• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2001년도 총회 및 춘계학술발표회
• /
• pp.111-115
• /
• 2001

Durability of tunnel drains is important, because the accumulation of groundwater around the tunnel due to clogging of filter or reduction of discharge capacity of drain causes reduction of the life time of tunnel linings. In this paper, clogging and discharge capacity of drain and filter of tunnels are evaluated using a gradient ratio test and filter design criteria. The results of the gradient ratio test showed that gradient ratio(GR) is high when fine content is high in the soil samples and equivalent opening size(EOS) of filter materials is small. Measured GR was less than allowable critical gradinet ratio : 3.0, which is the clogging criteria of U.S. Army Corps of Engineers.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 1999년도 제1회 학술대회논문집(KIASC 1st conference 99)
• /
• pp.26-29
• /
• 1999

Superconducting $YBa_{2}$$Cu_{3}$ $O_{7-x}$(YBCO) thin films were deposited on MgO(100) substrates using a hollow cathode discharge sputtering system. Influence of the sputtering conditions such as substrate temperature and discharge sputtering gas pressure on electrical and structural properties were investigated. It was found that YBCO thin films with zero resistance temperature higher than 85 K were obtained to the pressure 200 mToorr(Ar/O2=0.9), substrate temperature of $760^{\circ}C$, and target-substrate distance of 10 mm during film deposition. Homogeneous large area YBCO films with 2 inch diameter were also sucessfully fabricated by this method.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1272-1275
• /
• 2008

We present the development of dry etch process for the liquid crystal display (LCD) fabrication using a dielectric barrier discharge (DBD) system at atmospheric pressure. In this experimental work, the dry etch characteristics and the electrical properties of thin film transistor are evaluated by using the scanning electron microscopy and electric probe, and TFT-LCD panel ($300\;mm\;{\times}\;400\;mm$) is manufactured with the application of the amorphous silicon etch step in the 4 mask and 5 mask processes.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 추계학술대회 논문집 학회본부
• /
• pp.142-144
• /
• 1989

Triggering characteristics of a trigatron spark gap have been studied by measuring self-emission UV light. By combining the measurement of the UV light with that of the trigger gap voltage and the lain discharge current, we distinguished clearly the differences between the trigatron operations in which the lain discharge occurs after the trigger discharge in the case of sale polarity between the trigger pin and the lain electrode at the opposite side, and the lain gap breakdown takes place before the formation of the trigger spark in the case of different polarity. We show the observation of UV radiation with the other electromagnetic measurements is a simple and reliable scheme to investigate the triggering properties of the trigatron spark gaps.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.240-243
• /
• 2002

Carbon nitride films have been deposited on Si(100) substrate by a high voltage discharge plasma combined with laser ablation in a nitrogen atmosphere. The films were grown both with and without the Presence of an assisting focused Nd:YAG laser ablation. The laser ablation of the graphite target leads to vapor Plume plasma expending into the ambient nitrogen arc discharge area. X-ray photoelectron spectroscopy and Auger electron spectroscopy were used to identify the binding structure and the content of the nitrogen species in the deposited films. The surface morphology of the films was studied using a scanning electron microscopy Data of infrared spectroscopy and x-ray photoelectron spectroscopy indicate the existence of carbon-nitrogen bonds in the films. The x-ray diffraction measurements have also been taken to characterize the crystal properties of the obtain films.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 D
• /
• pp.1511-1513
• /
• 1998

The purpose of this study is to research and develop PEO/PVDF electrolytes and $LiMn_2O_4$ composite cathode for all-solid state lithium rechargeable battery. We investigated AC impedance response and charge/discharge cycling of $LiMn_2O_4$/SPE/Li cells. The cell resistance was decreased so much initial charge process from 0% SOC to 100% SOC. The radius of semicircle of $LiMn_2O_4$/SPE/Li cell was so much from initial state to 20th cycling. The discharge capacity of the $LiMn_2O_4$ composite cathode was 144mAh/g based on $LiMn_2O_4$.

• 한국전기전자재료학회논문지
• /
• 제26권9호
• /
• pp.656-661
• /
• 2013

In this study, the moisture content, charge discharge current, electrostatic capacity and dielectric loss tangent are measured for the specimen of bisphenol type epoxy resin which is mixed with squared amorphous silica filler and dipped in hot water of $50^{\circ}C$ for 169 days. The results of this study are listed below. The longer of deposition day, the charge and discharge current was increased. It is considered that the reason is because there was water attack through the squared silica surface. The longer of deposition day, the absorption rate of all specimens was increased. It found that the absorption rate reached saturated state after 100 days. The higher frequency and the longer of deposition day, the $tan{\delta}$ was decreased. Also, It found that the $tan{\delta}$ and electrostatic capacity of the specimen which is mixed with squared filler are greater.

• 한국세라믹학회지
• /
• 제37권2호
• /
• pp.128-133
• /
• 2000

In this work, soft carbons produced by pyrolysis of petroleum and coal-tar pitch were used as the negative electrode for Li-ion batteries. We studeid the charge/discharge capacity and the interfacial reaction of these electrodes by constructing a half cell. Charge/discharge property was studied by a constant-current step and the interfacial reaction between the electrolyte and the surface of a carbon electrode was studied by the cyclic voltammetry. The initial charge/discharge capacity for the coal-tar pitch carbon increased exceedingly with the heat treatment temperature. On hte other hand, the capacity of the petroleum pitch carbon increased with temperature up to 1000$^{\circ}C$, thereafter decreased continuously. While the charge capacity decreased with the cycle number, the reversibility increased above 90%. In addition, the thermal stability and crystallization of petroleum and coal-tar pitches were analyzed by TGA and XRD, respectively.

• 한국재료학회지
• /
• 제9권2호
• /
• pp.195-198
• /
• 1999

The newly designed Ac-PDP(plasma display panel with comb-type electrode) structure was fabricated by using the screen printing method and the electrical and optical characteristics were measured under the various discharge conditions. The minimum firing voltages measured under pure Ne and Ne+Xe mixture gas with the application of 10 kHz square wave were 190V and 160V, respectively. The firing voltages of the PDP cell with the comb-type electrode were compared with those of the cell with matrix electrode under the same discharge condition. The firing voltage of the PDP cell with comb-type electrode was 15 V lower than that of the PDP cell with conventional matrix electrodes.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.583-585
• /
• 2002

The effects of phosphor properties such as the granular sizes and shape on the crosssectional shape of phosphor layer and plasma discharge characteristics for improving the luminance and luminous efficiency in ac PDP have been investigated. As the granular size decreases, the thickness of vertical side of barrier rib in blue cell decreases, and wheras the thickness of bottom side increases due to increased dispersibility. In addition, the phosphor with round granular shape showing good dispersibility shows better voltage margin and higher luminous efficiency due to their improved discharge volume and packing density.