• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.39 no.3
• /
• pp.30-38
• /
• 2016

Shuttle-Based Storage/Retrieval System (SBS/RS) is relatively new to industry. The system is in the category of Automated Storage/Retrieval System (AS/RS), but it is different in that the SBS/RS uses shuttles as Storage/Retrieval (SR) machine instead using a stacker crane. The shuttles are assigned to each tier on multi-tier system and operated for pick-up or drop-off order. Since the system can handle multiple orders simultaneously, it can provide much higher throughput than that of general AS/RS with single stocker crane. Thus, this new system is well fit to recent tendency of increasing small quantity batch production and orders. One of the drawback of this system is that it needs a lot of investment to set up. The efficient operation of the system would be one of the critical matters to increase economic efficiency of capital investment. In this study, we focused on the dwell point policy for shuttles to find efficient way of operating the system. There are four basic policies for the dwell point and we had simulation-based experiment for two different scenarios based on the speed of the shuttle and inter-arrival time of the loads coming to the system combined with four different policies. As it was mentioned above, this SBS/RS relatively new to the field and there is no such experiment shown on previous research and the study of dwell point policy for this SBS/RS could provide the direct comparison of each policy with different hardware specification; the capability of the system. The policy that achieves most efficient operation among the given environment is proposed and the usability of the system is discussed.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.6 no.2
• /
• pp.70-80
• /
• 2007

Inter-vehicular communication suffers from a variety of the problem on the road, resulting in large delay in propagating emergency warning. An energy depletion as well as a transmission delay may induced by traffic accident. A transmission delay are caused by direct contention from nodes that can hear each other or indirect contention from nodes that can not hear each other, but simultaneously transmit to the same destination. A variety of works have been researched to solve the transmission delay and energy consumption problem in intelligent cars transportation systems. We consider a vehicle-to-vehicle communication protocol for disseminating an emergency information that include end-to-end and energy efficient transmission. In this paper, we propose A vehicle-to-vehicle communication protocol scheme for dissemination emergency information in intelligent cars communication based on IEEE 802.15.3 wireless personal area networks. Results from a simulation study reveal that our scheme can achieves low latency in delivering emergency warnings, and efficiency in consuming energy in stressful road scenarios.

• Journal of Korean Society of Transportation
• /
• v.27 no.3
• /
• pp.131-140
• /
• 2009

A diversity of railway network function enhancement projects such as the double tracking, electrification, and direct operation have been actively executed to improve the railway service. When the new rapid railway is provided, how many people will use it instead of other transports? How will the railway choice behavior be changed? Accordingly, in this paper, the applicability of diverted travel demand forecast method by Stated Preference(SP) and Transfer Price(TP) data was reviewed for Daegu metropolitan railway service. As the result of implementing the Revealed Preference(RP) and RP+SP model, the total travel time and travel cost parameters are of the right sign and are highly significant. In particular, when TP data is used as the complementary investigation of SP, the boundary value of diverted travel demand can be easily identified by railway fare and travel time service level. Therefore, it is considered that this will practically apply even in other regions as well as Daegu metropolitan railway.

• International Journal of Highway Engineering
• /
• v.16 no.3
• /
• pp.85-99
• /
• 2014

PURPOSES : This study has been performed with the objective to determine threshold zone luminance of adaptation luminance by target safety level in a vehicular traffic tunnel with design speed set at 100km/h. METHODS : The study made a miniature capable of portraying changes in luminance distribution within $2{\times}10^{\circ}$ conical field of view of the driver approaching to the tunnel for the test. Test conditions were set based on justifications for CIE 88-1990's threshold zone luminance used as a reference by domestic tunnel light standards (KS C 3703 : 2010). Luminance contrast of object background and object is 23%, object presentation duration is 0.5 seconds, and size of the object background is $7.3{\times}11.5m^2$ RESULTS : Threshold zone luminance was set within adaptation luminance of $100{\sim}3,000cd/m^2$. Adaptation luminance and threshold zone luminance based on 50%, 75% and 90% target safety level all showed a relatively high linear relationship. According to findings in the study, it is not appropriate to specify the relationship between adaptation luminance and threshold zone luminance as luminance ratio. Rather, direct utilization of the linear relationship gained from the study findings appears to be the better solution. CONCLUSIONS : Findings of this study may be used to determine operation of threshold zone luminance based on target safety level. However, a proper verification and validity of test results are required. Furthermore, a study to determine proper threshold zone luminance level considering target safety level reviewed in this study and various decision-making factors such as economic conditions in Korea and energy-related policies should be carried out in addition. Additional tests on adaptation luminance greater than $3,000cd/m^2$ will be performed, through which application scope of the test findings will be broadened.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.5
• /
• pp.48-54
• /
• 2018

With the 4th industry era, smart factories are emerging. In the era of multi-product small scale production, unmanned transportation vehicles are rapidly increasing in utilization of unmanned transportation vehicles that carry and arrange goods in the work space. The conventional unmanned vehicle detected its position by using the guided line method and the position based method for indoor location recognition and movement. This method has disadvantages of initial high cost and maintenance / maintenance. In this paper, to solve the disadvantages, the method of predicting the direct path of the unmanned vehicle through the Kalman filter is verified using the white LED marker of the warehouse and the position data and the image data of the white LED marker recognition image. Through this, the reliability of the linear movement which occupies the most part in the lattice structure is secured. It is also expected that the reliance on additional position sensors will also be reduced.

