• Pediatric Infection and Vaccine
• /
• v.6 no.1
• /
• pp.116-122
• /
• 1999

Purpose : Despite of development of neonatal intensive care, infections, especially catheter-related infection, have been a major problem in newborns on intensive care. Catheter-related infection is closely related to skin colonization so that skin disinfection is crucial to protect newborns from the infection. Cotton balls of seventy percent alcohol made by hospital frequently open to air so that composition of alcohol may be easily evaporated. We hypothesized that 10% povidone would have better disinfection compared to 70% alcohol and normal saline. Methods : The effect of skin disinfection was evaluated in newborn infants who were admitted to the neonatal intensive care unit(NICU) of Hanyang University Kuri Hospital by a skin swab culture before and after disinfectant exposure. Before skin disinfective preparation, the peripheral intravenous catheter insertion sites were swabbed for culture with sterile cotton moistened with normal saline. Cotton balls of 70% alcohol(Alcohol group, n=20) or 10% povidone and 70% alcohol(povidone group, n=20) were randomly selected. Normal saline swabs were used for controls(n=10). After swabbing, the skin swab culture was done on same sites with same procedure. Results : Before skin disinfection, culture-positivity was shown in 9 of 20 leases of alcohol and povidone groups, respectively and in 8 of 10 cases of the controls. After skin disinfection, culture-positivity was still shown in 3 of 9 cases of the Alcohol group, in 2 of 9 of the Povidone group, and in 6 of 8 cases of the controls. Disinfective effect was significantly different among the 3 groups(p=0.0387). The povidone group had significantly better disinfection than the controls(p=0.0156), but the alcohol group was not significantly different from the controls. Conclusion : The cotton balls of povidone had similar effect of disinfection compared to those of alcohol, but better disinfection than the controls. A disinfective effect of the cotton balls of alcohol was not, however, significantly different from the controls. We suggest that purity of alcohol, quality control of cotton balls of alcohol, and disinfection method should be reevaluated.

• Korean Journal of Environmental Biology
• /
• v.35 no.2
• /
• pp.116-122
• /
• 2017

Basic dyes such as malachite green and methylene blue have been used as disinfectants to control water fungal infections since the 1930s. However, after succeeding reports of carcinogenicity and bioaccumulation of the dye, their use was forbidden in lieu of public health. This study undertook to evaluate the therapeutic effect of sulfur solution processed by effective microorganisms (EM-PSS) against Saprolegnia parasitica infection, and its safety in fish. In vitro antifungal evaluation of EM-PSS inhibited the growth of S. parasitica mycelia at concentrations of 50 ppm or higher. The acute toxicity test of EM-PSS to the mud fish (Misgurnus mizolepis) measured a no effect concentration (NOEC) at 100 ppm, the lowest effect concentration (LOEC) at 125 ppm, and the half-lethal concentration ($LC_{50}$) at 125 ppm in juvenile and 250 ppm in the immature stage. In addition, the ecotoxicity test of EM-PSS using Daphnia magna inhibited swimming of D. magna at concentrations of 100 ppm or less. Lastly, the EM-PSS prevented infection of S. parasitica to mud fish, at concentrations of 50 ppm. Furthermore, at 100 ppm concentration, the EM-PSS showed no acute toxicity on mud fish, nor any eco-toxic effects on D. magnano. Therefore, we conclude that carcinogenic disinfectants such as malachite green and methylene blue could be replaced by EM-PSS to remove S. parasitica in mud fish farming, and might be a potential eco-friendly disinfectant in aquaculture.

• Korean Journal of Weed Science
• /
• v.9 no.2
• /
• pp.97-102
• /
• 1989

1. IAA showed no significant growth of root primordia and then lateral root emerged at 2 days after IAA treatment. BA treatment, however, strongly inhibited the formation of root primordia and a few lateral roots, if any, emerged about 5 days after treatment. 2. Treatment of BA and Indol-B on the water retaining ability sampled 1, 3, 5 days after chemical treatment was apparent on the soybean sprouts sampled 5 days after treatment while the difference among the treatments was negligible when sampled 1 and 3 days after treatment. 3. BA stimulated ABA content in the hypocotyl while inhibited ABA content in the root of soybean sprouts. ABA may relate with water retaining ability. 4. Soaking the soybean seeds to several seed disinfectant chemical solution had no effect on the growth and elongation of soybean sprouts. 5. It can be recommended that container of soybean sprouts should be shut tight during growing period except irrigation because the ethylene accumulation in the container may stimulate hypocotyl swelling and inhibit length of soybean sprouts.

