• 한국소음진동공학회논문집
• /
• 제24권2호
• /
• pp.93-101
• /
• 2014

Underwater radiated noise is the key in acoustic stealth performance of modern naval ships. The underwater radiated noise predicted by the hull vibration with radiation efficiency cannot always give the information of radiation pattern which is essential to analyze of detection probability by enemy and to improve the operational performance of the naval ship. The radiation pattern of underwater radiated noise is able to be obtained with radiation efficiency and radiation directional coefficient. In this paper, a new method to extract the radiation efficiency and radiation directional coefficient is suggested and proved with the simulation and experiment by using cylindrical shell of 70 cm diameter in air.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1660-1663
• /
• 2003

This paper present the characteristics of radiation pattern of microstrip slot antenna on the ground plane fed by microstrip line. It is proposed for resonance frequency at 10 GHz. We will analysis two shape of slot antenna; double L-shape slot antenna and U-shape slot antenna. In this case, we will compare far-field radiation pattern of two shape slot antenna. Far-field radiation pattern of double L-shape slot antenna is bi-directional nevertheless U-shape slot antenna is uni-directional. The microstrip slot antenna is propose to analyze far-field radiation pattern for use in the wireless communication systems

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.751-754
• /
• 2004

This paper presents a design of the directional radiation pattern by using the structural-acoustic interaction. For this purpose, prediction of the pressure distribution of the field points and radiation pattern of the structural-acoustic coupling system is shown. In order to get a strong coupling, coupled system that has a finite space and a semi-infinite space separated by two flexible walls and an opening is selected. A volume interaction can be occurred in structure boundary and a pressure interaction can be happened in the opening boundary. The coupled system is maximized the radiation power on the main axis and minimized the side lobe level.

• 한국전자파학회논문지
• /
• 제21권8호
• /
• pp.886-892
• /
• 2010

본 논문에서는 epsilon negative(ENG) 영차 공진과 $TM_{010}$-모드를 결합하여 넓은 대역폭을 갖고, 지향성 방사 패턴을 갖는 하이브리드 안테나를 제안한다. ENG 영차 공진을 얻기 위해 버섯 구조를 이용하였고, $TM_{010}$ 모드를 얻기 위해 패치 안테나를 이용하였다. 이 두 개의 안테나 사이에 갭을 주어 하나의 동축 선로 급전 구조로 두 개의 안테나를 결합하였다. ENG ZOR 주파수는 4 GHz, $TM_{010}$의 주파수는 3.9 GHz로 설계하였다. 두 주파수가 근접해 있기 때문에 이중 공진을 형성할 수 있고, 따라서 대역폭을 확장시킬 수가 있다. ENG ZOR 안테나는 전방향성의 방사 패턴을 갖지만, ENG ZOR 주파수와 $TM_{010}$의 주파수가 매우 근접해 있기 때문에 전방향성의 방사 패턴의 널 부분을 $TM_{010}$ 모드 방사가 보상해줄 수 있어 제안된 안테나는 지향성 방사 패턴을 갖는다. 제안된 안테나는 버섯 구조의 단위 셀을 각각 4개, 3개, 2개로 줄여나가면서 3가지 종류로 설계하여 특성을 분석하였다. 각각의 제안된 안테나는 비대역폭 $4.29{\sim}4.95 %$, 이득 3.16~5.57 dBi, 효율 62.4~94.2 %의 특성을 가지고 있다.

• 스마트미디어저널
• /
• 제4권4호
• /
• pp.64-69
• /
• 2015

본 논문에서는 UWB 통신 시스템의 테이퍼드 슬롯 안테나를 제안하였다. 테이퍼드 슬롯 안테나는 넓은 대역폭 특성과 진행파 안테나의 지향성 방사를 갖는다. 제안된 테이퍼드 슬롯 안테나는 Ansys사의 HFSS를 사용하여 설계하였으며, 반사손실 및 정재파비, 방사패턴 등을 분석하였다. 안테나의 동작 대역은 2.7 ~ 4.8 GHz 대역에서 -10 dB S11 및 $VSWR{\leq}2$(2.1 GHz)를 만족하였다. 안테나의 방사패턴은 E-평면(YZ plane)과 H-평면(XZ plane)에서 특정한 방향으로 신호를 전송하는 지향성 방사패턴을 보였으며, 이득은 4.5 GHz 대역에서 7.3 dBi의 높은 이득을 보였다. 따라서 제안된 테이퍼드 슬롯 안테나는 넓은 대역폭 특성과 위치인식에 적합한 지향성의 특성을 보인다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제53권8호
• /
• pp.443-446
• /
• 2004

