Garlic (Allium sativum L.) is an important vegetable crop for the Korean people and has long been cultivated extensively in Korea. More recently it has gained importance as a source of certain pharmaceuticals. This additional use has also contributed to the increasing demand for Korean garlic. Garlic has been propagated vegetatively for a long time without control measures against virus diseases. As a result it is presumed that most of the garlic varieties in Korea may have degenerated. The production of virus-free plants offers the most feasible way to control the virus diseases of garlic. However, little is known about garlic viruses both domestically and in foreign countries. More basic information regarding garlic viruses is needed before a sound approach to the control of these diseases can be developed. Currently garlic mosaic disease is most prevalent in plantings throughout Korea and is considered to be the most important disease of garlic in Korea. Because of this importance, studies were initiated to isolate and characterize the garlic mosaic virus. Symptom expression in test plants, physical properties, purification, serological reaction and morphological characteristics of the garlic mosaic virus were determined. Results of these studies are summarized as follows. 1. Surveys made throughout the important garlic growing areas in Korea during 1970-1972 revealed that most of the garlic plants were heavily infected with mosaic disease. 2. A strain of garlic mosaic virus was obtained from infected garlic leaves and transmitted mechanically to Chenopodium amaranticolor by single lesion isolation technique. 3. The symptom expression of this garlic mosaic virus isolate was examined on 26 species of test plants. Among these, Chenopodium amaranticolor, C. quince, C. album and C. koreanse expressed chlorotic local lesions on inoculated leaves 11-12 days after mechanical inoculation with infective sap. The remaining 22 species showed no symptoms and no virus was recovered from them whet back-inoculated to C. amaranticolor. 4. Among the four species of Chtnopodium mentioned above, C. amaranticolor and C. quinoa appear to be the most suitable local lesion test plants for garlic mosaic virus. 5. Cloves and top·sets originating from mosaic infected garlic plants were
I. Introduction Developing the relationships between companies is very important issue to ensure a competitive advantage in today's business environment (Bleeke & Ernst 1991; Mohr & Spekman 1994; Powell 1990). Partnerships between companies are based on having same goals, pursuing mutual understanding, and having a professional level of interdependence. By having such a partnerships and cooperative efforts between companies, they will achieve efficiency and effectiveness of their business (Mohr and Spekman, 1994). However, it is difficult to expect these ideal results only in the B2B corporate transaction. According to agency theory which is the well-accepted theory in various fields of business strategy, organization, and marketing, the two independent companies have fundamentally different corporate purposes. Also there is a higher chance of developing opportunism and conflict due to natures of human(organization), such as self-interest, bounded rationality, risk aversion, and environment factor as imbalance of information (Eisenhardt 1989). That is, especially partnerships between principal(or buyer) and agent(or supplier) of companies within supply chain, the business contract itself will not provide competitive advantage. But managing partnership between companies is the key to success. Therefore, managing partnership between manufacturer and supplier, and finding causes of conflict are essential to improve B2B performance. In conclusion, based on prior researches and Agency theory, this study will clarify how business hazards cause conflicts on supply chain and then identify how developed conflicts have been managed by two control mechanisms. II. Research model III. Method In order to validate our research model, this study gathered questionnaires from small and medium sized enterprises(SMEs). In Korea, SMEs mean the firms whose employee is under 300 and capital is under 8 billion won(about 7.2 million dollar). We asked the manufacturer's perception about the relationship with the biggest supplier, and our key informants are denied to a person responsible for buying(ex)CEO, executives, managers of purchasing department, and so on). In detail, we contact by telephone to our initial sample(about 1,200 firms) and introduce our research motivation and send our questionnaires by e-mail, mail, and direct survey. Finally we received 361 data and eliminate 32 inappropriate questionnaires. We use 329 manufactures' data on analysis. The purpose of this study is to identify the anticipant role of business hazard (environmental dynamism, asset specificity) and investigate the moderating effect of control mechanism(formal control, social control) on conflict-performance relationship. To find out moderating effect of control methods, we need to compare the regression weight between low versus. high group(about level of exercised control methods). Therefore we choose the structural equation modeling method that is proper to do multi-group analysis. The data analysis is performed by AMOS 17.0 software, and model fits are good statically (CMIN/DF=1.982, p<.000, CFI=.936, IFI=.937, RMSEA=.056). IV. Result V. Discussion Results show that the higher environmental dynamism and asset specificity(on particular supplier) buyer(manufacturer) has, the more B2B conflict exists. And this conflict affect relationship quality and financial outcomes negatively. In addition, social control and formal control could weaken the negative effect of conflict on relationship quality significantly. However, unlikely to assure conflict resolution effect of control mechanisms on relationship quality, financial outcomes are changed by neither social control nor formal control. We could explain this results with the characteristics of our sample, SMEs(Small and Medium sized Enterprises). Financial outcomes of these SMEs(manufacturer or principal) are affected by their customer(usually major company) more easily than their supplier(or agent). And, in recent few years, most of companies have suffered from financial problems because of global economic recession. It means that it is hard to evaluate the contribution of supplier(agent). Therefore we also support the suggestion of Gladstein(1984), Poppo & Zenger(2002) that relational performance variable can capture the focal outcomes of relationship(exchange) better than financial performance variable. This study has some implications that it tests the sources of conflict and investigates the effect of resolution methods of B2B conflict empirically. And, especially, it finds out the significant moderating effect of formal control which past B2B management studies have ignored in Korea.
