• Macromolecular Research
• /
• v.15 no.5
• /
• pp.459-464
• /
• 2007

Polymer electrolyte membranes, featuring ionic channels, were prepared from sulfonated dextran/ poly(vinyl alcohol) (sD/PVA) membranes. A stiff sulfated dextran was chosen as the route for ionic transport, since ionic sites are located along the stiff dextran main chain. The sD/PVA blend membranes were annealed and then chemically crosslinked. The characteristics of the crosslinked sD/PVA membranes were investigated to determine their suitability as proton exchange membranes. The proton conductivity was found to increase with increasing amounts of sD inside the membrane, which reached a maximum and then decreased when the sD content exceeded 30 wt%, while the methanol permeability increased with increasing sD content. The good dispersion of sD inside the membrane, which serves as an ionic channels mimic, played a significant role in proton transportation.

• Journal of agriculture & life science
• /
• v.45 no.3
• /
• pp.97-104
• /
• 2011

Analyses of export of agricultural products, so far, have not been an easy task because of the lack of direct data from exporting companies. Results obtained from indirect data are subject to criticism and have a restriction on general interpretation. This paper uses and analyzes the direct data from a chrysanthemum-exporting-company, leading to some conclusion that farms receive on average 72.3% of unit price but the share decreases by the distance to the company. Exporting farms have higher income ratio, compared to farms that sell flowers to domestic market. The analysis of unit price and cost shows that the profitability of exporting-company might be worsened if government subsidy is not in place.

• Journal of the Korean Society of Visualization
• /
• v.19 no.2
• /
• pp.26-31
• /
• 2021

The spanwise growth of turbulence structures in turbulent pipe flow was investigated using the direct numerical simulation data of Re_𝜏 = 544, 934 and 3008. Two-point correlations and pre-multiplied energy spectra of streamwise velocity fluctuations were examined along the spanwise direction. The arclength direction is defined as r𝛳, which is useful for an analogy with the spanwise direction for channels or boundary layers; here, r and 𝛳 are the radial distance from the core and the azimuthal angles, respectively. Both analyses showed that the arclength scales increased with increasing the wall-normal distance. It showed that the coherent structures were confined in the core region due to the crowding effect of a circular pipe geometry. The pipe flow simulation could describe a realistic geometrical flow along the azimuthal direction, unlike the simulations of turbulent channel or boundary layer flow using periodic boundary conditions along the spanwise direction. The present results provided the spanwise organization of energy-containing motions over a broad range of scales in turbulent pipe flow.

• International Journal of Internet, Broadcasting and Communication
• /
• v.15 no.3
• /
• pp.122-128
• /
• 2023

This paper proposes two kinds of single-balanced direct conversion quadrature receivers using selfoscillating LMVs in which the voltage-controlled oscillator (VCO) itself operates as a mixer while generating an oscillation. The two LMVs are complementary coupled and series coupled to generate the quadrature oscillating signals, respectively. Using a 65 nm CMOS technology, the proposed quadrature receivers are designed and simulated. Oscillating at around 2.4 GHz frequency, the complementary coupled quadrature receiver achieves the phase noise of -28 dBc/Hz at 1KHz offset and -109 dBc/Hz at 1 MHz offset frequency. The other series coupled receiver achieves the phase noise of -31 dBc/Hz at 1KHz offset and -109 dBc/Hz at 1 MHz offset frequency. The simulated voltage conversion gain of the two single-balanced receivers is 37 dB and 45 dB, respectively. The double-sideband noise figure of the two receivers is 5.3 dB at 1 MHz offset. The quadrature receivers consume about 440 μW dc power from a 1.0-V supply.

• Geomechanics and Engineering
• /
• v.35 no.2
• /
• pp.209-219
• /
• 2023

This paper presents numerical investigations into the particle crushing effect on the shear properties of gravel under direct shear condition. A novel particle crushing model was developed based on the octahedral shear stress criterion and fragment replacement method. A series of direct shear tests were carried out on unbreakable particles and breakable particles with different strengths. The evolutions of the particle crushing, shear strength, volumetric strain behavior, and contact force fabric during shearing were analyzed. It was observed that the number of crushed particles increased with the increase of the shear displacement and axial pressure and decreased with the particle strength increasing. Moreover, the shear strength and volume dilatancy were obviously decreased with particle crushing. The shear displacement of particles starting to crush was close to that corresponding to the peak shear stress got. Besides, the shear-hardening behavior was obviously affected by the number of crushed particles. A microanalysis showed that due to particle crushing, the contact forces and anisotropy decreased. The mechanism of the particle crushing effect on the shear strength was further clarified in terms of the particle friction and interlock.

• Journal of Korean Society of Transportation
• /
• v.24 no.7 s.93
• /
• pp.65-79
• /
• 2006

The ATIS(Advance Traveler Information System), as one part of ITS, is a system aiming to disperse traffic volume on transportation networks by providing traffic information to transportation users on pre-trip and en-route trips. One of tools in ATIS is usage of VMS(Variable Message Signs). It provides to the drivers with direct information about state of processing direction. which is considered as the most effective method in ATIS. The purposes of providing VMS information are classified two categories. One is to provide simple information to drivers for their convenience. The other is to manage traffic demand to improve transportation network performance. However, for more effective and reliable VMS information, several strategies should be taken into account. The main VMS management strategy is "Traffic Diversion Strategy for minimum delay" when traffic congestion or incident are occurred. For effective operation. firstly. reasonable diversion traffic volume is determined by network traffic condition Secondly, it is necessary to make providing information strategy which reflects driver response behavior for controling diversion traffic volume. This paper focuses on the providing real-time route guidance information by VMS when congestion is occurred by the incidents. This sturdy estimates time-dependent system optimal diversion rate that inflects travel time and queue lengths using traffic flow simulation model on base Cellular Automata. In addition, route choice behavior models are developed using binary logit model for traffic information variable by traffic system controller. Finally, this study provides time-dependent VMS massage contents and degree of providing information in order to optimize the traffic flow.

