• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.11
• /
• pp.889-902
• /
• 2020

In this study, a numerical analysis was performed to confirm the formation of supersonic flow and the stabilization time satisfying the design condition in a Direct-connect supersonic combustor. The process was examined in which the high-pressure gas of vitiation air heater propagates downstream to the supersonic combustor and forms a supersonic flow field. It was confirmed through the analysis of pressure and temperature that the supersonic flow field satisfies the design points of Mach number 2.0 and 1,000 K, and requires a minimum of 4.0 ms for stabilization. These results indicate that the time required for the supersonic flow field stabilization should be taken into account when testing for the supersonic combustion experiment.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2003.05a
• /
• pp.59-63
• /
• 2003

This paper describes the conceptual design method of subscale direct-connect test facility for liquid fuel ramjet combustion study and preliminary analysis of test results. The measured pressure signal represents the successful operation of the test facility. The pressure oscillation in combustion chamber shows the dominant frequency of 190Hz, relatively very low frequency to 1L acoustic mode (1200Hz) based on the length of combustor. It is suspected that there were several driving sources, which are vortex street at backward step of combustor, inlet resonance induced by the long length of unchecked inlet, and/or combustor configuration with optical window.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.1
• /
• pp.138-147
• /
• 2011

The objective of this study which it sees direct shear stress and comparative analysis of flexural shear stress leads and it is a shear stress analysis which it follows in load direction of the structure which uses Perfobond Rib shear connectors. To analyze direct shear stress, five Perfobond Rib shear connect experiments were fabricated with five variables and conducted Push-out Tests. After experiments, mechanism of Perfobond Rib shear connector was examined and direct shear formula was proposed based on primary factors which influence direct shear stress. Also, for the analysis of flexural shear steel-concrete composite slab specimens were fabricated and static flexural test. Based on the static flexural test it analyzed the flexural behavior and the flexural shear stress it calculated. Direct shear stress and EN 1994-1-1 to lead and be calculated, it compared the flexural shear stress and it analyzed in about the shear resistance stress which it follows in load direction.

• Journal of Distribution Science
• /
• v.14 no.11
• /
• pp.91-102
• /
• 2016

Purpose - The objectives of this study are as follows. First, it aims to suggest an analysis model that has integrated the relationship between the two factors and export performance and conduct an empirical analysis of the factors. Second, the study seeks to analyze the mediating effect by setting direct channel governance as a specific activity to connect market orientation, a cultural asset, to export performance. Third, through these analyses, the study intends to apply the relationship between market orientation and direct channel governance that the existing studies have failed to observe comprehensively on SMEs in Korea. Based on these analyses, the study expects to expand the discussion of previous researches by analyzing the mediating effect of direct channel governance. Research design, data, and methodology - This study developed a model that has integrated market orientation, direct channel governance, and export performance. It established 7 hypotheses including the mediating effect of direct channel governance. Market orientation was consisted of customer orientation and competitor orientation, and 4 latent variables were measured by 18 questions. LISREL, an analysis tool of structural equation model, was used for hypothesis test and there were 183 sample for analysis. Results - The analysis results showed that customer orientation has a positive influence on direct channel governance, but competitor orientation did not have a statistically significant effect. On the contrary, export performance showed an opposite result. That is, customer orientation did not have any influence but competitor orientation had a significant influence on export performance. It was also confirmed that there was a significant influence in the relationship between channel governance and export performance. According to the analysis of mediating effect, direct channel governance had a full mediating effect between customer orientation and export performance. Conclusions - The study results demonstrated that it is important to build a direct channel governance on the export SMEs in Korea, especially since the direct channel governance complements the influence of customer orientation that does not directly influence export performance among market orientation activities. This implies that Korean export SMEs must strive to build an effective direct channel governance.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.23 no.3
• /
• pp.76-87
• /
• 2019

A direct connected test was conducted for a supersonic combustor with a cavity-type flame holder. Liquid hydro-carbon fuel was injected in different types of injectors: inclined and aeroramp injectors, for the flow condition of Mach 4 at an altitude of 20 km. The static pressure on the combustor wall along the axis and the total pressure at the exit of combustor were measured to analyze the combustion characteristics at various fuel flow rates.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1373-1377
• /
• 2003