• Journal of Korean Society of Transportation
• /
• v.28 no.1
• /
• pp.77-86
• /
• 2010

The study developed physical distribution channel choice models reflecting decision making of the firms and studied how choice decision factors influence selection of distribution channel. The distribution channel survey data in Korea was used to do empirical study. As a choice set, distribution channels were classified into two main choice channels: direct and indirect channels. In addition, indirect channels were classified into other three channels according to the type of intermediate point: distribution center, wholesale store, and agency. This study developed choice models by applying both binary and multinomial logit model with various set of factors. The results showed that the developed logit models seemingly reflect distribution channel choice behaviors. The hypothesis tests on how each factor influences choice of distribution channel were performed and discussed as well.

• Journal of Korean Society of Transportation
• /
• v.35 no.1
• /
• pp.37-49
• /
• 2017

This study proposes an analysis methodology for air quality improvement effect of transport and environment policy that are used for mobile pollution sources. The methodology considers the changes of traffic of road transport sources and air pollutant emission, the changes of atmospheric dispersion of air pollutants and the effects on the health of local residents in response to policy implementation. Especially, the changes to traffic flow must be considered in evaluating the effects on atmospheric environment as it has a direct connection to the effects of the policy in this study. We used bottom-up approach (BUA) based on the travel demand model to reflect the changes of travel behavior in detail in response to the policy implementation compared to the top-down approach (TDA) when calculating the changes of emission level of road transport. We showed the applicability of the proposed analysis methodology through a policy scenario analysis, and the analysis method can be effectively applied to the cases in which travelers' behavior changes are expected.

• The Journal of the Korea Contents Association
• /
• v.16 no.12
• /
• pp.373-382
• /
• 2016

Carbon dioxide Capture and Storage/Sequestration (CCS) technology has attracted attention as an ideal method for most carbon dioxide reduction needs. When the collected carbon dioxide is transported to storage via pipelines, the direct transport is made if the storage is close, otherwise it can also be transported via an intermediate storage hub. Determining the number and the location of the intermediate storage hubs is an important problem. A decision-making algorithm using a mathematical model for solving the problem requires considerably more variables and constraints to describe the multi-objective decision, but the computational complexity of the problem increases and it also does not guarantee the optimality. This research proposes an algorithm to determine the location and the number of the intermediate storage hub and develop a simulator for the connection network of the carbon dioxide emission site. The simulator also provides the course of transportation of the carbon dioxide. As a case study, this model is applied to Korea.

• Journal of Information Technology Applications and Management
• /
• v.26 no.2
• /
• pp.41-60
• /
• 2019

O2O(Online-to-Offline) commerce, a kind of multi-channel, is used in various industries such as accommodation, food and beverage, transportation, and real estate. The O2O commerce, a channel of integrating online and offline, overcomes the limitations of traditional online commerce, where a customer made a purchase decision without direct experience. Despite this advantage of O2O, if the online-offline channel is not effectively linked, customer's complaints would occur due to service failure. This study, with regard to O2O service failure circumstances, intends to investigate the effect of customer's perceived justice on their emotional response, recovery satisfaction, followed by intention to repurchase. Perceived justice in this study is composed of distributive justice, interactional justice, and procedural justice. Furthermore, this study explores the moderation effect of O2O industry types in the relationship between perceived justice and emotion. An O2O industry type is classified into accommodation, food and beverage, and transportation. A hypothesized research model was empirically tested using a structural equation model. The current study collected 433 questionnaires and the target respondents are customers who have experienced service failure in O2O commerce. The empirical results showed that O2O commerce more effectively conducts service recovery strategy and causes positive customer response by integrating online and offline channel. One of the ultimate purposes of O2O service providers is to reduce the likelihood of service failures and to recover more quickly and efficiently by linking two channels rather than using a single channel. This study suggested that the O2O channel is effective in influencing customer satisfaction and loyalty by inducing customer's positive emotions in recovering service failure.

• Structural Monitoring and Maintenance
• /
• v.10 no.1
• /
• pp.25-42
• /
• 2023

Despite the significance of ports as critical economic infrastructure, the berth facilities usually deteriorate due to heavy loading, unloading, aging, environmental weather conditions, marine growths, and lack of efficient maintenance management. Marine berths require proactive maintenance management to limit deterioration and defects as no berth facility is maintenance-free. Thus, delay in carrying out maintenance work for the marine berths can be devastating to the operational process involving ship entry, loading, and unloading operations. The aim of this research is to coordinate both operations work, and maintenance works that take place inside the berth of a local industrial port in Saudi Arabia, by developing a novel framework that integrates both works without affecting the efficiency and functionality of the berth. The study focused on defining the operational process of the port and identifying the elements with direct and indirect effects. In addition to determining the priority for the entry of ships inside the berth, it also identified the factors involved in designing a framework that included maintenance work as a component of the monthly berth occupancy schedule. By applying a mathematical model, a framework was established, which includes all the important elements of the process. As a result of the mathematical method formulation process, a database was designed that organizes and coordinates the operations of all berths within the port. This creates time to carry out the required maintenance work monthly as well as ease of coordination with the contractors responsible for the implementation of those works.