• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 춘계학술발표회논문집(1)
• /
• pp.131-136
• /
• 1996

An analytic nodal expansion method has been derived for the multigroup neutron diffusion equation in 2-D cylindrical(R-Z) coordinate. In this method we used the second order Legendre polynomials for source, and transverse leakage, and then the diffusion eqaution was solved analytically. This formalism has been applied to 2-D LWR model. $textsc{k}$$_{eff}$, power distribution, and computing time have been compared with those of ADEP code(finite difference method). The benchmark showed that the analytic nodal expansion method in R-Z coordinate has good accuracy and quite faster than the finite difference method. This is another merit of using R-Z coordinate in that the transverse integration over surfaces is better than the linear integration over length. This makes the discontinuity factor useless.s.

• 터널과지하공간
• /
• 제25권1호
• /
• pp.86-96
• /
• 2015

본 연구에서는 암반비탈면의 성능기반 평가방안을 개발하기 위해 델파이 기법을 이용하여 성능별 평가항목을 도출하였으며, 요인분석을 통해 최종 평가항목의 타당성을 검증하였다. 비탈면의 성능은 상태건전성, 안전성 그리고 내구성으로 분류하였다. 델파이 조사를 통해 상태건전성에는 절리방향, 배수조건 등 17개의 평가항목이 도출되었으며, 안전성에는 낙석발생 가능성, 인명피해 규모 등 4개의 평가항목이 도출되었다. 내구성에는 풍화도를 포함한 3개의 평가항목이 도출되었다. 델파이 조사를 통해 도출된 24개의 평가항목에 대해 탐색적 요인분석(EFA)을 실시한 결과, 24개의 평가항목 모두 타당성을 확보하고 있는 것으로 나타났다. 또한, 탐색적 요인분석 결과에 따라 3가지의 성능유형을 내적 상태건전성, 외적 상태건전성, 위험도, 피해도 그리고 지반 및 보호/보강시설의 내구성으로 세분류하였다.

• 한국지반공학회논문집
• /
• 제19권4호
• /
• pp.33-41
• /
• 2003

연구대상 사면은 충북 보은군 보은읍 도로공사구간 내의 절취사면으로 절취시공 후 암반사면내의 일부 구간에서 평면파괴로 인한 사면 붕괴가 발생하였다. 이 구간에서는 파괴면과 유사한 방향성을 갖는 불연속면이 암반사면 내에 다수 분포하여 추가 붕괴가 예상되는 불안정한 상태이다. 따라서, 본 사면에 대하여 암반사면의 안정성 해석에 보편적으로 사용되는 SMR, 평사투영법, 한계평형법 및 수치해석 등의 기법을 이용하여 사면의 안정성을 해석하였다. 사면의 안정성평가에 보편적으로 사용되는 한계평형법은 간단한 계산에 의해 사면의 안정성을 평가할 수 있는 장점이 있으나 파괴 활동면을 가정할 수 없는 단일 안전율에 의해 전체 사면의 안정성을 평가하는 단점이 있다. 따라서, 본 연구에서는 개별절리를 고려하여 사면의 안정성을 평가하는 전단강도 감소기법으로부터 안전율을 계산하였으며, 이를 한계평형해석의 결과와 비교ㆍ분석하였다. 또한 본 사면내에 지하수 영향을 고려하고 보강공법을 적용하여 종합적인 안정성을 검토하였다.

• 한국지구과학회지
• /
• 제25권2호
• /
• pp.109-114
• /
• 2004

중력 포텐셜의 해석에 웨이브렛 변환 방법을 적용하였다. 웨이브렛을 만드는 단계 함수가 제안되었다. 단계 함수는 중력 포텐셜에서의 그린 함수로 대치될 수 있음이 보여졌다. 상향연속은 단계함수와의 컨볼루션 곧 웨이브렛 변환으로 표현될 수 있다. 단계인자는 높이 변화를 나타낸다. 다중경계는 각 단계에서의 웨이브렛 변환치의 국부 최대값을 연결하여 구해지며 이는 지층의 불연속면을 나타낸다. 다중경계 방법을 마산 창원지역의 중력자료에 적용하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.220-225
• /
• 2004

The mesh-insensitive structural stress procedure by Dong is modified to apply to the welded joints with local thickness variation and inignorable shear/normal stresses along local discontinuity surface. In order to make use of the structural stress based K solution for fatigue correlation of welded joints, a proper crack growth model needs to be developed. There exist some significant discrepancies in inferring the slope or crack growth exponent in the conventional Paris law regime. Two-stage crack growth model was not considered since its applications are focused upon the fatigue behavior in welded joints in which the load ratio effects are considered negligible. In this paper, a two-stage crack growth law considering high mean loading is proposed and proven to be effective in unifying the so-called anomalous short crack growth data.

