• 제목/요약/키워드: Direct-X

검색결과 1,313건 처리시간 0.025초

습식 직접 합성법에 의한 Ni-Zn Ferrite의 합성 및 물성 연구 (Synthesis and Properties of Ni-Zn Ferrite by Wet-Direct Process)

  • 이경희;이병하;이융걸;황우연
    • 한국세라믹학회지
    • /
    • 제28권3호
    • /
    • pp.225-233
    • /
    • 1991
  • In this study, we tried to find out the appropriate synthetic condition and magnetic properties of Ni-Zn ferrite {(NixZn1-x)Fe2O4} powders (where X=0, 0.1, 0.2, 0.3, ……0.9, 1). Ferrite powders were prepared by wet-direct method at 86℃ for 6hrs from FeCl36H2O, NiCl26H2O, and ZnCl2. The powders of (NixZn1-x)Fe2O4 (where X=0.4, 0.5, 0.6) have a good crystallinity, but the other ferrite powders consist of crystal and precursor ferrite. The ferrite powder's lattice constant is increased when ratio of ZnO contant is increased in the ferrite composition. And initial permeability was measured after sintering, result indicated regular pattern except (Ni0.4Zn0.6)Fe2O4 when the frequency were changed 10KHz to 10MHz.

  • PDF

Almost Projective Modules over Artin Algebras

  • Park, Jun Seok
    • 충청수학회지
    • /
    • 제1권1호
    • /
    • pp.43-53
    • /
    • 1988
  • The main result of this paper is a characterization of almost projective modules over art in algebras by means of irreducible maps and almost split sequences. A module X is an almost projective module if and only if it has a presentation $0{\longrightarrow}L{\longrightarrow^{\alpha}}P{\longrightarrow}X{\longrightarrow}0$ with projective module P and irreducible maps ${\alpha}$. Let X be an injective almost projective non simple module and $0{\rightarrow}Dtr(x){\rightarrow}E{\rightarrow}X{\rightarrow}0$ be an almost split sequence. If $E=E_1{\oplus}E_2$ is a direct decomposition of indecomposable modules then ${\ell}(X)=3$.

  • PDF

외부표정요소 직접결정에 의한 수치정사영상 생성 (Generation of Digital Orthoimage using Direct Georeferencing)

  • 송연경
    • Spatial Information Research
    • /
    • 제13권1호
    • /
    • pp.55-63
    • /
    • 2005
  • 최근에는 항측기에 GPS/INS 장비를 탑재하여 사진의 촬영과 동시에 외부표정요소를 직접 결정할 수 있는 Direct Georeferencing기술의 개발로 인하여 지상기준점을 최소로 측량하거나 생략이 가능하게 되었다. Direct Georeferencing 기법을 이용하게 되면 외부표정요소를 구하기 위한 전처리 과정을 생략할 수 있다. 따라서 지상기준점을 이용한 사진기준점측량(AT)을 수행하지 않더라도 수치표고모델만 미리 확보되어 있으면 촬영과 동시에 수치정사사진을 생성할 수 있다. 본 연구에서는 촬영과 동시에 GPS/INS에 의해 획득한 외부표정요소와 항공사진을 이용하여 영상매칭에 의하여 수치표고모델(DEM)을 자동 생성하고, 이 결과를 바탕으로 정사사진을 제작하였다. 실제 도화데이터와 Direct Georeferencing 정사영상과의 오차를 평가한 결과, 표준편차가 X는 약 62cm, Y는 약 76cm 정도가 발생하였다. 이 결과는 축적 1:5,000 수치지도의 정확도 요구를 충분히 만족시킬 수 있는 양호한 결과임을 알 수 있다. Direct Georeferencing에 의한 정사영상의 제작방법은 큰 크기의 과대오차가 발생하는 부분을 수작업 또는 반자동으로 해결할 수 있으면 효율적으로 수치지도를 수정/갱신 할 수 있을 것으로 판단된다.

  • PDF

Effects of hydrogen and ammonia partial pressure on MOCVD $Co/TaN_x$ layer for Cu direct electroplating

