• Archives of Plastic Surgery
• /
• v.41 no.3
• /
• pp.253-257
• /
• 2014

Background Although the utility of flaps for the treatment of sternal wound infections following median sternotomy has been reported for 30 years, there have been few reports on the risk factors for complications after reconstruction. The objective of this investigation was to identify factors related to complications after the reconstruction of sternal wound infections. Methods A retrospective analysis of 74 patients with reconstructive surgery after sternal wound infection over a 5-year period was performed. Clinical data including age, sex, body mass index (BMI), comorbidities, bacterial culture, previous cardiac surgery, wound depth, mortality rate, type of reconstructive procedure, and complication rate were collected. Results The patients' BMI ranged from 15.2 to $33.6kg/m^2$ (mean, $23.1{\pm}3.74kg/m^2$). Wound closure complications after reconstructive surgery were observed in 36.5% of the cases. The mortality rate was 2.7%. Diabetes mellitus significantly affected the rate of wound closure complications (P=0.041). A significant difference in the number of complications was seen between Staphylococcus aureus (S. aureus) and coagulase-negative Staphylococci (P=0.011). There was a correlation between harvesting of the internal thoracic artery and postoperative complications (P=0.048). The complication rates of the pectoralis major flap, rectus abdominis flap, omentum flap, a combination of pectoralis major flap and rectus abdominis flap, and direct closure were 23.3%, 33.3%, 100%, 37.5%, and 35.7%, respectively. Conclusions Diabetes mellitus, S. aureus, harvesting of the internal thoracic artery, and omentum flap were significant factors for complications after reconstruction. The omentum flap volume may be related to the complications associated with the omentum flap transfer in the present study.

• Korean Journal of Plant Tissue Culture
• /
• v.24 no.4
• /
• pp.239-256
• /
• 1997

Plants belonging to the category of 2n apomixis or agamospermy form embryos and seeds without the processes of normal meiosis and syngamy. Seeds produced in this way have identical genotype of their maternal parent. Three different types of agamospermy are recognized: diplospory, apospory, and adventitious (adventive) embryony. $F_1$ hybrid cultivars cannot be used as seed sources in the next ($F_2$) generation because this generation would be extremely variable as a result of genetic segregation. Hybrid vigor is also reduced in the $F_2$ generation. Therefore, parental stocks for hybrid seed production need to be maintained and cross must be continuously repeated. Agamospermic 2n apomixis would make it possible to fix the genotype of a superior variety so that clonal seeds faithfully representing that genotype could be continuously and cheaply produced independent of pollination. That is, $F_1$ hybrid seeds could be produced for many generations without loss of vigor or genotype alteration. Production of apomictic $F_1$ hybrid seed would be simplified because line isolation would not be necessary to produce seed or to maintain parental lines, and the use of male-sterile lines could be avoided. Overall, apomixis would enable a significant reduction in hybrid seed production costs. Additionally, the production of clonal seed is not only important for seed propagated crops, but also for the propagation of heterozygous fruit trees and timbers. Clonal seed would help avoid costly and time-consuming vegetative propagating methods that are currently used to ensure the large-scale production of these plants. Apomixis is scattered throughout the plant kingdom, but few important agricultural crops possess this trait Therefore, most research to date has centered on introgressing the trait of apomixis into agricultural crops such as wheat, maize, and some forage grasses from wild distant relatives by traditional cross breeding. The classical breeding approach, however is slow and often impeded by many breeding barriers. These problems could be surmounted by taking mutagenesis or molecular approach. Arabidopsis thaliana is a tiny sexually reproducing plant and is convenient in constructing and screening in molecular researches. Male-sterile mutants of Arabidopsis are particularly suitable genetic background for mutagenesis and screening for apomictic mutants. Molecular approaches towards isolating the genes controlling the apomictic process are feasible. Direct isolation of genes conferring apomixis development would greatly facilitate the transfer of this trait to wide variety of crops. Such studies are now in progress.