• 동력기계공학회지
• /
• 제13권4호
• /
• pp.11-17
• /
• 2009

This paper deals with the effects of pulsating flow on volumetric efficiency, which may be generated during the gas exchange procedure, due to piston motion, valve event on intake and exhaust stroke and unsteady flow of turbocharger of a three-cylinder four stroke turbo-charged diesel engine. Consequently, volumetric efficiency affects significantly the engine performance; torque characteristics, fuel economy and further to emission and noise level. As the expansion ratio became larger the engine speed varies and torque increases, the pressure pulsation in an exhaust gas pipe acts as an increasing factor of intake air charging capacity totally. The phase and amplitude of pressure pulsation in the intake system only affects volumetric efficiency favorably, if it is well matched and tuned effectively to the engine. Thus, to verify the exact phase and amplitude of the pressure variation is the ultimate solution for the air-flow ratio assessment in the intake stroke. Some experimental results of pressure diagrams in the intake pipe and gas-flow of turbine in-outlet are presented, under various kinds of operating condition.

• Journal of Welding and Joining
• /
• 제33권4호
• /
• pp.50-56
• /
• 2015

In general, discontinuity of metallurgical and structural points of weld zone could decline the fatigue strength. For the lightweight trend, the AHSS application in automotive chassis is in-progress. However, there are few research reports on AHSS welds fatigue strength in especially automotive chassis parts. Therefore, in this study, we evaluated the effects of the factors affecting the AHSS welding fatigue strength. As the result, the stress concentration of weld bead is the most important factor for welding fatigue strength. For the enhancement of welding fatigue strength, we focused on reducing the stress concentration of the welding beads. So, we applied and proved the plasma welding process and GTAW (Gas Tungsten Arc Welding) dressing method. It was verified by uniaxial fatigue specimen, fatigue performance increased from 40 to 60% by applying TIG dressing method compared to the conventional GMAW (Gas Metal Arc Welding). These results could be recommended the enhancement of fatigue performance of AHSS.

• Computers and Concrete
• /
• 제20권3호
• /
• pp.329-338
• /
• 2017

A new simple and practical strut-and-tie model (STM) for predicting the shear strength of RC pile caps is proposed in this paper. Two approaches are adopted to take into account the concrete softening effect. In the first approach, a concrete efficiency factor based on compression field theory is employed to determine the effective strength of a concrete strut, assumed to control the shear strength of the whole member. The second adopted Kupfer and Gerstle's biaxial failure criterion of concrete to derive the simple nominal shear strength of pile caps containing the interaction between strut and tie capacity. The validation of these two methods is investigated using 110 RC pile cap test results and other STMs available in the literature. It was found that the failure criterion approach appears to provide more accurate and consistent predictions, and hence is chosen to be the proposed STM. Finally, the predictions of the proposed STM are also compared with those obtained by using seven other STMs from codes of practice and the literature, and were found to give better accuracy and consistency.

• 대한기계학회논문집
• /
• 제17권2호
• /
• pp.359-370
• /
• 1993

Up to now, most studies are on interface crack problems in isotropic-isotropic dissimilar materials, but it seems to be not so much on anisotropic dissimlar materials. In this study, the stress intensity factors for an interface crack in anisotropic dissimilar materials are analysed using author's proposed extrapolation method by BEM and we have done a parametric study about material properties or shapes of crack affecting to the stress intensity factors. However, as there are not other's comparable numerical results on these anisotropic dissimilar materials to the best of author's knowledge, the reliability of the present results was proved by following two methods. The first is considering the asymptotic characteristic about stress intensity factors for an interface crack in anisotropic materials when the ansiotropic material approachs to the isotropic material. The second is considering the discontinuity of stress intensity factors between of a crack in an identical homogeneous anisotropic material and an interface crack in anisotropic dissimilar materials.

• 한국CDE학회논문집
• /
• 제21권2호
• /
• pp.130-142
• /
• 2016

BIM library, as a systematic collection of BIM objects where the building information is stored, is a vital factor to construct the BIM based work environment. However, construction business is faced the problems relating BIM library such as the absence of the standard for establishing BIM library, the discontinuity of BIM library's compatibility and the lack of practice applicable BIM library. These problems cause the decreasing work efficiency and the recreating BIM model, by delivering inefficient information required in each stage and application field. The purpose of this study is to suggest the integrated management system for property information of BIM library in order to minimize the reworking and to manage information of each stage and application field when exchanging and sharing information. To achieve this, the BIM information classification, the criteria of property requirements for information exchange in BIM application field and the BIM library management system are developed. This study could contributes to ensuring the reliability and accuracy of results of BIM based analysis and to enhancing the speed of business process with sharing and exchanging building information utilizing a single BIM model.