• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 A
• /
• pp.194-196
• /
• 1999

This paper verifies that DSPSRM having the rotor pole of "ㅓ" shape has a radial and axial flux distribution, and analyzes the flux density distribution of each direction using 3D FEM.

• Bulletin of the Korean Chemical Society
• /
• 제35권4호
• /
• pp.1001-1004
• /
• 2014

We have synthesized disc-like large silver nanomaterials that have nanostructured bumps on the surface using smaller nanoplate seeds. The size and shape of the bumpy nanostructures are rationally controlled by changing the concentrations of nanoplate seeds, silver ion, reductant, and citrate ion. Importantly, the synthetic mechanism of these bumpy nanostructures is remarkably similar to that of the conventional seed-mediated growth based on tiny seeds. We have further investigated the catalytic properties of the bumpy nanostructures for the reduction of 4-nitrophenol, which is associated with a concomitant color change from yellow to colorless.

• 한국공작기계학회논문집
• /
• 제14권6호
• /
• pp.117-124
• /
• 2005

This study developes the vibration model to estimate the vibration energy of compact disc player's mainbase assembly which is supported by dampers and springs, and this model is verified by experiment. From frequency response function, we investigate the natural frequency and mode shape in the up/down direction for mainbase assembly. In order to determine the analysis frequency band, we investigate the excitation frequency of road from the vehicle test. As the characteristics of dampers and springs are changed, we carry out the sensitivity analysis of vibration energy for mainbase assembly which include optical pick-up and feeding system. And we found out that the properties of damper were dominant element in the vibration energy of mainbase assembly's CG(center of gravity).

• 한국생산제조학회지
• /
• 제19권3호
• /
• pp.414-418
• /
• 2010

Due to the increasing demand for carious methodologies to improve the quality of products were introduced. A Brush the most frequently used type of grinding process is one of the deburring. in order to produce consistent burr shape, various machining conditions have been combined and applied to disk grinding process. Between the workpiece and the grinding disc to earn depends on the angle of the slope has been observed. Drastic increase of tool wear has been also observed along the inclination angle variation. Various burr shapes have been captured and analyzed using image processing technique.

• 한국해양공학회지
• /
• 제20권3호
• /
• pp.96-102
• /
• 2006

The butterfly valve has been used to control the switch and flux of fluid. While research about the characteristics of butterfly valve fluid have been done, study of the optimum design, considering structural safety, must keep pace with it. Thus, a method is proposed for an optimum butterfly valve. Initially, the stability of the butterfly valve, using FEM and CFD, is evaluated, and a variable is selected using the initial analysis results. Also, the shape optimization design is accomplished using the DACE model. In terms of research results, the experiment satisfied the objective and limitation functions.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.586-591
• /
• 2001

Dynamic analysis using impulse responses is formulated to estimate effect of slider rail shape on dynamic responses. Impulse responses are obtained on numerical nonlinear model including rigid motion of slider and fluid motion of air bearing under the slider. Dynamic characteristics of slider motion are evaluated by utilizing the decay ratio of impulse responses and modal frequencies from frequency response functions. The dynamic characteristics of the developed NFR(Near Field Recording) slider are checked by comparing those of HDD sider(Nutcracker). Also, sensitivities of slider position conditions and rotation speed on the dynamic characteristics are investigated. The researches show that the utilized method is a good indicator of designing the better slider.

• 대한치과기공학회지
• /
• 제4권1호
• /
• pp.5-7
• /
• 1982

This study was performed to examine the effect of repeated firing on porcelain color stability. Sixty sepcimens of generally uniform size and shape(9.7 12mm)were prepared using the manufactorer's specifications and among them 50 specimens that showed no defect after firing procedure were selected. All samples, abraded with sandpaper disc, ultrasonically cleaned, and air fired to amedium glaze were devided into 10 groups according to the number of repeated firing and, upon completion, mounted on a 13 by 16cm board. 30 persons(five dentists, ten dental techanicians, and fiftheen students) were asked to compare the samples for variations, in hue, chroma and value under natural and artificial light. The results were as follows:(1) There were no color change detected in the first four firings.(2) Slight color change were noticed in subsequent firings(ie: greater decreases in value with slight increases In chroam)(3) However, the hue remained constant in all 10 groups after repeated firings.