• Journal of environmental and Sanitary engineering
• /
• v.24 no.1
• /
• pp.1-12
• /
• 2009

The various environmental problems that we face on today are basically about environmental quality. Since early 1960s affluent material was produced because of remarkable economic growth by many cooperations. However, for the lack of environmental policy, environmental pollutions has been serious. The central government should transfer the producing and consuming structure to environmental affinity through the regulations for developing Korea as a model of environmental nation which takes an active part in global environmental programme and in which the environment and economy are well harmonized. Moreover, the central government should take the lead in prevention of environmental pollution through the direct policies such as strengthening the discharge limit or setting up environmental basic institutions by securing budget for conserving environment. This thesis emphasize on the public institution among many environmental basic institutions for environmental anti-pollution project. It will find the problems with running those institutions, and will suggest the preview of improvement. Also, it is necessary to investigate of variation trend for inflow and pollutant loading to environmental infrastructure as increased of the diffusion rate as established and maintenance of sewer system. The purpose of this study is to investigate for inflow and pollutant loading to environmental infrastructure, and also to provide the method of efficiently maintenance and management. The results obtained were summarized as follows; 1. Survey of actual condition on operation and management of environmental infrastructure was evaluated the propriety of treatment process and problem of plant management. 2. Analysis of pollutant loading contribution for river system of environmental infrastructure with data analysis of water quality measuring network. 3. To investigate on case study for efficiently maintenance and management of environmental infrastructure. The result on this study was provide the method of efficiently maintenance and management with survey for establish and repair of sewer system and survey of actual condition on operation and management of environmental infrastructure in the water area of discharge to Geum River System. Application as guideline for establish and management of environmental infrastructure, and management of Geum River System. Also, application for preliminary data for fulfill-assess of total effluent regulation of water pollution.

• Journal of the Korea Computer Graphics Society
• /
• v.24 no.1
• /
• pp.9-16
• /
• 2018

In this paper, we introduce a visualization framework for cell image data obtained from optical diffraction tomography (ODT), including a method for representing cell morphology in 3D virtual environment and a color mapping protocol. Unlike commonly known volume data sets, such as CT images of human organ or industrial machinery, that have solid structural information, the cell image data have rather vague information with much morphological variations on the boundaries. Therefore, it is difficult to come up with consistent representation of cell structure for visualization results. To obtain desired visual representation of cellular structures, we propose an interactive visualization technique for the ODT data. In visualization of 3D shape of the cell, we adopt a volume rendering technique which is generally applied to volume data visualization and improve the quality of volume rendering result by using empty space jittering method. Furthermore, we provide a layer-based independent rendering method for multiple transfer functions to represent two or more cellular structures in unified render window. In the experiment, we examined effectiveness of proposed method by visualizing various type of the cell obtained from the microscope which can capture ODT image and fluorescence image together.

• Journal of Environmental Health Sciences
• /
• v.28 no.2
• /
• pp.117-129
• /
• 2002

Concentration of welding fumes and their components is known to be hazardous to welder and adjacent worker. To determine the generation rates of metals in fumes, $CO_2$ flux cored arc welding on stainless steel was performed in well designed fume collection chamber. Variables were different products of flux cored wire(2 domestic products and 4 foreign products) and input energy(low-, optimal- , high input energy). Mass of welding fumes was determined by gravimetric method(NIOSH 0500 method), and 17 metals were analysed by inductively coupled plasm-atomic emission spectroscopy(NIOSH 7300 method). Flux cored wire tube and flux were analysed by scanning electron microscopy to determine their metal composition. 17 metals were classified by their generation rates. Generation rates of iron, manganese, potassium and sodium were all above 50mg/min at optimal input energy level. Generation rates of chromium and amorphous silica were 25~50mg/min. At 1~25mg/min level, nickel, titanium, molybdenum, and aluminum were included. Copper, zinc, calcium, lead, magnesium, lithium, and cobalt were generated below 1 mg/min. Generation rates of metal components in fumes were influenced by input energy, types of flux cored wire. Flux cored wire was consisted of outer shell tube and inner flux. Iron, chromium, and nickel were the major components of outer tube. Flux contained iron, chromium, nickel, potassium, sodium, silica, and manganese. The use of flux cored wire can increase the hazards by increasing the amounts of fumes formed relative to that of solid wire. The reason might be the direct transfer of elements from the flux, since the flux is fine power. Ratio of metals to the fume of flux cored wire was lower than that of solid wire because non-metal components of flux were transferred. Total metal content of fumes in flux cored arc welding was 47.4(24.3~57.2) percent that is much lower than that of solid wire, 75.9 percent. We found that generation rates of iron, manganese, chromium and nickel, all well known to cause work related disease to welder, increased more rapidly with increasing input energy than those of fumes. To reduce worker exposure to fumes and hazardous component at source, further research is needed to develop new welding filler materials that decrease both the amount of fumes and hazardous components.