• Restorative Dentistry and Endodontics
• /
• v.20 no.2
• /
• pp.699-720
• /
• 1995

This study was conducted to evaluate the effect of benzalkonium chloride solution as a wetting agent instead of water on dentin bonding with NTG-GMA/BPDM system (All-bond 2, Bisco.) and DSDM system (Aelitebond, Bisco.). Benzalkonium chloride solution is a chemical disinfectant widely used in medical and dental clinics for preoperative preparation of skin and mucosa due to its strong effect of cationic surface active detergent. Eighty freshly extracted bovine lower incisor were grinded labially to expose flat dentin surface, and then were acid-etched with 10 % phosphoric acid for 15 second, water-rinsed, and dried for 10 second with air syringe. The specimens were randomly divided into 8 groups of 10 teeth. The specimens of control group were remoistured with water and the specimens of experimental groups were remoistured with 0.1 %, 0.5 %, and 1.0 % benzalkonium chloride solution respectively. And then, the Aelitefil composite resin was bonded to the pretreated surface of the specimens by use of All-bond 2 dentin bonding system or Aelitebond dentin bonding system in equal number of the specimens. The bonded specimens were stored in $37^{\circ}C$ distilled water for 24 hours, then the tensile bond strength was measured, the mode of failure was observed, the fractured dentin surface were examined under scanning electron microscopy, and FT-IR spectroscopy was taken for the purpose of investigating the changes of the dentin surface pretreated with benzal konium chloride solution followed by each primer of the dentin bonding systems. The results were as follows : In the group of bonding with NTG-GMA/BPDM dentin bonding agent(All-bond 2), higher tensile bond strength was only seen in the experimental group remoistured with 0.1 % benzal konium chloride solution than that in water-remoistured control group(p<0.05). In the group of bonding with DSDM dentin bonding agent (Aelitebond), no significant differences were seen between the control and each one of the experimental group(p<0.05). Higher tensile bond strength were seen in NTG-GMAIBPDM dentin bonding agent group than in DSDM dentin bonding agent group regardless of remoistur ization with benzal konium chloride solution. On the examination of failure mode, cohesive and mixed failure were predominantly seen in the group of bonding with NTG-GMAIBPDM dentin bonding agent, while adhesive failure was predominantly seen in the group of bonding with DSDM dentin bonding agent. On SEM examination of fractured surfaces, no differences of findings of primed dentin surface between the groups with and without remoisturization with benzal konium chloride solution. FT-IR spectroscopy taken from the control and the experimental group reve::.led that some higher absorbance derived from the primers binding to dentin surface was seen at the group pretreated with 0.1 % benzal konium chloride solution than at the control group of remoisturizing with water.

• Korean Journal of Agricultural Science
• /
• v.36 no.2
• /
• pp.199-209
• /
• 2009

For increasing the consumption of pear, the pear wines were made by using eight different kinds of yeast. The chemical properties, such as pH, acidity, ethanol and sugar contents, and the consumer acceptance of various pear wines were analyzed. In analysis result of chemical properties, the value of pH was decreased and the acidity was increased until few days, and then retained during fermentation. The ethanol content was increased and the sugar content was decreased during fermentation. The pear wine brewed by B yeast (Lalnin, Saccharomyces cerevisiae) among eight different kinds of yeast had the highest content of ethanol, also this wine was represented the most consumer acceptance by the panels who consist of two age groups such as 20's to 30's and 50's to 60's. Therefore, we chose the yeast B for analyzing the effect of additives during fermentation. As the additives, the $K_2S_2O_5$ and ammonium phosphate as the disinfectant and hemicellulase and pectinase as fermenting conditioner were added into the pear wine brewed by yeast B. When additives are added, the chemical properties were the same as followed. Te values of pH was lower than when additives were not added(control). The acidity was he highest when ammonium phosphate was added, but the acidity was not changed after 4 day fermentation. Sugar contents when added $K_2S_2O_5$ 350ppm was shown the fastest deceasing, and it was orderly decreased as control, ammonium phosphate, hemicellulase, pectinase, and $K_2S_2O_5$ 175ppm. The decreasing rate of sugar content of these 6 test groups during fermentation gradually decreased without a big changes and the after 7 day fermentation, sugar contents were seldom decreased and the final sugar content was $9.5{\sim}9.8^{\circ}Brix$. In terms of change of the content of ethanol, all test groups generated 11~12.4% ethanol after 7 day fermentation. The group where ammonium phosphate was added generated 12.4% alcohol, which is the fastest speed and the group, which hemicellulase additive was added, showed generally slow alcohol generation rate. In terms of ethanol contents, the non-additive group and $K_2S_2O_5$ additive group showed 0.05%, which is very low, and hemicellulase and pectinase additive group is more than 0.5% which is rather high.