• Journal of the Korean housing association
• /
• v.13 no.2
• /
• pp.1-6
• /
• 2002

As a result of rapid economic and social change, the number of large-scale builing is expected to increase. In response to the growing increase, It will be a greater demand for up-to-date for heating and cooling, illumination, communication and disaster protection system as well as a sharp rise in overall energy consumption. Gradually the living of apartment building is increasing by growing population. In basic data will be offered for the energy conservation programs, and establishing some standards for the energy consumption in future. By understanding how energy sources are actually utilized in existing apartment houses, we can develop more appropriate strategies to maximize both the efficient use of energy and its conservation.

• International journal of advanced smart convergence
• /
• v.13 no.3
• /
• pp.328-334
• /
• 2024

This study uses Pathfinder software to simulate and analyze the safe evacuation of university dormitory occupants. Fire safety issues in densely populated dormitory buildings are gaining increasing attention, and improving emergency evacuation efficiency is crucial for reducing the harm caused by fire incidents. The study focuses on a student dormitory building in a university, simulating different evacuation scenarios and analyzing the impact of factors such as evacuation routes, personnel distribution, exit width, and stair width on evacuation time. Based on the actual dormitory conditions, parameters such as gender ratio, height range, shoulder width, and walking speed of the occupants were set, and evacuation times in various scenarios were compared.The simulation results show that proper planning of evacuation routes and increasing stair width significantly reduced evacuation times. The study recommends that universities establish systematic emergency response plans, conduct regular evacuation drills, optimize student dormitory layouts, and consider increasing stair width in dormitory building designs to improve evacuation efficiency and safety.

• Journal of Multimedia Information System
• /
• v.7 no.2
• /
• pp.147-156
• /
• 2020

The author Nakajima was involved in the field of disaster communications and emergency medical care as guest research scientist at the Fukushima Nuclear Accident Independent Investigation Commission established by the National Diet of Japan and reviewer of the Commission's report, and Kurokawa was the chairman of this Commission. Looking back over a decade, we are on the liability issue of bureaucrats and telecom operators, so it's becoming clear what was hidden at the time. The battery of NTT DoCoMo's mobile phone repeaters had a capacity of only about 24 hours, and communication failures increased after one day. The Government also failed to issue an announcement of "Vent from reactor" under the Telecommunications Act Article No. 129. This mistake lost the opportunity to use the third-party telecommunications (e.g. taxi radios). Furthermore, as a result of LASCOM (telecommunications satellite network for local governments via GEO) and a variety of unexpected communication failures, the evacuation order "Escape!" could not be notified to the general public well. As a result, the general public was exposed to unnecessary radiation exposure. Such bureaucratic slow action in emergencies is common in the response to the 2020 coronavirus.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.5
• /
• pp.169-175
• /
• 2012

The Great East Japan Earthquake left some implications. Especially the case of alerting by social media had present. This paper suggests system for posting earthquake information to microblog like twitter and me2day. Microblog is most efficient and effective social media. So, this system receive earthquake information from the Earthquake Broadcast System in the Korea Meteorological Administration and post the information to twitter and me2day. By this system, earthquake information can be notice easily and response can be checked.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.6
• /
• pp.1175-1186
• /
• 2020

In this study, the problem is analyzed, and methods of improvement are presented. For evaluating the performance of the proposed EGT sensor, a complex environment test equipment has been developed to test both high temperature and vibration conditions at the same time. This equipment evaluates the accuracy and response time of the EGT sensor. In the results of the comparison test of the complex environment test equipment of heat and vibration, the existing sensor showed a carbonization problem, and the proposed sensor showed no problem. Therefore, it is expected that the improved EGT sensor will be able to be applied to various industrial fields, including gas turbines for power generation.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.5
• /
• pp.131-138
• /
• 2023

In this paper, a free space optical communication device that can be used in a mobile base station of several km or less was fabricated and its characteristics were investigated. To overcome the loss due to atmospheric transmission, an optical fiber amplifier (EDFA) with an output of 23 dBm or more was used. In order to increase the focusing speed and miniaturization of the laser beam, an optical lens was manufactured, and a transmission lens was designed to have beam divergence within the range of 1.5 to 1.8 [mrad]. A PT module that controls PAN/TILT was fabricated in order to reduce pointing errors and effective automatic alignment between transceiver devices. In this study, Reed-Solomon (RS) code was used to maintain the transmission quality above a certain level. It was manufactured to be able to communicate at a wireless distance of 300m in a weather situation with visibility of 300m. For performance measurement, it was measured using BERT and eye pattern analyzer, and it was confirmed that BER can be maintained at 2.5Gbps.

