• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.55 no.1
• /
• pp.82-93
• /
• 2019

The International Labor Organization (ILO) selected fishing as the most dangerous group of jobs in the world, and it is well known in Korea as a 4D industry. Offshore large purse seine accounts for the largest portion of the fishing industry in the coastal region with high death rate and the accident rate. The repeated disaster rate survey by the Korea Maritime Institute (KMI) shows offshore large purse seiner is the highest at 22.3 percent and coastal gill nets and offshore stow net are following at 12.4 percent and 11.9 percent in order. Therefore, risk factors occurring in offshore large purse seiners were analyzed based on data from the National Federation of Fisheries Cooperatives (NFFC) for three years from 2015 to 2017 and 4M (Man, Machine, Media, Management) 3E (Engineering, Education, Enforcement) techniques were used to provide a safe fishing environment. The number of accidents on offshore large purse seiners each year was more than 150, and the number of accidents on every fishing boats was as high as 17 percent in 2015. If the accident rate and the risk level were divided by insurance, the accident resulting from contact with machinery was the highest, and the risk of a contact with gear was low but frequently occurring. This was caused by collisions and contact with gear in situations where death and disappearance risk are not high, and accident types in situations where death and loss risk are considered to be contact with machinery, falls or other accidents. Through these analysis techniques, the frequency and risk of each type of accident on a offshore large purse seiners can be demonstrated, and it is expected to raise awareness of a safer fishing environment and contribute to the reduction of accidents.

• Ecology and Resilient Infrastructure
• /
• v.7 no.4
• /
• pp.308-319
• /
• 2020

In this study, the field applicability of the recently constructed multifunctional fishway in Seomunbo, Yeongcheon-si, and Gyeongsangbuk-do were examined. The analysis variables were R/C slab (S1) and R/C+S/C slab (S2), the underground passage standard areas (width × length) were 1.4 m × 0.2 m, 1.4 m × 0.3 m, and 1.4 m × 0.6 m, and the flow velocities were 0.8, 1.2, and 1.6 m/s. As a result of the analysis, the safety of the design of Seomunbo was evaluated. The analysis showed compared to the Seomoon Weir fishway, the maximum stress of S2 decreased by 24 - 32%, the bending moment of the underground passage decreased by 16 - 33%, the maximum stress of the sidewall decreased by 20 - 36%. In addition, the bending moment of the upper slab decreased by 17 - 33%, the maximum stress of the upper slab decreased by 9 - 28%, and the bending moment decreased by 19 - 33%. Complementation was required in the following percentages: 18% and 14% for the maximum stress and bending moment of the underground passage, respectively, 15% and 17% for the maximum sidewall stress and bending moment, respectively, and 11% and 16% for the upper slab maximum stress and bending moment, respectively. The results showed that S2 was superior to that of the Seomoon Weir fishway, and the underground passage size of 1.4 m × 0.3 m was superior to those of 1.4 m × 0.2 m and 1.4 m × 0.6 m, and R/C+S/C slab was superior to that of R/C slab. The findings are expected to be useful for constructing and designing the multifunctional fishway.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.10a
• /
• pp.145-149
• /
• 2004

It is necessary for managing a perfect process for degasing aluminum molten metal according to the increase of a grade of aluminum and its alloy products. There are some methods that have been used to manage a degasing process in recent years, such as an injection method that uses aluminum molten metal powder and chemicals supplier and input method that supplies argon and nitrogen, or chlorine gas by using a gas blow-tube. However, these methods show some problems, and it shows that it is a difficult process to handle. pollution due to the producing a lot of toxic gases like chlorine and fluoride gas. irregular effects, and lowering work efficiency due to the excessive processing time. The problems that are the most fatal are the producing a lot of sludge due to the reaction of aluminum molten metal with chemicals. loss of metals, and decreasing the life of refractory materials. In order to solve these problems. this paper develops a technology that is related to aluminum continuous casting molten metal and monolithic degasing apparatus. A degasing apparatus developed in this study improved the exist ing methods and prevented environmental pollution wi th smokeless. odor less, and harmlessness by using a new method that applies argon and nitrogen gas in which the methods used in the West and Japan are eliminated. The developed method can significantly reduce product faults that are caused by the production of gas and oxidation because it uses a preprocessed molten metal with chemicals. In addition. the amount of the produced sludge can also be reduced by 60-80% maximum compared with the existing methods. Then. it makes it possible to minimize the loss of metals. Moreover. the molten metal processing and settling time is also shortened by comparing it with the existing methods that are applied by using chemicals. In addition, it does much to improve the workers' health, safety and environment because there is no pollution. The improvement of productivity and prevent ion effects of disaster from the results of the development can be summarized as follows. It will contribute to the process rationalization because it does not have any unnecessary processes that the molten metal will be moved to an agitator by using a ladle and returned to process for degasing like the existing process due to the monolithic configuration. There are no floating impurities due to the oxidation caused by the contact with the air as same as the existing process. In addition. it can protect the blending of precipitation impurities. Because it has a monolithic configuration. it can avoid the use of additional energy to compensate the temperature decreasing about 60t that is caused by the moving of molten metal. It is not necessary to invest an extra facilities in order to discharge the gas generated from a degasing process by using an agitator. The working environment can be improved by the hospitable air in the factory because the molten metal is almost not exposed in the interior of the area.