Purpose: In order to develop the national guide-lines for the standardization of radiotherapy we are planning to establish a web-based, on-line data-base system for laryngeal cancer. As a first step this study was performed to accumulate the basic clinical information of laryngeal cancer and to determine the items needed for the data-base system. Materials and Methods: We analyzed the clinical data on patients who were treated under the diagnosis of laryngeal cancer from January 1998 through December 1999 In the South-west area of Korea. Eligiblity criteria of the patients are as follows: 18 years or older, currently diagnosed with primary epithelial carcinoma of larynx, and no history of previous treatments for another cancers and the other laryngeal diseases. The items were developed and filled out by radiation oncologlst who are members of forean Southwest Radiation Oncology Group. SPSS vl0.0 software was used for statistical analysis. Results: Data of forty-five patients were collected. Age distribution of patients ranged from 28 to 88 years(median, 61). Laryngeal cancer occurred predominantly In males (10 : 1 sex ratio). Twenty-eight patients (62
Corporate social responsibility has become a very important issue for researchers (Greenfield, 2004; Maignan & Ralston, 2002; McWilliams et al., 2006; Pearce & Doh 2005), and many consider it necessary for businesses to define their role in society and apply social and ethical standards to their businesses (Lichtenstein et al., 2004). As a result, a significant number of retailers have adopted CSR as a strategic tool to promote their businesses. To this end, this study sought to discover U.S. consumers' attitudes and behavior in ethical purchasing and consumption based on their subjective perception and evaluation of a retailer. The objectives of this study include: 1) determine the participants awareness of retailers corporate social responsibility; 2) assess how participants evaluate retailers corporate social responsibility; 3) examine whether participants evaluation process of retailers CSR influence their attitude toward the retailer; and 4) assess if participants attitude toward the retailers CSR influence their purchase behavior. This study does not focus on actual retailers' CSR performance because a consumer's decision making process is based on an individual assessment not an actual fact. This study examines US college students' awareness and evaluations of retailers' corporate social responsibility (CSR). Fifty six college students at a major Southeastern university participated in the study. The age of the participants ranged from 18 to 26 years old. Content analysis was conducted with open coding and focused coding. Over 100 single-spaced pages of written responses were collected and analyzed. Two steps of coding (i.e., open coding and focused coding) were conducted (Esterberg, 2002). Coding results and analytic memos were used to understand participants' awareness of CSR and their ethical purchasing behavior supported through the selection and inclusion of direct quotes that were extracted from the written responses. Names used here are pseudonyms to protect confidentiality of participants. Participants were asked to write about retailers, their aware-ness of CSR issues, and to evaluate a retailer's CSR performance. A majority (n = 28) of respondents indicated their awareness of CSR but have not felt the need to act on this issue. Few (n=8) indicated that they are aware of this issue but not greatly concerned. Findings suggest that when college students evaluate retailers' CSR performance, they use three dimensions of CSR: employee support, community support, and environmental support. Employee treatment and support were found as an important criterion in evaluation of retailers' CSR. Respondents indicated that their good experience with a retailer as an employee made them have a positive perception and attitude toward the retailer. Regarding employee support four themes emerged: employee rewards and incentives based on performance, working environment, employee education and training program, and employee and family discounts. Well organized rewards and incentives were mentioned as an important attribute. The factors related to the working environment included: how well retailers follow the rules related to working hours, lunch time and breaks was also one of the most mentioned attributes. Regarding community support, three themes emerged: contributing a percentage of sales to the local community, financial contribution to charity organizations, and events for community support. Regarding environments, two themes emerged: recycling and selling organic or green products. It was mentioned in the responses that retailers are trying to do what they can to be environmentally friendly. One respondent mentioned that the company is creating stores that have an environmentally friendly design. Information about what the company does to help the environment can easily be found on the company’s website as well. Respondents have also noticed that the stores are starting to offer products that are organic and environmentally friendly. A retailer was also mentioned by a respondent in this category in reference to how the company uses eco-friendly cups and how they are helping to rebuild homes in New Orleans. The respondents noticed that a retailer offers reusable bags for their consumers to purchase. One respondent stated that a retailer uses its products to help the environment, through offering organic cotton. After thorough analysis of responses, we found that a participant's evaluation of a retailers' CSR influenced their attitudes towards retailers. However, there was a significant gap between attitudes and purchasing behavior. Although the participants had positive attitudes toward retailers CSR, the lack of