• Korean Journal of Remote Sensing
• /
• v.34 no.2_2
• /
• pp.407-418
• /
• 2018

The frequency and risk of disasters are increasing due to environmental and social factors. In order to respond effectively to disasters that occur unexpectedly, it is very important to quickly obtain up-to-date information about target area. It is possible to intuitively judge the situation about the area through the image-map generated at high speed, so that it can cope with disaster quickly and effectively. In this study, we propose an image-map generation and visualization system from UAV images for real-time disaster monitoring. The proposed system consists of aerial segment and ground segment. In the aerial segment, the UAV system acquires the sensory data from digital camera and GPS/IMU sensor. Communication module transmits it to the ground server in real time. In the ground segment, the transmitted sensor data are processed to generate image-maps and the image-maps are visualized on the geo-portal. We conducted experiment to check the accuracy of the image-map using the system. Check points were obtained through ground survey in the data acquisition area. When calculating the difference between adjacent image maps, the relative accuracy was 1.58 m. We confirmed the absolute accuracy of the image map for the position measured from the individual image map. It is confirmed that the map is matched to the existing map with an absolute accuracy of 0.75 m. We confirmed the processing time of each step until the visualization of the image-map. When the image-map was generated with GSD 10 cm, it took 1.67 seconds to visualize. It is expected that the proposed system can be applied to real - time monitoring for disaster response.

• International Journal of Contents
• /
• v.10 no.1
• /
• pp.54-61
• /
• 2014

In this paper, we propose a pioneering concept of DPD(Disaster Prevention Design) to realize a securable society in the future. Features of danger in the future society are expected to be diverse, abrupt occurring, large scale, and complicated ways. Due to increment of dangers with their features of uncertainty, interactivity, complexity, and accumulation, human-oriented design concept naturally participates in activities to prevent our society against disasters effectively. We presented DPD is an essential design activity in order to cope with dangers expected in the future societies as well as realize securable environments. DPD is also an integrated design aids including preemptive protections, rapid preparing, recovery, and interactive cooperation. We also expect these activities of DPD is effective for generation of new values in the market, satisfaction of social needs, expansion of design industry, and a novel chance for development in the future society. Throughout this paper, we submit various aspects of DPD concepts including definition, classification, scope, necessity, strategy, influencing elements, process, and its principle. We expect these concepts will be the seed and/or basement of DPD research for the future works. For the direction of study for DPD in the future, we emphasize alarm system for preemptive protection rather than recovery strategy for the damage occurred. We also need to research about progressive prevention techniques and convergence with other areas of design. In order to transfer the concept of product design from facility-oriented mechanism to human-oriented one, we should develop new kinds of city basis facilities, public-sense design concepts referred to social weak-party, e-Learning content design preparing disasters, and virtual simulation design etc. On the other hand, we have to establish laws and regulations to force central and/or provincial governments to have these DPD strategies applying their regional properties. Modern design activities are expanding to UI(user interface) content design area overcoming the conventional design concept of product and/or service. In addition, designers are recognized as art directors or life stylists who will change the human life and create the social value. DPD can be divided into prevention design, preparedness design, response design, and recovery design. Five strategies for successful DPD are Precaution-oriented, Human-oriented, Sense-oriented, Legislation, and Environment Friendly Strategies.

• Journal of Korean Society of Disaster and Security
• /
• v.16 no.4
• /
• pp.147-156
• /
• 2023

Because the behavior of cable bridges is dominated by dynamic response and is relatively complex, short- and long-term field monitoring are often required to evaluate the bridge condition. If a permanent SHMS (Structural Health Monitoring System) is not installed, a portable monitoring system is needed for the checking of bridge condition. In this case, it can be difficult to operate the portable monitoring system due to limited conditions such as power and communication according to the location and type of the bridge. In this study, the portable-based smart structural response monitoring system is developed that can be effectively used for short- and long-term monitoring of cable bridges in Korea and Southeast Asia. The developed system is a multi-channel portable data acquisition and analyzer that can be operated for a long time in the field using its own power supply system, and is included with the automated analysis algorithm for the dynamic characteristics of cable bridges using real-time data. In order to evaluate the field applicability of the developed system, field demonstration was conducted on cable bridges in Korea and Vietnam. Through the demonstration, the reliability and efficiency of field operation of the developed system were confirmed, and additionally, the possibility of application to overseas markets was confirmed in cable bridge monitoring field.

• Journal of the Korean Society of Industry Convergence
• /
• v.22 no.5
• /
• pp.483-490
• /
• 2019

Due to the high complexity and diversity of the problems of the future society, it is getting harder to solve with the traditional single technology. In recent years, there has been a growing interest in convergence technology, which combines or connects different types of technologies to create new technologies and industries. In this study, we explored the convergence R&D area of ICT technology related to landslide prevention/response. It is true that the world has been exposed to various disasters due to recent climate change. As a result, there is a tendency to use Big Data and ICT for disaster preparedness and recovery. Especially, in the case of landslides, it is a natural disaster that requires research not only to study actual landslides but also to predict potential landslides. Therefore, in this study, we analyzed what kind of convergence R&D is being carried out in the field of ICT for preventing and responding to landslide. Therefore, in this study, Web of Science article data were analyzed by using the scientometric analysis and 51 landslide-related ICT convergence R&D areas were derived.