• Journal of Wetlands Research
• /
• v.26 no.3
• /
• pp.227-235
• /
• 2024

Inland wetlands provide important ecosystem services or functions, including biodiversity conservation, water purification, flood control, and carbon sequestration. However, many inland wetlands are being degraded by urbanization and industrialization, raising the need for conservation and restoration. This study proposes the adoption of No Net Loss(NLL) of Wetland for wetland conservation and restoration in Korea by the review of the literatures. To this end,, we analyzed the wetland conservation and management systems of the United States, Canada, Germany, Japan, and Australia, and identified institutional features and success factors of each country, and sought ways to adapt them to domestic conditions of Korea. The case of the United States highlights the importance of legal frameworks and public-private collaboration, Canada demonstrates systematic management approaches, Germany maintains a balance between development and conservation, Japan underscores the need for cooperative conservation efforts, and Australia emphasizes the efficiency of offset markets. The introduction and operation of these schemes are expected to contribute to climate change mitigation, biodiversity conservation, and water quality improvement, but ongoing research and policy efforts are needed to ensure that the schemes are well established.

• Economic and Environmental Geology
• /
• v.51 no.2
• /
• pp.149-166
• /
• 2018

Many large earthquakes have continuously been reported and resulted in significant human casualties and extensive damages to properties globally. The accident of Fukushima nuclear power plant in Japan was caused by a mega-tsunami, which is a secondary effect associated with the Tohoku large earthquake (M=9.0, 2011. 3. 11.). Most earthquakes occur by reactivation of pre-existing active faults. Therefore, the importance of paleoseismological study have greatly been increased. The Korean peninsula has generally been considered to be a tectonically stable region compared with neighboring countries such as Japan and Taiwan, because it is located on the margin of the Eurasian intra-continental region. However, the recent earthquakes in Gyeongju and Pohang have brought considerable insecurity on earthquake hazard. In particular, this region should be secure against earthquake, because many nuclear facilties and large industrial facilities are located in this area. However, some large earthquakes have been reported in historic documents and also several active faults have been reported in southeast Korea. This study explains the evaluation methods of geological structures on active fault, fault damage zone, the relationship between earthquake and active fault, and respect distance. This study can contribute to selection of safe locations for nuclear facilities and to earthquake hazards and disaster prevention.

• Fire Science and Engineering
• /
• v.29 no.2
• /
• pp.25-32
• /
• 2015

The improved thermal stability and anti-oxidation properties of lyocell fiber were studied based on flame retardant treatment by using $Na_3PO_4$ solution. The optimized conditions of flame retardant treatment were studied on various concentrations of $Na_3PO_4$ and the mechanism was proposed through experimental results of thermal stability and anti-oxidation. The integral procedural decomposition temperature (IPDT), limiting oxygen index (LOI) and activation energy ($E_a$) increased 30, 160% respectively via flame retardant treatment. It is noted that thermal stability and anti-oxidation improved based on char and carbon layer formation by dehydrogenation and dissociation of C-C bond resulting the hindrance of oxygen and heat energy into polymer resin. The optimized conditions for efficient flame retardant property of lyocell fiber were provided using $Na_3PO_4$ solution and the mechanism was also studied based on experimental results such as initial decomposition temperature (IDT), IPDT, LOI and $E_a$.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.5
• /
• pp.669-674
• /
• 2023

This study examined the specific contents of social welfare policies of the Joseon Dynasty through the analysis of Mokminsimseo, Aemin Sixjo and Jinhwang Yukjo, and identified the connection between them and today's social welfare policies. As a result, In the Care of the People, it contained the basic contents of the Elderly Welfare Act and welfare services for the elderly, and in the Freedom, it included welfare policy services related to infants and children, and the value system of welfare for the disabled through government affairs. The policy direction was confirmed, and it was found that disaster relief calls for social integration in response to social crises and disasters. This also confirmed that major areas of social welfare policy such as family safety, income security, health policy, and social integration have been emphasized through social welfare policy indicators. In addition, through the analysis of Qinhwangyukjo, it was found that it contains not only the basic ideology and values of the social security system and social insurance system in terms of visa, scale, and power, but also the details of specific policy implementation. Today's social welfare policies and social service policies, which are equipped with social welfare facilities and are implementing systematic social welfare services for each target, were able to confirm their foundation through the Qinhwangyukjo. This confirms that the emphasis on social integration and income security is prominent in the Qinhwangyukjo through the social welfare policy indicators of the current policy system.