funds and time influenced their purchase behavior. Overall, half (n=28) of the respondents mentioned that CSR performance affects their purchasing decisions making when shopping. Findings from this study provide support for retailers to consider their corporate social responsibility when developing their image with the consumer. This study implied that consumers evaluate retailers based on employee, community and environmental support. The evaluation, attitude and purchase behavior of consumers seem to be intertwined. That is, evaluation is based on the knowledge the consumer has of the retailers CSR. That knowledge may influence their attitude toward the retailer and thus influence their purchase behavior. Participants also indicated that having CSR makes them think highly of the retailer, but it does not influence their purchase behavior. Price and convenience seem to surpass the importance of CSR among the participants. Implications, recommendations for future research, and limitations of the study are also discussed.
The supply chain management (SCM) systems have emerged as strong managerial tools for manufacturing firms in enhancing competitive strength. Despite of large investments in the SCM systems, many companies are not fully realizing the promised benefits from the systems. A review of literature on adoption, implementation and success factor of IOS (inter-organization systems), EDI (electronic data interchange) systems, shows that this issue has been examined from multiple theoretic perspectives. And many researchers have attempted to identify the factors which influence the success of system implementation. However, the existing studies have two drawbacks in revealing the determinants of systems implementation success. First, previous researches raise questions as to the appropriateness of research subjects selected. Most SCM systems are operating in the form of private industrial networks, where the participants of the systems consist of two distinct groups: focus companies and vendors. The focus companies are the primary actors in developing and operating the systems, while vendors are passive participants which are connected to the system in order to supply raw materials and parts to the focus companies. Under the circumstance, there are three ways in selecting the research subjects; focus companies only, vendors only, or two parties grouped together. It is hard to find researches that use the focus companies exclusively as the subjects probably due to the insufficient sample size for statistic analysis. Most researches have been conducted using the data collected from both groups. We argue that the SCM success factors cannot be correctly indentified in this case. The focus companies and the vendors are in different positions in many areas regarding the system implementation: firm size, managerial resources, bargaining power, organizational maturity, and etc. There are no obvious reasons to believe that the success factors of the two groups are identical. Grouping the two groups also raises questions on measuring the system success. The benefits from utilizing the systems may not be commonly distributed to the two groups. One group's benefits might be realized at the expenses of the other group considering the situation where vendors participating in SCM systems are under continuous pressures from the focus companies with respect to prices, quality, and delivery time. Therefore, by combining the system outcomes of both groups we cannot measure the system benefits obtained by each group correctly. Second, the measures of system success adopted in the previous researches have shortcoming in measuring the SCM success. User satisfaction, system utilization, and user attitudes toward the systems are most commonly used success measures in the existing studies. These measures have been developed as proxy variables in the studies of decision support systems (DSS) where the contribution of the systems to the organization performance is very difficult to measure. Unlike the DSS, the SCM systems have more specific goals, such as cost saving, inventory reduction, quality improvement, rapid time, and higher customer service. We maintain that more specific measures can be developed instead of proxy variables in order to measure the system benefits correctly. The purpose of this study is to find the determinants of SCM systems success in the perspective of vendor companies. In developing the research model, we have focused on selecting the success factors appropriate for the vendors through reviewing past researches and on developing more accurate success measures. The variables can be classified into following: technological, organizational, and environmental factors on the basis of TOE (Technology-Organization-Environment) framework. The model consists of three independent variables (competition intensity, top management support, and information system maturity), one mediating variable (collaboration), one moderating variable (government support), and a dependent variable (system success). The systems success measures have been developed to reflect the operational benefits of the SCM systems; improvement in planning and analysis capabilities, faster throughput, cost reduction, task integration, and improved product and customer service. The model has been validated using the survey data collected from 122 vendors participating in the SCM systems in Korea. To test for mediation, one should estimate the hierarchical regression analysis on the collaboration. And moderating effect analysis should estimate the moderated multiple regression, examines the effect of the government support. The result shows that information system maturity and top management support are the most important determinants of SCM system success. Supply chain technologies that standardize data