• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.505-505
• /
• 2017

최근 하천의 유량측정에 있어서 ADCP(Acoustic Doppler Current Profiler)의 빈도와 활용범위가 점차적으로 증가하고 있다. 국토교통부의 유량측정을 전담하고 있는 유량조사사업단에서는 최근 저평수기 유량측정은 물론, 중고수위 유량측정에서도 기존 유량측정방법의 단점을 보완하기 위해 ADCP 이동보트법을 적극적으로 활용하고 있다. 현재 ADCP 이동보트법으로 측정된 유량은 제조업체에서 제공되는 소프트웨어로 산정되며 크게 두 가지 문제를 초래하고 있다. 첫째, 제조업체에서 제공한 소프트웨어는 자동으로 품질평가를 할 수 있는 기능이 제한적이고, 사용자가 측정자료를 검토하기 위해 제공되는 표와 그래프 등의 정보가 제조업체마다 일관적이지 않다. 따라서, 측정자료의 품질평가는 측정한 ADCP에 종속되고 제조업체에서 제공된 소프트웨어 기능에 한정되어 효율적인 평가는 저해되고, 일관적이지 못한 결과를 초래하여 측정자의 책임이 증가되고 있다. 둘째, 제조업체에서 제공되는 소프트웨어가 자료의 처리 및 유량 계산에 대한 상이한 알고리즘을 사용하여 제조업체가 다른 ADCP로 동시에 측정된 유량이 서로 다른 결과로 나타나 혼란을 주고 있다. 이러한 이유로 USGS(U.S.Geological Survey)에서는 ADCP를 이용한 이동보트법 측정유량 처리에 대한 소프트웨어인 QRev를 개발하였으며, 일관적이고 효율적인 자료 처리와 계산이 이루어지도록 하고 있다. 본 연구에서는 유량조사사업단에서 수행한 ADCP 이동보트법 측정유량 자료에 대하여 QRev를 이용한 자료의 처리 결과에 대하여 분석하였다. 특히, ADCP로 측정이 불가능한 수면 및 하상 영역에 대한 외삽방법들의 적용 결과 및 제조업체의 기본 설정 값들에 대한 결과를 비교함으로서 QRev에 대한 향후 국내 활용 방향을 제시하고자 한다.

• Journal of the Korean Solar Energy Society
• /
• v.37 no.4
• /
• pp.23-33
• /
• 2017

A great deal of study for loss reduction of photovoltaic system is conducted currently. It is hard to distinct the fault of photovoltaic system with the naked eye. For that reason, it is essential to repair and maintain the PV system by monitoring the system. The fault of individual modules can cause the huge loss of the entire system because of the mismatch. Therefore, the method of diagnosing the PV array is necessary by measuring the multi-channel arrays simultaneously. In this paper, it is presented the method of measuring I-V curve of multi-channel arrays simultaneously by using the charge and discharge characteristics of capacitor. Generated DC power at PV arrays is charged and discharged at the capacitors in a moment. By measuring the charged voltage and current, it is possible to diagnose of performance of PV arrays.

• Journal of Radiation Protection and Research
• /
• v.46 no.3
• /
• pp.106-111
• /
• 2021

Background: Crookes tube is utilized in junior high and high schools in Japan to study the character of electrons and current, and not for radiological education. There is no official guideline or regulation for these radiation source to the public. Therefore, most teachers have no information about the leakage of X-rays from Crookes tube. The peak energy of X-rays is approximately 20 keV, and it is impossible to measure using conventional survey meters. Materials and Methods: Each leakage dose of low energy X-rays from 38 Crookes tube in the education field, such as junior and senior high schools in Japan, was explored by the teachers in the school using radio-photoluminescence (RPL) dosimeters. Before and after the measurements, the dosimeters were sent by postal mails. Results and Discussion: At the exploration in this study, it was estimated that the 70 ㎛ dose equivalent, H_p(0.07) of X-rays from 31 Crookes tubes were smaller than 100 µSv in 10 minutes, at the distance of 1 m, where the Crookes tube was usually observed. However, the highest dose was estimated as 0.69 mSv by an equipment with the full power. Furthermore, one Crookes tube exhibited 0.62 mSv with minimum output power of the induction coil. This relatively large dose was reduced by the shorter distance of discharge electrodes of the induction coil. Conclusion: The leakage dose of low energy X-rays from 38 Crookes tube was explored using RPL dosimeters. It was estimated that the H_p(0.07) of X-rays from 31 Crookes tubes were smaller than 100 µSv in 10 minutes at the distance of 1 m, while some equipment radiated a higher dose. With this study, the provisional guideline for the safety operation of Crookes tube is established.

