• 한국정보통신학회논문지
• /
• 제15권2호
• /
• pp.265-272
• /
• 2011

본 논문에서는 협소한 공간에서 예비용 도플러 전방향표지시설(DVOR)의 모니터링 시스템이 실제 운영 상태와 유사하게 동작할 수 있게 하기 위한 DVOR 가상 신호 발생기를 설계 및 제작하여 "DVOR 가상 모니터링 시스템"에 관하여 연구하였다. 설계, 제작된 DVOR 가상 신호 발생기는 현재 운용중인 장비에서 발생되는 신호의 사양에 적합하도록 하였고, 파라미터의 가변으로 장비의 운영 조건을 맞추는 것이 가능하도록 하였으며, 회로구성은 크게 동기 입력부, 변조부, 고이득 증폭부 및 전원부로 하였다. 본 연구에서 설계·구현된 가상 신호 발생기를 이용한 "DVOR 가상 모니터링 시스템"은 측대파 발생 안테나와 같이 실제 시스템을 사용하지 않고도 좁은 공간에서 실제 상황과 같은 운용 상태를 구성 할 수 있어 저비용의 실전 교육용으로 사용하기에 매우 적합하다고 사료된다.

• 문화기술의 융합
• /
• 제4권3호
• /
• pp.241-246
• /
• 2018

영상 기기의 기계적인 문제로 인해 실험 데이터에 발생한 잡음으로 인한 인식 오류를 최소화하기 위해서 영상복원 과정을 거친다. 영상 복원 방법은 실험 데이터를 구성하는 각각의 픽셀에 대해 Direct Neighbor와 Indirect Neighbor의 개수와 위치를 조사해서 잡음을 해결한다. 결과적으로, 영상 복원 과정을 통해 실험 데이터에 발생한 잡음을 최대한 제거하고, 영역 단위로 학습 데이터와 실험 데이터의 차이를 계산해서 잡음에 의한 인식 오류 가능성을 낮춤으로써 만족할만한 인식 결과를 얻을 수 있다.

• Journal of electromagnetic engineering and science
• /
• 제13권1호
• /
• pp.54-61
• /
• 2013

An equivalent model has been developed to estimate the electromagnetic immunity for integrated circuits under a complex electromagnetic environment. The complete model is based on the characteristics of the equipment and physical configuration of the device under test (DUT) and describes the measurement setup as well as the target integrated circuits under test, the corresponding package, and a specially designed printed circuit board. The advantage of the proposed model is that it can be applied to a SPICE-like simulator and the immunity of the integrated circuits can be easily achieved without costly and time-consuming measurements. After simulation, measurements were performed to verify the accuracy of the equivalent model for immunity prediction. The improvement of measurement accuracy due to the added effect of a bi-directional coupler in the test setup is also addressed.

• Smart Structures and Systems
• /
• 제19권6호
• /
• pp.679-694
• /
• 2017

The complexity, enlargement and irregularity of structures and multi-directional dynamic loads acting on the structures can lead to unexpected structural behavior, such as torsion. Continuous torsion of the structure causes unexpected changes in the structure's stress distribution, reduces the performance of the structural members, and shortens the structure's lifespan. Therefore, a method of monitoring the torsional behavior is required to ensure structural safety. Structural torsion typically occurs accompanied by displacement, but no model has yet been developed to measure this type of structural response. This research proposes a model for measuring dynamic torsional response of structure accompanied by displacement and for identifying the torsional modal parameter using vision-based displacement measurement equipment, a motion capture system (MCS). In the present model, dynamic torsional responses including pure rotation and translation displacements are measured and used to calculate the torsional angle and displacements. To apply the proposed model, vibration tests for a shear-type structure were performed. The torsional responses were obtained from measured dynamic displacements. The torsional angle and displacements obtained by the proposed model using MCS were compared with the torsional response measured using laser displacement sensors (LDSs), which have been widely used for displacement measurement. In addition, torsional modal parameters were obtained using the dynamic torsional angle and displacements obtained from the tests.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2018년도 춘계학술대회
• /
• pp.484-486
• /
• 2018

최근 다양한 분야에서 디지털 장비의 사용이 증가함에 따라 영상 및 신호처리의 중요성이 높아지고 있다. 하지만 디지털 신호는 송수신 과정에서 많은 종류의 잡음이 발생하며 고장의 원인이 되고 있다. 이러한 이유로 여러 분야에서 잡음 제거를 전처리 과정으로서 필수적으로 행한다. 본 논문은 임펄스 잡음과 AWGN이 혼합된 잡음을 제거하기 위해 잡음 판단을 통해 잡음을 구분하여 잡음 제거를 진행한다. 그리고 잡음 종류에 따라 변형된 가우시안 필터와 방향성 유효 화소를 이용하여 처리하는 알고리즘을 제안하였다. 시뮬레이션 결과 우수한 잡음제거 특성을 나타내었으며, 객관적인 판단을 위해 기존 방법들과 비교하였다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.349-352
• /
• 2007