formats and enhance information sharing may be adopted by supply chain leader organization because of the influence of focal company in the private industrial networks in order to streamline transactions and improve inter-organization communication. Specially, the need to develop and sustain an information system maturity will provide the focus and purpose to successfully overcome information system obstacles and resistance to innovation diffusion within the supply chain network organization. The support of top management will help focus efforts toward the realization of inter-organizational benefits and lend credibility to functional managers responsible for its implementation. The active involvement, vision, and direction of high level executives provide the impetus needed to sustain the implementation of SCM. The quality of collaboration relationships also is positively related to outcome variable. Collaboration variable is found to have a mediation effect between on influencing factors and implementation success. Higher levels of inter-organizational collaboration behaviors such as shared planning and flexibility in coordinating activities were found to be strongly linked to the vendors trust in the supply chain network. Government support moderates the effect of the IS maturity, competitive intensity, top management support on collaboration and implementation success of SCM. In general, the vendor companies face substantially greater risks in SCM implementation than the larger companies do because of severe constraints on financial and human resources and limited education on SCM systems. Besides resources, Vendors generally lack computer experience and do not have sufficient internal SCM expertise. For these reasons, government supports may establish requirements for firms doing business with the government or provide incentives to adopt, implementation SCM or practices. Government support provides significant improvements in implementation success of SCM when IS maturity, competitive intensity, top management support and collaboration are low. The environmental characteristic of competition intensity has no direct effect on vendor perspective of SCM system success. But, vendors facing above average competition intensity will have a greater need for changing technology. This suggests that companies trying to implement SCM systems should set up compatible supply chain networks and a high-quality collaboration relationship for implementation and performance.
1. Introduction: Contrast to the offline purchasing environment, online store cannot offer the sense of touch or direct visual information of its product to the consumers. So the builder of the online shopping mall should provide more concrete and detailed product information(Kim 2008), and Alba (1997) also predicted that the quality of the offered information is determined by the post-purchase consumer satisfaction. In practice, many fashion and apparel online shopping malls offer the picture information with the product on the real person model to enhance the usefulness of product information. On the other virtual product experience has been suggested to the ways of overcoming the online consumers' limited perceptual capability (Jiang & Benbasat 2005). However, the adoption and the facilitation of the virtual reality tools requires high investment and technical specialty compared to the text/picture product information offerings (Shaffer 2006). This could make the entry barrier to the online shopping to the small retailers and sometimes it could be demanding high level of consumers' perceptual efforts. So the expensive technological solution could affects negatively to the consumer decision making processes. Nevertheless, most of the previous research on the online product information provision suggests the VR be the more effective tools. 2. Research Model and Hypothesis: Presented in
The scarcity is pervasive aspect of human life and is a fundamental precondition of economic behavior of consumers. Also, the effect of scarcity message is a power social influence principle used by marketers to increase the subjective desirability of products. Because valuable objects are often scare, consumers tend to infer the scarce objects are valuable. Marketers often do base promotional appeals on the principle of scarcity to increase the subjective desirability their products among consumers. Specially, advertisers and retailers often promote their products using restrictions. These restriction act to constraint consumers' ability th take advantage of the promotion and can assume several forms. For example, some promotions are advertised as limited time offers, while others limit the quantity that can be bought at the deal price by employing the statements such as 'limit one per consumer,' 'limit 5 per customer,' 'limited products for special commemoration celebration,' Some retailers use statements extensively. A recent weekly flyer by a prominent retailer limited purchase quantities on 50% of the specials advertised on front page. When consumers saw these phrase, they often infer value from the product that has limited availability or is promoted as being scarce. But, the past researchers explored a direct relationship between the purchase quantity and time limit on deal purchase intention. They also don't explored that all restriction message are not created equal. Namely, we thought that different restrictions signal deal value in different ways or different mechanism. Consumers appear to perceive that time limits are used to attract consumers to the brand, while quantity limits are necessary to reduce stockpiling. This suggests other possible differences across restrictions. For example, quantity limits could imply product quality (i.e., this product at this price is so good that purchases must be limited). In