improved with CNT composite plating.