• Journal of the Institute of Convergence Signal Processing
• /
• v.15 no.2
• /
• pp.70-75
• /
• 2014

Recently, the demand for high-integrated, low-powered, and high-powered SoC design has been increasing due to the multi-functionality and the miniaturization of digital devices and the high capacity of service informations. With the rapid evolution of the system, the required hardware performances have become diversified, the FPGA system has been increasingly adopted for the rapid verification, and SoC system using the FPGA and the ARM core for control has been growingly chosen. While the AXI bus is used in these kinds of systems in various ways, it is traditionally designed with AXI slave structure. In slave structure, there are problems with the CPU resources because CPU is continually involved in the data transfer and can't be used in other jobs, and with the decreased transmission efficiency because the time not used of AXI bus beomes longer. In this paper, an efficient AXI master interface is proposed to solve this problem. The simulation results show that the proposed system achieves reductions in the consumption clock by an average of 51.99% and in the slice by 31% and that the maximum operating frequency is increased to 107.84MHz by about 140%.

• The Journal of the Korea Contents Association
• /
• v.11 no.11
• /
• pp.102-110
• /
• 2011

This study is to reveal the meaning of the interaction between a player and a game with the approach of an operational interaction such as joystick and keyboard, and also a representational interaction that the player takes during the game. It has been usually recognized that cut-scene in existing games is just limited to the role of opening scene that delivers mainly a background story of the game, and has the only passive function that serves additionally the expression of the state of the player or the replay of the results of the player's action. But in the aspect of game-direction, the study of the player's action about the interaction movie of 'Uncharted2', for example, one of the most representative video games, shows the possible classification of interaction movie along with three functions(situation direction, induced selective-action, information transfer). As a result, it is judged that interaction movie is not an additional element for the game-play, but rather takes the function of as an interface. The effective application of interaction movie could help a smooth connection between the recognizability from the view point of the player and the playing from the main character's viewpoint, ultimately leading to a direct means to maximize the delivery of the story.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.24 no.6
• /
• pp.397-404
• /
• 1991

The steady state and decay characteristics of primary fluorescenece of phytoplanktons including Cyanophyceae and Cryptophyceae were investigated in vivo. At 580-640 nm region, fluorescence emission spectra were obtained from all algae examined. The observed fluorescence emission maxima were similiar$(\pm3\;nm)$ except Synechocorcus sp. (SYN). Considered $\lambda_{max}$ of emission spectra of phycobiliproteins and the excitation spectra with $\lambda_{max}=540-560nm$, it seems to be originated from biliproteins. Fluorescence lifetimes $(\tau)$ and decay curves were compared with standard solution of candidate organic compounds, b-phycoerythrin. The $\tau$ values obtained for phytoplankton with $\lambda_{max}=580nm$ were different depending upon the species of algae. The observed $\tau$ values were ranged from 1.39 ns to 1.95 ns. These are considerably shorter than $\tau(3.23\;us)$ for standard solution of b-phycoerythrin. The reduction of $\tau$ for phycoerythrin in vivo seems to be originated from effective energy transfer system between Chl. a and phycobiliprotein in intact cell. There are subtantial differences in fluorsecence spectra and lifetimes at the class level. At the species level, differences seems to be much smaller. The result of experiment suggests that measurement of fluorescence lifetimes may be helpful in the rapid characterization of algae. Direct application will likely be found in combination with the measurement of other luminescence parameters.