contrast, purchase preconditions force the consumer to spend a certain amount to qualify for the deal, which suggests that inferences about the absolute quality of the promoted item would decline from purchase limits (highest quality) to time limits to purchase preconditions (lowest quality). This might be expected to be particularly true for unfamiliar brands. However, a critical but elusive issue in scarcity message research is the impacts of a inferred motives on the promoted scarcity message. The past researchers not explored possibility of inferred motives on the scarcity message context. Despite various type to the quantity limits message, they didn't separated scarcity message among the quantity limits. Therefore, we apply a stricter definition of scarcity message(i.e. quantity limits) and consider scarcity message type(general scarcity message vs. special scarcity message), scarcity depth(high vs. low). The purpose of this study is to examine the effect of the scarcity message on the consumer's purchase intension. Specifically, we investigate the effect of general versus special scarcity messages on the consumer's purchase intention using the level of the scarcity depth as moderators. In other words, we postulates that the scarcity message type and scarcity depth play an essential moderating role in the relationship between the inferred motives and purchase intention. In other worlds, different from the past studies, we examine the interplay between the perceived motives and scarcity type, and between the perceived motives and scarcity depth. Both of these constructs have been examined in isolation, but a key question is whether they interact to produce an effect in reaction to the scarcity message type or scarcity depth increase. The perceived motive Inference behind the scarcity message will have important impact on consumers' reactions to the degree of scarcity depth increase. In relation ti this general question, we investigate the following specific issues. First, does consumers' inferred motives weaken the positive relationship between the scarcity depth decrease and the consumers' purchase intention, and if so, how much does it attenuate this relationship? Second, we examine the interplay between the scarcity message type and the consumers' purchase intention in the context of the scarcity depth decrease. Third, we study whether scarcity message type and scarcity depth directly affect the consumers' purchase intention. For the answer of these questions, this research is composed of 2(intention inference: existence vs. nonexistence)
This study was conducted to apply LCA (Life cycle assessment) methodology to lettuce (Lactuca sativa L.) production systems in Namyang-ju as a case study. Five lettuce growing farms with three different farming systems (two farms with organic farming system, one farm with a system without agricultural chemicals and two farms with conventional farming system) were selected at Namyangju city of Gyeonggi-province in Korea. The input data for LCA were collected by interviewing with the farmers. The system boundary was set at a cropping season without heating and cooling system for reducing uncertainties in data collection and calculation. Sensitivity analysis was carried out to find out the effect of type and amount of fertilizer and energy use on GHG (Greenhouse Gas) emission. The results of establishing GTG (Gate-to-Gate) inventory revealed that the quantity of fertilizer and energy input had the largest value in producing 1 kg lettuce, the amount of pesticide input the smallest. The amount of electricity input was the largest in all farms except farm 1 which purchased seedlings from outside. The quantity of direct field emission of
Seo Byeong-o (徐丙五, 1862-1936) played a central role in the formation of the Daegu artistic community-which advocated artistic styles combining poetry, calligraphy and painting-during the Japanese colonial period, when the introduction of the Western concept of 'art' led to the adoption of Japanese and Western styles of painting in Korea. Seo first entered the world of calligraphy and painting after meeting Lee Ha-eung (李昰應, 1820-1898) in 1879, but his career as a scholar-artist only began in earnest after Korea was annexed by Japan in 1910. Seo's oeuvre can be broadly divided into three periods. In his initial period of learning, from 1879 to 1897, his artistic activity was largely confined to copying works from Chinese painting albums and painting works in the "Four Gentlemen" genre, influenced by the work of Lee Ha-eung, in his spare time. This may have been because Seo's principal aim at this time was to further his career as a government official. His subsequent period of development, which lasted from 1898 until 1920, saw him play a leading social role in such areas as the patriotic enlightenment movement until 1910, after which he reoriented his life to become a scholar-artist. During this period, Seo explored new styles based on the orchid paintings of Min Yeong-ik (閔泳翊, 1860-1914), whom he met during his second trip to Shanghai, and on the bamboo paintings of Chinese artist Pu Hua (蒲華, 1830-1911). At the same time, he painted in various genres including landscapes, flowers, and gimyeong jeolji (器皿折枝; still life with vessels and flowers). In his final mature period, from 1921 to 1936, Seo divided his time between Daegu and Seoul, becoming a highly active calligrapher and painter in Korea's modern art community. By this time his unique personal style, characterized by broad brush strokes and the use of abundant ink in orchid and bamboo paintings, was fully formed. Records on, and extant works from, Seo's early period are particularly rare, thus confining knowledge of his artistic activities and painting style largely to the realm of speculation. In this respect, eleven recently revealed