In this paper, a multi-band ceramic chip antenna for WLAN(Wireless LAN) applications is designed. The design target is to obtain 0 dBi of coverage gain with omni directional radiation pattern. The antenna is fabricated using Low Temperature Co-fired Ceramic(LTCC) technology. The size of the chip antenna is $2.2{\times}9.65{\times}1.02$mm. The measured antenna gain is 1 dBi at 2.44 GHz and 0.5 dBi at 5.5 GHz. The omni directional radiation pattern for the two operating bands is obtained. The measured bandwidth(S11=-10 dB) are 90 MHz at 2.44 GHz and 1280 MHz at 5.5 GHz respectively

• Journal of electromagnetic engineering and science
• /
• 제8권1호
• /
• pp.1-5
• /
• 2008

In this paper, a biconical type antenna is proposed for EMI test site validation above 1 GHz. To achieve broadband and omni-directional radiation patterns required by international standard(CISPR), the proposed antenna consists of general bicones with cylindrical loads and adopts side feeding method to minimize the influence on H-plane pattern due to feeding cable, balun, and connector. The radiation patterns of the fabricated antenna are measured and the results are compared with CISPR criteria and commercial antenna in our interest frequencies. Although the proposed antenna has a few problems in frequency range of 1 GHz to 2 GHz, it has relatively better performance than commercial antenna.

• Nuclear Engineering and Technology
• /
• 제54권6호
• /
• pp.1982-1990
• /
• 2022

The purpose of this study was to verify the possibility of fuel rod pattern analysis in a fresh fuel assembly using the Yonsei single-photon emission computed tomography (YSECT) system. The YSECT system consisted of three main parts: four trapezoidal-shaped bismuth germanate scintillator-based 64-channel detectors, a semiconductor-based multi-channel data acquisition system, and a rotary stage. In order to assess the performance of the prototype YSECT, tomographic images were obtained for three representative fuel rod patterns in the 6 × 6 array using two representative image-reconstruction algorithms. The fuel-rod patterns were then assessed using an in-house fuel rod pattern analysis algorithm. In the experimental results, the single-directional projection images for those three fuel-rod patterns well discriminated each fuel-rod location, showing a Gaussian-peak-shaped projection for a single 10 mm-diameter fuel rod with 12.1 mm full-width at half maximum. Finally, we successfully verified the possibility of the fuel rod pattern analysis for all three patterns of fresh fuel rods with the tomographic images obtained by the rotational YSECT system.

• 한국정보통신학회논문지
• /
• 제23권10호
• /
• pp.1261-1268
• /
• 2019

본 논문에서는 반사판을 갖는 새로운 모노폴 안테나를 제안 하였다. 제안한 안테나는 TRF-45 기판으로 제작하였으며, 제작한 안테나와 결합한 반사판도 FR-4 기판으로 제작하였다. 안테나 후면에 위치한 반사판으로 인해 후면에 반사되는 전류가 억제되는 것을 확인하였다. 제안한 모노폴 안테나의 대역폭은 2.65 GHz이며, 반사판이 없는 모노폴 안테나의 대역폭은 2.88 GHz이다. 또한, 반사판이 없는 안테나는 E-평면에서 양방향 방사 패턴이 관찰되었으며, H-평면에서는 무지향성의 방사패턴이 관찰되었다. 그러나 반사판을 갖는 안테나의 경우 후방 방사를 억제하며, E-평면과 H-평면에서 지향성 방사를 제공한다.

• Journal of electromagnetic engineering and science
• /
• 제19권1호
• /
• pp.20-30
• /
• 2019

A wide-band multiple-input multiple-output (MIMO) antenna with dual-band (2.4 and 5 GHz) operation is proposed for premium indoor access points (IAPs). Typically, an omni-directional pattern is used for dipole antennas and a directional radiation pattern is used for patch antennas. In this paper, both antenna types were used to compare their performance with that of the proposed $2{\times}2$ MIMO antenna. We simulated and measured the performance of the MIMO antenna, including the isolation, envelope correlation coefficient (ECC), mean effective gain (MEG) for the IAPs, and the throughput, in order to determine its communication quality. The performance of the antennas was analyzed according to the ECC and MEG. The proposed antenna has sufficient performance and excellent characteristics, making it suitable for IAPs. We analyzed the communication performance of wireless networks using the throughput data of a typical office environment. The network throughput of an 802.11n device was used for the comparison and was conducted according to the antenna type. The results showed that the values of the ECC, MEG, and the throughput have unique characteristics in terms of their directivity, antenna gains, isolation, etc. This paper also discusses the communication performance of various aspects of MIMO in multipath situations.