• Journal of Gastric Cancer
• /
• v.19 no.1
• /
• pp.72-82
• /
• 2019

Purpose: Despite its clinical benefits, enhanced recovery after surgery (ERAS) is less widely implemented for gastric cancer surgery. This nationwide survey investigated the current status of the implementation of ERAS in perioperative care for gastric cancer surgery in South Korea. Materials and Methods: This survey enrolled 89 gastric surgeons from 52 institutions in South Korea. The questionnaire consisted of 24 questions about the implementation of the ERAS protocols in the management of gastric cancer surgery. The survey was carried out using an electronic form sent via email. Results: Of the 89 gastric surgeons, 58 (65.2%) answered that they have knowledge of the concept and details of ERAS, 45 (50.6%) of whom were currently applying ERAS for their patients. Of the ERAS protocols, preoperative education (91.0%), avoidance of preoperative fasting (68.5%), maintenance of intraoperative normothermia (79.8%), thromboprophylaxis (96.5%), early active ambulation (64.4%), and early removal of urinary catheter (68.5%) were relatively well adopted in perioperative care. However, other practices, such as avoidance of preoperative bowel preparation (41.6%), provision of preoperative carbohydrate-rich drink (10.1%), avoidance of routine abdominal drainage (31.4%), epidural anesthesia (15.9%), single-dose prophylactic antibiotics (19.3%), postoperative high oxygen therapy (36.8%), early postoperative diet (14.6%), restricted intravenous fluid administration (53.9%), and application of discharge criteria (57.3%) were not very well adopted for patients. Conclusions: Perioperative management of gastric cancer surgery is largely heterogeneous among gastric surgeons in South Korea. Standard perioperative care based on scientific evidence needs to be established to improve the quality of surgical care and patient outcomes.

• Korean Journal of Materials Research
• /
• v.29 no.9
• /
• pp.519-524
• /
• 2019

Spherical $Li_3V_2(PO_4)_3$ (LVP) and carbon-coated LVP with a monoclinic phase for the cathode materials are synthesized by a hydrothermal method using $N_2H_4$ as the reducing agent and saccharose as the carbon source. The results show that single phase monoclinic LVP without impurity phases such as $LiV(P_2O_7)$, $Li(VO)(PO_4)$ and $Li_3(PO_4)$ can be obtained after calcination at $800^{\circ}C$ for 4 h. SEM and TEM images show that the particle sizes are $0.5{\sim}2{\mu}m$ and the thickness of the amorphous carbon layer is approximately 3~4 nm. CV curves for the test cell are recorded in the potential ranges of 3.0~4.3 V and 3.0~4.8 V at a scan rate of $0.01mV\;s^{-1}$ and at room temperature. At potentials between 3.0 and 4.8 V, the third $Li^+$ ions from the carbon-coated LVP can be completely extracted, at voltages close to 4.51 V. The carbon-coated LVP exhibits an initial specific discharge capacity of $118mAh\;g^{-1}$ in the voltage region of 3.0 to 4.3 V at a current rate of 0.2 C. The results indicate that the reducing agent and carbon source can affect the crystal structure and electrochemical properties of the cathode materials.