nanjukseok (蘭竹石圖; orchid, bamboo and rock) paintings, produced by Seo in 1889, provide important clues about the origins and standards of his early-period painting style. This study uses a comparative analysis to confirm that Seo's orchid paintings show the influence of the early gunran (群蘭圖; orchid) and seongnan (石蘭圖; rock and orchid) paintings produced by Lee Ha-eung before his arrest by Qing troops in July 1882. Seo's bamboo paintings appear to show both that he adopted the style of Zheng Xie (鄭燮, 1693-1765) of the Yangzhou School (揚州畵派), a style widely known in Seoul from the late eighteenth century onward, and of Heo Ryeon (許鍊, 1809-1892), a student of Joseon artist Kim Jeong-hui (金正喜,1786-1856), and that he attempted to apply a modified version of Lee Ha-eung's seongnan painting technique. It was not possible to find other works by Seo evincing a direct relationship with the curious rocks depicted in his 1889 paintings, but I contend that they show the influence of both the late-nineteenth-century-Qing rock painter Zhou Tang (周棠, 1806-1876) and the curious rock paintings of the middle-class Joseon artist Jeong Hak-gyo (丁學敎, 1832-1914). In conclusion, this study asserts that, for his 1889 nanjukseok paintings, Seo Byeong-o adopted the styles of contemporary painters such as Heo Ryeon and Jeong Hak-gyo, whom he met during his early period at the Unhyeongung through his connection with its occupant, Lee Ha-eung, and those of artists such as Zheng Xie and Zhou Tang, whose works he was able to directly observe in Korea.
Collaborative filtering, which is often used in personalization recommendations, is recognized as a very useful technique to find similar customers and recommend products to them based on their purchase history. However, the traditional collaborative filtering technique has raised the question of having difficulty calculating the similarity for new customers or products due to the method of calculating similaritiesbased on direct connections and common features among customers. For this reason, a hybrid technique was designed to use content-based filtering techniques together. On the one hand, efforts have been made to solve these problems by applying the structural characteristics of social networks. This applies a method of indirectly calculating similarities through their similar customers placed between them. This means creating a customer's network based on purchasing data and calculating the similarity between the two based on the features of the network that indirectly connects the two customers within this network. Such similarity can be used as a measure to predict whether the target customer accepts recommendations. The centrality metrics of networks can be utilized for the calculation of these similarities. Different centrality metrics have important implications in that they may have different effects on recommended performance. In this study, furthermore, the effect of these centrality metrics on the performance of recommendation may vary depending on recommender algorithms. In addition, recommendation techniques using network analysis can be expected to contribute to increasing recommendation performance even if they apply not only to new customers or products but also to entire customers or products. By considering a customer's purchase of an item as a link generated between the customer and the item on the network, the prediction of user acceptance of recommendation is solved as a prediction of whether a new link will be created between them. As the classification models fit the purpose of solving the binary problem of whether the link is engaged or not, decision tree, k-nearest neighbors (KNN), logistic regression, artificial neural network, and support vector machine (SVM) are selected in the research. The data for performance evaluation used order data collected from an online shopping mall over four years and two months. Among them, the previous three years and eight months constitute social networks composed of and the experiment was conducted by organizing the data collected into the social network. The next four months' records were used to train and evaluate recommender models. Experiments with the centrality metrics applied to each model show that the recommendation acceptance rates of the centrality metrics are different for each algorithm at a meaningful level. In this work, we analyzed only four commonly used centrality metrics: degree centrality, betweenness centrality, closeness centrality, and eigenvector centrality. Eigenvector centrality records the lowest performance in all models except support vector machines. Closeness centrality and betweenness centrality show similar performance across all models. Degree centrality ranking moderate across overall models while betweenness centrality always ranking higher than degree centrality. Finally, closeness centrality is characterized by distinct differences in performance according to the model. It ranks first in logistic regression, artificial neural network, and decision tree withnumerically high performance. However, it only records very low rankings in support vector machine and K-neighborhood with low-performance levels. As the experiment results reveal, in a classification model, network centrality metrics over a subnetwork that connects the two nodes can effectively predict the connectivity between two nodes in a social network. Furthermore, each metric has a different performance depending on the classification model type. This result implies that choosing appropriate metrics for each algorithm can lead to achieving higher recommendation performance. In general, betweenness centrality can guarantee a high level of performance in any model. It would be possible to consider the introduction of proximity centrality to obtain higher performance for certain models.
