• Journal of Surface Science and Engineering
• /
• v.27 no.2
• /
• pp.83-90
• /
• 1994

We have investigated the mechanism for the abnormal oxide growth occuring during oxidation of the crystalline tungsten silicide. TEM and XPS analysis reveal the abnormaly grown oxide layer consisting of crystalline $Wo_3$ and amorphous $SiO_2$. The presence of crystalline $Wo_3$ provides a rapid diffusion of oxygen through the oxide layer. The abnormal oxide growth is mainly due to the poor quality of initial oxide layer growth on tungsten silicide. Two species such as tungsten and silicon from decomposition fo tungsten silicide as well as silicon supplied from the underlying polysilicon are the main contributors sto abnormal oxide forma-tion. Consequently, the abnormal oxidation results in the disintegration of tungsten silicide and thinning of polysilicon as well.

• Korean Journal of Heritage: History & Science
• /
• v.45 no.2
• /
• pp.100-113
• /
• 2012

The tombstone of Yi Chungmugong in the Joseon Dynasty located Namhae, Gyeongnam is consisted of sandstone. The Bisin and Bijwa of the tombstone have narrow range of magnetic value less than $0.2({\times}10^{-3}SI\;unit)$ and the Isu covered pigment on surface also has same magnetic susceptibility range. Therefore, the composition of all tombstone have similar lithological characteristics. The side of the tombstone appeared fine-grained sandstone to coarse-grained graywacke boundary clearly and back of tombstone observed lamination. Especially deterioration type is concentrated in front and back of the tombstone blistering (8.2% of back), scaling (10.2% of back), granular disintegration (28.1% of back) and discoloration (53.5% of front). Results of contaminants analysis, the front of the Bisin separated in 3 type of surface - granular disintegration-scaling. Among this area, surface detected Ca, S and Cl in high density, but these contaminants elements have more lower detect density from surface to granular disintegration. By contrast, on scaling area, these components are almost not detected, but Fe, K consisted of rock forming elements are detected. It is necessary to conservation and treatment of Yi Chungmugong tombstone in continuously, and salt cleaning on surface also needed. So through activity of conservation and restoration, epigraph preserved for their worth.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.4
• /
• pp.708-716
• /
• 1989

The purpose of this study is to investigate the breakup mechanism of a liquid jet in a coaxial air flow. By using the high speed camera, measured were the instantaneous change of the wave length, amuplitude of disturbance, propagation velocity of wave and breakup length, and the relationships between those data were examined. The shape of the surface of the liquid jet appeared to be rather complicated and irregular. The growth rate of disturbance was not constant, and was changed at the moment of 3ms prior to the disintegration of the liquid jet. Simultaneously at this moment, the propagation velocities of the sequential waves were reversed and the wave length was rapidly decreased.

• KCID journal
• /
• v.14 no.1
• /
• pp.67-79
• /
• 2007

Concrete repair and reinforcement is a complex process, presenting unique challenges very different from those experience in the field of construction. The purpose of this study is to analyze the pattern and mechanism of deteriorations in irrigation and drainage structure. Damage and deteriorated structures are classified with several types. This provides a survey of crack repair methods, including a summary of the procedures that are being used. It is systematically evaluated with the disintegration on irrigation & drainage structure; drainage sluice gate, pumping station, drainage pumping station. Following the evaluation of the irrigation & drainage structure, a suitable repair and reinforcing procedure can be selected based on this report

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.10a
• /
• pp.282-287
• /
• 2004

Unielement combustion tests were conducted using coaxial bi-swirl injectors. Major experimental parameters were a recess length and a fuel-side swirl chamber. Combustion efficiency mainly depends on a mixing mechanism for the present coaxial swirl injectors. Low-frequency pressure excitations around 200Hz were observed for all injectors. However, dynamic behaviors considerably differ for an external and an internal mixing case controlled by a recess length. The internal mixing induces mixture to be biased at a specific frequency in a mass flow rate, which results in a relatively high amplitude of pressure fluctuations but results for the external mixing case show that fuel and oxidizer mixture flow carries more complicated, multiple wave characteristics due to broad mixing region as well as disintegration and merging phenomena of propellant films.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.5
• /
• pp.174-181
• /
• 1998