• Korean Chemical Engineering Research
• /
• v.57 no.3
• /
• pp.408-412
• /
• 2019

In this study, nitrogen doped carbon felt was prepared by pyrolysis of urea at high temperature and applied as an electrode for vanadium redox flow cell. Urea is easier to handle than ammonia and forms $NH_2$ radicals at higher temperatures, creating a nitrogen functional group on the carbon surface and acting as an active site in the vanadium redox reaction. Therefore, the discharge capacity of activated carbon felt electrodes using urea was 14.9 Ah/L at a current density of $150mA/cm^2$, which is 23% and 187% higher than OGF and GF, respectively. These results show the possibility that activated carbon felt electrode using urea can be used as electrode material for redox flow battery.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.3
• /
• pp.229-235
• /
• 2021

To dispose of waste, there are methods such as landfill, incineration, recycling, and sea discharge. Since the landfill wastes accumulate, there is a limit to the landfill site to accommodate them. In this paper, a time series analysis and current status of landfill allowance was analyzed over 20 years of landfills distributed throughout the country using GIS to understand the status of waste reclamation. As a result, the emissions of waste were gradually increasing, and as the emissions increased, the amount of landfill increased. The landfills in the Seoul metropolitan area have been saturated and need to be resolved as soon as possible.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.14 no.1
• /
• pp.91-97
• /
• 2021

ISO/IEC 15118 is an international communication standard for EV(electric vehicle)'s V2G implementation. In the charging/discharging control of an EV based on a communication protocol, there is inevitably a time delay when charging/discharging occurs, and the delay may limit in supplying power flexibility. In this paper, we implemented an ISO/IEC 15118-based V2G emulator and measured the charge/discharge response characteristics. As a result, the time delay appeared as 0.12ms. Accordingly, the power flexibility markets that EV can participate in under the current standard were explored.

• Journal of Korean Society on Water Environment
• /
• v.27 no.4
• /
• pp.542-550
• /
• 2011

Changes of suspended sediment concentration in the Seomjin river estuary located in south sea of the Korea peninsula were investigated during the spring tide in autumn (i.e. 25 hours in October) 2000 and winter (i.e. 25 hours in February) 2001. The changes of temperature and salinity during the spring tide in October 2000 showed larger variations than the those in February 2001. During the spring tide in October 2000, currents at bottom layer were observed to be stronger than during the spring tide in February 2001, showing that both of the two periods had ebb currents-predominant tide asymmetries. The suspended sediment concentrations in October 2000 were larger than the those in February 2001. At the time of the maximum of tide currents or after about one hour of the maximum during the autumn months, the suspended sediment turbidity was observed to be maximum. Another observation station at Hadong upstream from the Seomjin river estuary showed about one hour delay in tide phase, Thereby, the suspended sediment concentration showed high turbidity after two hours at bottom and three hours at surface layer, in particular, in October 2000. This results can be explained by the facts that river discharge increased significantly after the summer rainy season, causing also increase of erosion processes by strong current velocity at bottom layer.

• Particle and aerosol research
• /
• v.18 no.1
• /
• pp.1-8
• /
• 2022

Since 2019, the corona virus has been continuously affect human life. In particular, in the indoor space where people live, infection by airborne transmission of viruses is a problem. Among them, the spread in the subway, which is the main mode of transport for humans, can be serious. To solve this problem, our research team developed an ionic wind collector to collect and remove corona virus using an ionic wind collector and ozone. In order to apply the ionic wind collector to the subway, it must operate in two modes. Because large amounts of ozone are harmful to the human body. There is a mode that collects bio-aerosol from the air using ionic wind and a mode that inactivates viruses floating in the air by generating a large amount of ozone. As the applied voltage increased, the cleaning ability of the ionic wind collector increased, and the farther the distance between the discharge electrode and the ground plate, the higher the cleaning ability even at low current. In addition, clean air delivery rate (CADR) of an ionic wind collector was up to 5.5 m³/min. As a result of measuring the amount of ozone generated, it was confirmed that 50 ppb to 250 ppb was generated, and it was confirmed that ozone generation was controllable in the ionic wind dust collector.