, research model suggests VR effect could be moderated by the product types by the usage situations. Product types could be defined as the portable product and installed product, and the information offering type as still picture of the product, picture of the product with the real-person model and VR. 3. Methods and Results: 3.1. Experimental design and measured variables We designed the 2(product types) X 3(product information types) experimental setting and measured dependent variables such as information usefulness, attitude toward the shopping mall, overall product quality, purchase intention and the revisiting intention. In the case of information usefulness and attitude toward the shopping mall were measured by multi-item scale. As a result of reliability test, Cronbach's Alpha value of each variable shows more than 0.6. Thus, we ensured that the internal consistency of items. 3.2. Manipulation check The main concern of this study is to verify the moderate effect by the product type of usage situation. indicates that our experimental manipulation of the moderate effect of the product type was successful. 3.3. Results As
indicates, there was a significant main effect on the only one dependent variable(attitude toward the shopping mall) by the information types. As predicted, VR has highest mean value compared to other information types. Thus, H1 was partially supported. However, main effect by the product types was not found. To evaluate H2 and H3, a two-way ANOVA was conducted. As
indicates, there exist the interaction effects on the three dependent variables(information usefulness, overall product quality and purchase intention) by the information types and the product types. As predicted, picture of the product with the real-person model has highest mean among the information types in the case of portable product. On the other hand, VR has highest mean among the information types in the case of installed product. Thus, H2 and H3 was supported. 4. Implications: The present study found the moderate effect by the product type of usage situation. Based on the findings the following managerial implications are asserted. First, it was found that information types are affect only the attitude toward the shopping mall. The meaning of this finding is that VR effects are not enough to understand the product itself. Therefore, we must consider when and how to use this VR tools. Second, it was found that there exist the interaction effects on the information usefulness, overall product quality and purchase intention. This finding suggests that consideration of usage situation helps consumer's understanding of product and promotes their purchase intention. In conclusion, not only product attributes but also product usage situations must be fully considered by the online retailers when they want to meet the needs of consumers.
The Effects of Intention Inferences on Scarcity Effect: Moderating Effect of Scarcity Type, Scarcity Depth
(소비자의 기업의도 추론이 희소성 효과에 미치는 영향: 수량한정 유형과 폭의 조절효과)
Application of LCA on Lettuce Cropping System by Bottom-up Methodology in Protected Cultivation
(시설상추 농가를 대상으로 하는 bottom-up 방식 LCA 방법론의 농업적 적용)
A Study on the 1889 'Nanjukseok' (Orchid, Bamboo and Rock) Paintings of Seo Byeong-o
(석재 서병오(1862-1936)의 1889년작 난죽석도 연구)
A Study on the Effect of Network Centralities on Recommendation Performance
(네트워크 중심성 척도가 추천 성능에 미치는 영향에 대한 연구)
이메일무단수집거부
이용약관
제 1 장 총칙
제 2 장 이용계약의 체결
제 3 장 계약 당사자의 의무
제 4 장 서비스의 이용
제 5 장 계약 해지 및 이용 제한
제 6 장 손해배상 및 기타사항
Detail Search
Image Search
(β)