• Journal of the Korean Chemical Society
• /
• v.45 no.5
• /
• pp.442-447
• /
• 2001

The charge-transfer compound (OMTTF)AuCl$_4$ was prepared from the direct reaction of octamethylenethiafulvalene (OMTTF) with HAuCl$_4{\cdot}xH_2$O in THF. (OMTTF)$_2PtCl_4$, (OMTTF)_2IrCl_6{\cdot}2H_2$O, and (OMTTF)Os$Cl_5{\cdot}THF$ were also formed using $H_2PtCl_6{\cdot}xH_2O$, $H_2IrCl_6{\cdot}xH_2O$ and $H_2OsCl_6$, respectively. The prepared compounds were characterized by magnetic (EPR, magnetic susceptibility), spectroscopic (IR, UV-Vis), electrochemical (CV) methods, and the powdered electrical conductivity measurement. The powdered electrical conductivities at room temperature were ~$10^{-7}S{\cdot}cm^{-1}$. The experimental results show that $OMTTF^+$ monocation radicals exist in all of the prepared compounds. The redox potential of OMTTF supports that $OMTTF^+$ is relatively stable. The magnetic properties indicate that there are significant magnetic interactions between the localized odd electrons on the central metal (Ir and Os) ions and the odd electrons resided on $OMTTF^+$ cation radicals in both (OMTTF) $_2IrCl_6{\cdot}2H_2O$ and (OMTTF)$OsCl_5{\cdot}THF$.

• Plant Biotechnology Reports
• /
• v.2 no.2
• /
• pp.163-169
• /
• 2008

Roots of Ophiorrhiza prostrata D. Don serve as a rich source of camptothecin (CPT), an anticancer drug. Because of the large-scale collection of its roots, the plant has become a threatened species. The present study accomplishes the induction of adventitious roots as a means for the production of CPT as well as for the large-scale propagation of this anticancer drug plant using leaf and internode explants. The biomass yield and CPT content of adventitious roots induced from different explants were compared to roots developed on ex vitro rooted stem cuttings. Adventitious roots were produced on half-strength Murashige and Skoog (MS) medium supplemented with $10.74{\mu}M$ ${\alpha}-naphthaleneacetic$ acid and $2.32{\mu}M$ kinetin at mean fresh weights of 0.753, 0.739 and 0.748 g roots from leaf, internode and shoot, respectively. CPT yield from in vitro derived roots after 50, 80 and 120 days of incubation (0.028, 0.06 and 0.1% dry weight, respectively) was not significantly different from those harvested at the same age from ex vitro rooted (0.03, 0.06 and 0.13%, respectively) stem cuttings. CPT from subcultured roots derived from solid (0.08%) medium was lower than from suspension culture medium (0.12%). Subsequent cultures of the adventitious roots showed a stable production of CPT (0.16%). The yield of CPT from 360-day-old plant-derived roots was 0.19%. Elicitation using methyl jasmonate and acetyl salicylic acid exhibited no enhancement in CPT yield. In vitro propagation through direct shoot regeneration was achieved from the adventitious roots upon transfer to MS medium with $8.87{\mu}M$ $N^6-benzyladenine$ (BA) and $2.46{\mu}M$ indole-3-butyric acid (IBA) with a mean of 21.2 shoots per culture in 50 days. The shoots upon subculture on medium having the same level of BA and IBA underwent rapid proliferation. The shoots transferred to field conditions after in vitro rooting exhibited 95% survival. Adventitious root induction, from leaf and internode explants, enables the feasible production of CPT as well as the large-scale rapid propagation of this species which can safeguard it from extinction.