Experimental and analytical studies are presented to characterize the break-up mechanism and atomization processes of the intermittent- impinging-type nozzle. Gasoline jets passing through the circular nozzle with the outlet diameter of 0.4mm and the injection duration of 10ms are impinged on each other. The impingement of fuel jets forms a thin liquid sheet, and the break-up of the liquid sheet produces liquid ligaments and droplets subsequently. The shape of liquid sheets was visualized at various impinging velocities and angles using the planer laser induced fluorescence (PLIF) technique. Based on the Kelvin-Helmholtz wave instability theory, the break-up length of liquid sheets and the droplet diameter are obtained by the theoretical analysis of the sheet disintegration. The mean diameter of droplet is also estimated analytically using the liquid sheet thickness at the edge and the wavelength of the fastest growing wave. The present results indicate that the theoretical results are favorably agreed with the experimental results. The size of droplets decreases after the impingement as the impinging angle or the injection pressure increase. The increment of the injection pressure is more effective than the increment of the impinging angle to reduce the size of droplets.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.12
• /
• pp.3179-3186
• /
• 1993

The study on the spray characteristics of TBI(Throttle Body Injection) injector has been carried out in this paper. The objective of this study is to improve the performance of TBI injector. The increase in the injection pressure and the utilization of assisted air are considered. The spray patten of TBI injector take the hollow-cone shape with $60^{\circ}~70^{\circ}$ spray angle regardless of injection pressure and injection pulse width. SAMD(Sauter Mean Diameter) of water in TBI injector are 510-$550{\mu}m$ and 310-$370{\mu}m$ respectively when injection pressures are $0.75 kgf/cm^{2}$ and $2.8 kgf/cm^{2}$. Then SMD of gasoline is estimated 380~$410{\mu}m$ and 230~$280{\mu}m$ respectively. The improvement of spray characteristics in TBI injector can be obtained with assisted air. If $W_{A}/W_{L}$ was over 0.2, SMD of water can be made under $50{\mu}m$.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05c
• /
• pp.213-218
• /
• 1996

Characteristics of high density U-Mo alloy powder prepared by centrifugal atomization have been examined. The results indicate that the majority of the atomized U-Mo alloy particles has a smooth surface and frequently near-perfect spheroidal shape with few satellites attached. The size distribution of atomized U-Mo alloy powder shows the mono-modal size distribution seen in ligament disintegration mechanism. All phases of atomized alloy powder below 150$\mu\textrm{m}$ irrespectively to particle size are found to be ${\gamma}$-U (cubic structure) phases with isotropic structure and not to be U$_2$Mo phase at all. The microstructure of atomized U-Mo alloy particulates has micro-crystalline structure with non-dendritic gram supersaturated with Mo element. Also the grain size of ${\gamma}$ -U tends to decrease with the decrease of the powder diameter.

• Journal of ILASS-Korea
• /
• v.2 no.2
• /
• pp.35-42
• /
• 1997

An innovating technique of atomizer has been proposed to supply and to atomise molten materials. Both of a simple geometry of nozzle and an improved nozzle have been fabricated in the present study. With these nozzles, characteristics of the suction and disintegration have been empirically investigated. The important conclusions are as follows; In the case of a simple nozzle: 1) Although the sucking up and supplying of molten materials are available, the applications of powder metallurgy are limited. 2) It is concluded that the more air flow rate, $W_A$ or the shorter the height of air nozzle from the surface of supplied water, $L_h$, the more the atomizing mass of liquids, $W_L$. In the case of an improved nozzle: 3) The stable liquids can be supplied due to cut off the passage of surrounding air entrainment by air jets. 4) The atomizing mass of liquids, $W_L$ has affected not so much on the height of nozzle from the surface of supplied water, $L_h$ as that from the orifice, hc.

• Journal of ILASS-Korea
• /
• v.17 no.1
• /
• pp.35-44
• /
• 2012

To improve the mixing and atomizing performance at the center region of the conventional coaxial shear injector spray, the concept of a coaxial porous injector was invented. This novel injection concept for liquid rocket engines utilizes the Taylor-Culick flow in the cylindrical porous tube. The 2-dimensional injector, which can be converted in three injection configurations, was fabricated, and several cold flow tests using water-air simulant propellant was performed. The hydraulic characteristics and the effects of a gas flow condition on the spray pattern and the Sauter mean diameter (SMD) was analyzed for each configuration. The atomizing mechanism of coaxial porous injector was different with the coaxial shear injector, and it was explained by the momentum of the gas jet, which is injected normally against the center liquid column, and by the secondary disintegration at the wavy interface of liquid jet, which was generated at the recessed region. The SMD of 2D coaxial porous injector, which has higher gas momentum, was measured and it shows better atomizing performance at the center and outer side of spray than the 2D coaxial shear injector.