• Fire Science and Engineering
• /
• v.33 no.6
• /
• pp.87-94
• /
• 2019

Through a press release dated July 17, 2018, the Anti-Corruption and Civil Rights Commission recommended that the National Fire Agency develop preventive measures against fire in the "Indoor Archery Ground" and "Room Escape Café" etc., which were originally excluded from the category of "Publicly Used Establishments." This study developed the hierarchy of domains and indicators of measurement for fire risk assessment of the new business of publicly used establishments through the Delphi Method. It analyzed the goodness of fit scores (over 3.00) and secured an average score of 4.25. Using AHP analysis, the ratio of consistency for the domains of measurement of fire risk assessment was found to be 4.0%, which was lower than CR ≤ 0.1 (10%). The consistency of subsequent measurement indicators were distributed in the range of 0.1%~3.6%, and they were identified as being commonly consistent. The indicators of measurement appeared as follows in order of importance and priority: Type of Internal Passage of Establishment and Evacuation Capacity of Exit (0.316), Control of Ignition Source (0.141), Inherent Risk (0.106), Appropriateness and Adaptiveness of Fire Detection System (0.097), Control of Inflammables/Combustibles (0.084), Guides and Facilities helping Evacuation (0.075), Fire Resistant Structure and Finishing Materials (0.060), Compartmentalization and Emergency Exit (0.049), Risk of Fire Expansion (0.046), and Appropriateness and Adaptiveness of Fire Extinguishing Facilities (0.026). The findings of this study are expected to be expansively used as data for future research on the development of fire risk assessment indicators.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.19 no.1
• /
• pp.11-27
• /
• 2017

The road network system of major domestic urban areas such as city of Seoul was rapidly developed and regionally expanded. In addition, many kinds of life-lines such as electrical cables, telephone cables, water&sewerage lines, heat&cold conduits and gas lines were needed in order for urban residents to live comfortably. Therefore, most of the life-lines were individually buried in underground and individually managed. The utility tunnel is defined as the urban planning facilities for commonly installing life-lines in the National Land Planning Act. Expectation effectiveness of urban utility tunnels is reducing repeated excavation of roads, improvement of urban landscape; road pavement durability; driving performance and traffic flow. It can also be expected that ensuring disaster safety for earthquakes and sinkholes, smart-grind and electric vehicle supply, rapid response to changes in future living environment and etc. Therefore, necessity of urban utility tunnels has recently increased. However, all of the constructed utility tunnels are cut-and-cover tunnels domestically, which is included in development of new-town areas. Since urban areas can not accommodate all buried life-lines, it is necessary to study the feasibility assessment system for utility tunnel by urban patterns and capacity optimization for urban utility tunnels. In this study, we break away from the new-town utility tunnels and suggest a quantitative assessment model based on the evaluation index for urban areas. In addition, we also develop a program that can implement a quantitative evaluation system by subdividing the feasibility assessment system of urban patterns. Ultimately, this study can contribute to be activated the urban utility tunnel.

• Journal of Navigation and Port Research
• /
• v.39 no.1
• /
• pp.29-35
• /
• 2015

As the numbers of users of domestic passenger ships increased up to 14.5 millions at 2012, the numbers of ships accidents also increased as 2 times than ever. It will be very important to develop technologies related with safety design for onboard passengers and disclose the potential problems. This study performed consciousness survey on ordinary peoples' way finding who have not got any regular anti-disaster training, to develop evacuation models for evacuation feasibility studies. Followings are the results answered by 83 participants for 33 way finding questions. Respondents selected right ways more than 6~18% for 2 ways like T type, U type, Y type passages. But when there are some walkers and/or runners, respondents preferred to select the way where walkers or runners are. And more over the ratio of the ways that runners are on is comparatively higher than walkers. On 'ㅏ'type, 'ㅓ'type and 3 way type passages, even though the walkers and/or runners are affected to answerers, straight way were most preferred. And it is clear that peoples like bright passages. On the other hands, peoples responded as they like right, downward and near stairs more than left, upward and far stairs, respectively. and very few selected escalator and elevator for as evacuation stairs.