• 복식문화연구
• /
• 제28권3호
• /
• pp.356-375
• /
• 2020

The purpose of this study is to understand the characteristics and cultural values of the headdress among Chinese minorities with diverse ethnic cultures, and to provide various data on the design of clothing accessories. Theoretical considerations about ethnic minorities were addressed through literature and prior research, with data being collected using literature and websites. The results are as follows. First, the most common type of headdress is the horizontal type, which includes the head style, headband, and head scarf. The second most common is the cylinder type, which is a headdress with variations in the shape of a round hat, and has is evident among various minorities. Third, the pagoda type is decorated with ornaments mounted on top of a round shape. Fourth, the square crown type is a piece of wood as a material for a form of the material and for a variety of jewelry and the production of up to meet the women's head of the jewelry. Fifth, head belt-type ornaments consist of a headband and fancy bead ornaments from the bottom of the head. Mongol women usually wear an exaggerated form of this type. Sixth, the head cover type is a head decoration influenced by the dress code of Muslim women. Seventh is the disc type of crown shape worn by the Dai. Next, the ogival type is a cone-shaped headdress hat most commonly seen as head ornament hat among the Dai. Lastly, the sailboat type is the most exaggerated form of hair ornaments found among ethnic minorities.

• 한국전산유체공학회지
• /
• 제18권4호
• /
• pp.74-81
• /
• 2013

A numerical design analysis is conducted to search for an optimal shape of outlet in a rotating-disk CVD reactor. The goal is to suppress flow recirculation that has been found in a reactor having a sudden expansion of flow passage outside of the rotating disk. In order to streamline gas flow, the sidewall at which the flow in the Ekman layer is impinged, is tilted. The axisymmetric laminar flow and heat transfer in the reactor are simulated using the incompressible ideal gas model. For the conventional vertical sidewall, the flow recirculation forming in the corner region could be expanded into the interior to distort the upstream flow. The numerical results show that this unfavorable phenomenon inducing back flow could be dramatically suppressed by tilting the sidewall at a certain range of angle. The assessment of deviation in deposition rate based on the characteristic isotherm illustrates that the sidewall tilting may expand the domain of stable plug-like flow regime toward higher pressure. A physical interpretation is attempted to explain the mechanism to suppress flow recirculation.

• International Journal of Oral Biology
• /
• 제34권1호
• /
• pp.37-42
• /
• 2009

The attachment and adhesion of RAW 264.7 and MC3T3-E1 cells to titanium (Ti) discs with various degrees of roughness was investigated. The attachment, adhesion, and proliferation of these cells were evaluated after 4 hr, 24 hr and 7 day incubations. Both RAW 264.7 and MC3T3-E1 cells showed a time-dependant correlation between attachment and adhesion on the surface of the titanium discs. Both types of cells tended to have higher survival rate on these discs as the surface roughness increased. The percentage of adherent inflammatory RAW 264.7 cells was greater than MC3T3-E1 cells at 24 hr, but this was reversed at 7 days in culture. The morphology of osteoblastic MC3T3-E1 cells at 24 hr, determined using a surface emission microscope (SEM), appeared flattened and spread out while inflammatory RAW 264.7 cells were predominantly spherical in shape. The adhesion of both cell types on the titanium discs was dependant on the levels of fibronectin adsorbed on the disc surface, indicating that serum constituents modulate the efficient adhesion of these cells. Our data indicate that the cellular response to the titanium surface is dependent on the types of cells, surface roughness and serum constituents.