Current prostheses for amputees are generally extrinsic wearing socket type that the coupling between body stump and appliance wraps the soft tissue and this structure causes several problems :applying direct weight to soft tissue such as skin and muscle, skin trouble of contacting area and pain. In this study, osseointegration implant is a method to directly connect prosthesis to the residual stump skeletal tissue of arm, finger and leg through surgical operation. Technology presented in this paper essentially solves the problems of pain and abnormal weight transfer system indicated above and recovers the functions of the amputated arm and leg. In this paper, implant shape was designed for the first step for the development of osseointegration implant and then we studied the possibility to apply this osseointegration implant to human body by performing implant insertion operation to beagle tibia for the clinical animal test and normal beagle's gait analysis was executed in order to quantitatively verify the beagle's skeletal functions after the implant insertion.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.20 no.4
• /
• pp.87-93
• /
• 2016

In a Direct Connect(DC) mode altitude engine test, a labyrinth seal is set up between an air intake duct and an engine. The labyrinth seal plays a key role in mechanically isolating them, which contributes to the accurate measurement of thrust and the other component forces. However, when high vertical temperature gradient is generated in the supplied air in the duct, the isolation breaks down. In this paper, a labyrinth seal control device is designed and installed in an effort to eliminate the issue. Test result shows the device successfully gets rid of the contact problem even when high vertical temperature gradient is produced.

• Research in Community and Public Health Nursing
• /
• v.11 no.2
• /
• pp.373-388
• /
• 2000

The purpose of this study was to investigate the activities of woman volunteers. The sample consisted of 626 woman volunteers working in 18 districts in Kangwon province. The questionnaires consists of three parts: The first part of the questionnaire addresses demographic information. The second part of the questionnaire asks the feelings of subjects concerning volunteer activities (15 items). The third part of the questionnaire was to explore their perspectives of volunteer activities. An SAS was used for frequency. F-test, and a Pearson Correlation. The results of this study were as follows: 1. Most of the subjects were in their 40's(37.7%) and 10.7% were under age 20. About two thirds(69.8%) were housewives, the Buddhists were the highest religious groups (34.9%). Most of the subjects(36.7%) worked at Red-Cross. 2. Most of the subjects(56.8%) have nuclear families. 3. The subjects worked most frequently was at the Social Welfare Center, followed by homes, and welfare centers. 4. The most frequently used direct service was conversation(38.2%) followed by assistance with the eating process. 5. About thirty-nine percent of the subjects had less than one year of experience, and the majority of subjects had volunteer service once per week. 6. There was a significant relationship among age, number of family, duration of volunteer service, and experience. Integrated service will be needed to connect home health nursing with welfare service.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.6
• /
• pp.666-671
• /
• 2023

As international environmental regulations on ship emissions are gradually strengthened, interest in electric propulsion and hybrid propulsion ships is increasing, and various solutions are being developed and applied to these ships, especially stabilization of the power system and system efficiency. The direct current distribution system is being applied as a way to increase the power. In addition, verification and testing of safety and performance of marine DC distribution systems is required. As a result of establishing a DC distribution test bed, verifying the performance of the DC distribution (variable speed power generation) system, and analyzing fuel consumption, this study applied a variable speed power generation system that is applied to DC power distribution for ships, and converted the power output from the generator into a rectifier. A system was developed to convert direct current power to connect to the system and monitor and control these devices. Through tests using this DC distribution system, the maximum voltage was 751.5V and the minimum voltage was 731.4V, and the voltage fluctuation rate was 2.7%, confirming that the voltage is stably supplied within 3%, and a variable speed power generation system was installed according to load fluctuations. When applied, it was confirmed through testing that fuel consumption could be reduced by more than 20% depending on the section compared to the existing constant speed power generation system.

• Journal of the Korean Chemical Society
• /
• v.43 no.5
• /
• pp.552-563
• /
• 1999

The study investigated and analyzed the middle school student's science textbook learning methods and strategies. The Preferred Mehtod of Study (PMOS) and a clinical interview method were utilized. Results indicate that there is a meaningful and significant positive correlation between the number of times students read a chapter of the science textbook and their science grade point. Students do not tend to alter learning strategies dependent upon the subject matter studied, but easily alter stratgies dependent upon the types of the test. Most students could not construct "organiztional tools" such as a summary, a chart, a talbe, or a figure when they study textbook, but might pursure and prefer only one method when they choose their learning strategise. Very few students (less than 1%) among those queried consciously try to connect between prior knowledge and new concepts in the textbook. Even though students choose the textbook for learning science in the beginning, they prefer to stick to reference and exercise materials. Therefore, detailed and direct studise of the student's learning methods and strategies, as well as research on cognitive psychology and motivational psychology, are necessary in order to develop a new textbook with student-based learning materials. By understanding the student's konwledge level through investigation of his or her learning style, an effective science education program can be realized. Finally, the role of the textbook as a tezching/learning material can be maximized by investigating and understanding the student's learning method and strategy with emphasis on reciprocal action between textbooks.