The Fourth Assessment Report of IPCC predicted that global warming is already happening and it should be caused from the increase of greenhouse gases by the extension of human activities. These global changes will give a serious influence for human society. Global environment can be monitored by the earth observation using satellite. For the observation of global climate change and resolving the global warming process, satellite should be useful equipment and its detecting data contribute to social benefits effectively. JAXA (former NASDA) has made a new plan of the Global Change Observation Mission (GCOM) for monitoring of global environmental change. SGLI (Second Generation GLI) onboard GCOM-C (Climate) satellite, which is one of this mission, provides an optical sensor from Near-DV to TIR. Characteristic specifications of SGLI are as follows; 1) 250 m resolutions over land and area along the shore, 2) Three directional polarization observation (red and NIR), and 3) 500 m resolutions temperature over land and area along shore. These characteristics are useful in many fields of social benefits. For example, multi-angular observation and 250 m high frequency observation give new knowledge in monitoring of land vegetation. It is expected that land products with land aerosol information by polarization observation are improved remarkably. We are studying these possibilities by ground data and satellite data.

• 한국정밀공학회지
• /
• 제31권5호
• /
• pp.423-430
• /
• 2014

In this study, the five-DOF motion at ultra-precision linear stage under static and dynamic conditions are evaluated through the extending application of ISO 230-2. As the performance factors, the bi-directional accuracy and repeatability of the five-DOF motion are quantitatively evaluated with the measurement uncertainties which are determined using the standard uncertainty of equipment used in experiment. The motion under static condition are analyzed using geometric errors. The five geometric errors except the linear displacement error are measured using optimal measurement system which is designed to enhance the standard uncertainty of geometric errors. In addition, the motion under dynamic conditions are analyzed with respect to the conditions with different feed rate of the stage. The experimental results shows that the feed rate of stage has a significant effect on straightness motions.

• 조명전기설비학회논문지
• /
• 제24권10호
• /
• pp.58-66
• /
• 2010

This paper shows an implementation and management result of wireless networks based security light control system, which performs a great role in protection of pedestrians and prevention of crime. Conventional security light units have severe limits in confirmation and inspection of security light unit failure, like wilful damage by someone or failure by influence of other equipment or failure by spontaneous heat-increase, and so on. In addition, local government offices are responsible for maintenance of security light units and as a matter of fact, most of civil complaints are about security light units. It is an obvious that the existing security light maintenance system reaches the limit and the security light maintenance problem is a difficulty of local government. Therefore, efficient security light control system is needed, which enables central control and intelligent maintenance. Moreover, the system has to be easy to control and has to be stable. In this study, wireless sensor network based security light control system is implemented, which is independent of programming language and platform, and which is simple to control and extend the system. The proven protocols, HTTP and SOAP, are utilized in order to improve the system reliability. This paper shows the excellence of our proposed system by implementing and operating it in real environment.

• 한국전기전자재료학회논문지
• /
• 제31권1호
• /
• pp.61-67
• /
• 2018

High-power lithium batteries are suitable for equipment with high power output needs, such as for ESS's initial start-up. However, their management cost is increased by the installation of air-conditioning to minimize the risk of explosion due to internal temperature rise and also by a restriction on the number of charge/discharge cycles. High-capacity flow batteries, on the other hand, have many advantages. They can be used for over 20 years due to their low management costs, resulting from no risk of explosion and a high number of charge/discharge cycles. In this paper, we propose an ESS based on hybrid batteries that uses a lithium iron phosphate battery (LiFePO) at the initial startup and a vanadium redox flow battery (VRFB) from the end of the transient period, with a bi-directional PCS to operate two batteries with different DC voltage levels and using an efficient energy management control algorithm.

• 드라이브 ㆍ 컨트롤
• /
• 제18권1호
• /
• pp.17-23
• /
• 2021

The flow signal or spool position signal is used to determine the dynamic characteristics of directional control valves. Alternatively, the signal of spool position or flow can be replaced with the velocity of a low friction, low inertia actuator. In this study, the frequency response of the servo valve equipped with a spool position transducer is measured with a metering cylinder. The input signal, spool displacement, load pressure, and velocity of the metering cylinder are measured, and the theoretical results from the transfer function analysis are verified. The superposition rule for magnitude ratio and phase angle was found to be always applicable among any signal type, and it was found that the load pressure signal is not appropriate for use as the signal for measuring the frequency response of a servo valve. It was confirmed that the frequency response of a servo valve using metering cylinder was similar to the results from a spool displacement signal. The metering cylinder used for measuring the frequency response of a servo valve should be designed to have sufficiently greater bandwidth frequency than the bandwidth frequency of the servo valve.