• Journal of Korean Society of Transportation
• /
• v.19 no.1
• /
• pp.17-28
• /
• 2001

The purpose of this study is to analyze logistics cost of transportation systems on EC(electronic commerce) between company and consumer. Transportation system in logistics is classified by three types on EC. The first type is the direct delivery from supply factory to consumers(type I). The second type is the delivery through distribution center in each area by owner logistics company (type II). The third type is the commission of delivery to the third party logistics company(type III). The logistics of EC has various service characteristics such as dealing with small quantity, various goods, and high frequency. This study assumes that all day's order is delivered on a next day. The logistics cost function is calculated according to the number of orders, delivery distance, transport quantify. and allocated freight trucks for daily order of the subject zone. The logistics cost changes according to the daily order characteristics. Therefore it is simulated to analyze the logistics cost change that considers the type of transportation's order characteristics. As a result of analysis, if the number of order is less than 10 and the quantify of each order is less than 10kg, type III has an advantage over the others And if the number of order is more than 10 and the quantity of each order is more than 10kg, type I has an advantage in the same zone and type II has an advantage in the other zones. This study is limited on the actual application because this study doesn't consider logistics infra of supply company and transport service time. If further study that considers these factors is implemented, it can estimate more accurate logistics cost on EC and propose an efficient freight transport alternatives to the company. This study attributes to estimate the logistics cost change over the frequency of daily order, the quantify of supply goods, and the transport distance on EC.

• International Commerce and Information Review
• /
• v.14 no.3
• /
• pp.159-183
• /
• 2012

Promoted in places like Korea, the central government and the local governments that can provide information on which to base investment policy to attract foreign direct mutation-specific gravity model (Shift-Share Model) In this study, the decrease of foreign direct investment performance using factors looked up in the industry. The sample period of 2009, 2010, 2011 nationwide (metropolitan and non-metropolitan separated) of foreign direct investment performance for Industry Standard Industrial Classification (Division) was conducted. Factors to look at the results of the National Growth Effect(NS), the industrial structure effect (IM), local allocation effect(RS) to decrease foreign direct investment in 2010 and 2011 non-metropolitan, metropolitan national growth effect(RS) is negative(-) has a value. Because it appears to be the aftermath of the global recession, the impact on the domestic economy Metropolitan area and the Industrial Mix Effect(IM) to the development of education, culture, business, and transportation, etc. in the development of service industries than in non-metropolitan valid environment. In the sector of services (food accommodation, business services, entertainment), We did it, was able to find the function. However, the Regional Share Effect(RS) be competitive in the manufacturing sector in metropolitan areas in the metal and chemical sectors have been identified. These results seems to enhance the competitiveness of the region, such as the metropolitan area's excellent workforce. Shift-Share analysis technique based on competitive factors of the region, to find the failure has limitations.

• Journal of Ocean Engineering and Technology
• /
• v.33 no.6
• /
• pp.641-647
• /
• 2019

Yearly world vehicle production has continued to increase, and the global seaborne trade volumes also are recovering. Based on these positive trends, as demand for cargo ships increases in the freight transportation market, Pure car and truck carriers (PCTCs) with large gaps between decks continue to be ordered. The structural analysis of the cargo hold was performed in order to confirm its structural safety in accordance with the guidance for the direct strength assessment of the Korean Register (KR) of Shipping. And, according to the type of cargo, the maximum deflection and structurally weak area that occurred in deck 5 was confirmed. Also, it was found that the weight of the cargo had a significant effect on the deck, the primary members of the deck's structure, and pillars. The results of the structural analysis conducted in this study were added to the existing cargo load planning software. This was done so that the prediction of the maximum stress and the deflection of the deck based on the information about the cargo could be confirmed quickly. In addition, the data will be used as the basic data for rapid information management response to changes in cargo items.

• Environmental Analysis Health and Toxicology
• /
• v.30 no.sup
• /
• pp.6.1-6.4
• /
• 2015

Objectives This study is conducted to estimate the cost paid by the public suffering from disease possibly caused by chemical and to examine the effect on public health. Methods Cost-benefit analysis is an important factor in analysis and decision-making and is an important policy decision tool in many countries. Cost-of-illness (COI), a kind of scale-based analysis method, estimates the potential value lost as a result of illness as a monetary unit and calculates the cost in terms of direct, indirect and psychological costs. This study estimates direct medical costs, transportation fees for hospitalization and outpatient treatment, and nursing fees through a number of patients suffering from disease caused by chemicals in order to analyze COI, taking into account the cost of productivity loss as an indirect cost. Results The total yearly cost of the diseases studied in 2012 is calculated as 77 million Korean won (KRW) per person. The direct and indirect costs being 52 million KRW and 23 million KRW, respectively. Within the total cost of illness, mental and behavioral disability costs amounted to 16 million KRW, relevant blood immunological parameters costs were 7.4 million KRW, and disease of the nervous system costs were 6.7 million KRW. Conclusions This study reports on a survey conducted by experts regarding diseases possibly caused by chemicals and estimates the cost for the general public. The results can be used to formulate a basic report for a social-economic evaluation of the permitted use of chemicals and limits of usage.