  • 박재형;문대용;한동석;윤돈규;박종완
    • 한국재료학회:학술대회논문집
    • /
    • 한국재료학회 2012년도 춘계학술발표대회
    • /
    • pp.84-84
    • /
    • 2012
  • 소자가 고집적화 됨에 따라, 비저항이 낮고 electro migration (EM), Stress Migration (SM) 특성이 우수한 구리(Cu)를 배선재료로서 사용하고 있다. 그러나, 구리는 Si과 $SiO_2$의 내부로 확산이 빠르게 일어나, Si 소자 내부에 deep donor level을 형성하고, 누설 전류를 증가시키는 등 소자의 성능을 저하시킬 수 있는 문제점을 가지고 있다. 그러나, electroplating 을 이용하여 증착한 Cu 박막은 일반적으로 확산 방지막으로 쓰이는 TiN, TaN, 등의 물질과의 접착 (adhesion) 특성이 나쁘다. 따라서, Cu CMP 에서 증착된 Cu 박막의 벗겨지거나(peeling), EM or SM 저항성 저하 등의 배선에서의 reliability 문제를 야기하게된다. 따라서 Cu 와 접착 특성이 좋은 새로운 확산방지막 또는 adhesion layer의 필요성이 대두되고 있다. 본 연구에서는 이러한 Cu 배선에서의 접착성 문제를 해결하고자 Metal organic chemical vapor deposition (MOCVD)을 이용하여 제조한 코발트(Co) 박막을 $Cu/TaN_x$ 사이의 접착력 개선을 위한 adhesion layer로 적용하려는 시도를 하였다. Co는 비저항이 낮고, Cu 와 adhesion이 좋으며, Cu direct electroplating 이 가능하다는 장점을 가지고 있다. 하지만, 수소 분위기에서 $C_{12}H_{10}O_6(Co)_2$ (dicobalt hexacarbonyl tert-butylacetylene, CCTBA) 전구체에 의한 MOCVD Co 박막의 경우 탄소, 산소와 같은 불순물이 다량 함유되어 있어, 비저항, surface roughness 가 높아지게 된다. 따라서 구리 전착 초기에 구리의 핵 생성(nucleation)을 저해하고 핵 생성 후에도 응집(agglomeration)이 발생하여 연속적이고 얇은 구리막 형성을 방해한다. 이를 해결하기 위해, MOCVD Co 박막 증착 시 수소 반응 가스에 암모니아를 추가로 주입하여, 수소/암모니아의 분압을 1:1, 1:6, 1:10으로 변화시켜 $Co/TaN_x$ 박막의 특성을 비교 분석하였다. 각각의 수소/암모니아 분압에 따른 $Co/TaN_x$ 박막을 TEM (Transmission electron microscopy), XRD (X-ray diffraction), AES (Auger electron spectroscopy)를 통해 물성 및 조성을 분석하였고, AFM (Atomic force microscopy)를 이용하여, surface roughness를 측정하였다. 실험 결과, $Co/TaN_x$ 박막은 수소/암모니아 분압 1:6에서 90 ${\mu}{\Omega}-cm$의 낮은 비저항과 0.97 nm 의 낮은 surface roughness 를 가졌다. 뿐만 아니라, MOCVD 에 의해 증착된 Co 박막이4-6 % concentration 의 탄소 및 산소 함량을 가지는 것으로 나타났고, 24nm 크기의 trench 기판 위에 약 6nm의 $Co/TaN_x$ 박막이 매우 균일하게 형성된 것을 확인 할 수 있었다. 이러한 결과들은, 향후 $Co/TaN_x$ 박막이 Cu direct electroplating 공정이 가능한 diffusion barrier로서 성공적으로 사용될 수 있음을 보여준다.

  • PDF

NOTES ON A NON-ASSOCIATIVE ALGEBRA WITH EXPONENTIAL FUNCTIONS II

  • Choi, Seul-Hee
    • 대한수학회보
    • /
    • 제44권2호
    • /
    • pp.241-246
    • /
    • 2007
  • For the evaluation algebra $F[e^{{\pm}x}]_M\;if\;M=\{{\partial}\}$, then $$Der_{non}(F[e^{{\pm}x}]_M)$$ of the evaluation algebra $(F[e^{{\pm}x}]_M)$ is found in the paper [15]. For $M=\{{\partial},\;{\partial}^2\}$, we find $Der_{non}(F[e^{{\pm}x}]_M))$ of the evaluation algebra $F[e^{{\pm}x}]_M$ in this paper. We show that there is a non-associative algebra which is the direct sum of derivation invariant subspaces.

GENERAL SOLUTION AND ULAM STABILITY OF GENERALIZED CQ FUNCTIONAL EQUATION

  • Govindan, Vediyappan;Lee, Jung Rye;Pinelas, Sandra;Muniyappan, P.
    • Korean Journal of Mathematics
    • /
    • 제30권2호
    • /
    • pp.403-412
    • /
    • 2022
  • In this paper, we introduce the following cubic-quartic functional equation of the form $$f(x+4y)+f(x-4y)=16[f(x+y)+f(x-y)]{\pm}30f(-x)+\frac{5}{2}[f(4y)-64f(y)]$$. Further, we investigate the general solution and the Ulam stability for the above functional equation in non-Archimedean spaces by using the direct method.

ADDITIVE-QUADRATIC ρ-FUNCTIONAL INEQUALITIES IN FUZZY BANACH SPACES

  • LEE, SUNG JIN;SEO, JEONG PIL
    • 한국수학교육학회지시리즈B:순수및응용수학
    • /
    • 제23권2호
    • /
    • pp.163-179
    • /
    • 2016
  • Let $M_1f(x,y):=\frac{3}{4}f(x+y)-\frac{1}{4}f(-x-y)+\frac{1}{4}(x-y)+\frac{1}{4}f(y-x)-f(x)-f(y)$, $M_2f(x,y):=2f(\frac{x+y}{2})+f(\frac{x-y}{2})+f(\frac{y-x}{2})-f(x)-f(y)$ Using the direct method, we prove the Hyers-Ulam stability of the additive-quadratic ρ-functional inequalities (0.1) $N(M_1f(x,y)-{\rho}M_2f(x,y),t){\geq}\frac{t}{t+{\varphi}(x,y)}$ and (0.2) $N(M_2f(x,y)-{\rho}M_1f(x,y),t){\geq}\frac{t}{t+{\varphi}(x,y)}$ in fuzzy Banach spaces, where ρ is a fixed real number with ρ ≠ 1.

D3D API Hooking을 이용한 게임 프로세스 탐지 (Game process detection to Using D3D API Hooking)

  • 천대영;이경순;편기현
    • 한국정보과학회:학술대회논문집
    • /
    • 한국정보과학회 2012년도 한국컴퓨터종합학술대회논문집 Vol.39 No.1(D)
    • /
    • pp.135-136
    • /
    • 2012
  • 윈도우기반 게임 프로그램의 엔진은 대부분 DirectX를 사용하고 있다. 이는 게임 프로세스를 탐지하는데에 있어서 수많은 게임의 이름을 알고 있지 않아도, DirectX의 사용여부로 게임 프로세스를 탐지할 수 있음을 의미한다. 본 논문은 유저모드 후킹 Windows Message Hooking과 Direct3D Hooking을 이용하여 게임 프로세스를 탐지하는 방법을 제안하고자 한다.