• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.4
• /
• pp.39-45
• /
• 2012

Today gasoline engines for vehicular application are not only faced with stringent emission regulation but also with increasing requirements to better fuel economy, while guaranteeing power density. The spray-guided type gasoline direct injection (GDI) engine has an advantage of improved thermal efficiency and lower harmful emissions. Centrally mounted high pressure injector and adjacent spark plug allow stable lean combustion due to the flexible mixture stratification. In the present study, the performance and emissions characteristics of developed spray-guided type GDI combustion system were evaluated at various excess air ratio conditions. The specific fuel consumption and nitrogen oxides ($NO_x$) emissions were reduced due to the achievement of stable lean combustion under flammability limit. Multiple injection strategy was not helpful to improve fuel consumption while further reduction of $NO_x$ emissions was possible.

• The Journal of Industrial Distribution & Business
• /
• v.10 no.12
• /
• pp.7-14
• /
• 2019

Purpose: In Korea, win-win growth policy has been successfully implemented in supply chain and logistics management. In the policy, it is recommended to support supply chain partners with various mechanisms including financial and technical aids. This study attempts to scientifically analyze the effects of direct and indirect win-win growth policy factors on supply chain and logistics management performance through partnership factors. Research design, data and methodology: This study builds a structural equation model reflecting the relationship between the win-win growth policy, partnership and performance factors. The proposed model is verified with the PLS (Partial Least Squares regression) methodology. Data from shipper and logistics companies were collected and analyzed by the PLS model. Results: The analysis showed that both direct and indirect policy factors are meaningful to improve supply chain and logistics performance. Indirect support factors including R&D, management innovation, human resources development and educational supports have positive impacts on partnership factors. Direct support factors including financial aids and fairness also have positive impacts on the performance. Conclusions: This study is meaningful in that it suggests a turning point in which supply chain Win-win growth and partnership efforts are perceived as new value-creating mechanism rather than unilateral cost reduction for logistics industry.

• Korean Journal of Weed Science
• /
• v.12 no.3
• /
• pp.292-308
• /
• 1992

Recently agricultural situations are being placed in unfavourable socio-economic environment as followed by rapid decrease of rural population, poor labor quality and high wages of rural society due to high speedy industrialization of social structure in Korea. In addition to those circumstances, under the UR system to be expected in the early future, free trade of agricultural products will be faced inevitably in Korea. Practically prices of rice as a principle food in this country are expensive about three times compared to those of foreign rice markets, and so how to increase the international competitiveness and food supplies are important problems to be solved rapidly. Accordingly an urgent goal is reduction of agricultural production cost by the improvement of labour productivity as a labour saving and cost down cultivation methods as the direct seeding cultivation in rice. But there are many problems in the direct seeded rice cultivation. The important things to be improved in that cultivation are development of rice varieties with lodging tolerance, effective seedling stand, weed control, irrigation management and fertilizing and so on. Moreover agricultural basis as irrigation facilities, land consolidation and farm machineries must be improved for the stability of rice cultivation in the future.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.6
• /
• pp.30-39
• /
• 2001

The direct injection into the cylinders has been regarded as a way of the reduction in fuel consumption and pollutant emissions. The spray produced by the high pressure injector is of paramount importance in DISI(Direct Injection Spark Ignition) engines in that the primary atomization process must meet the requirement of quick and complete evaporation, mixing with air and combustion especially to prohibit the excessive HC emissions. The interaction between air flow and fuel spray was investigated in a steady flow system embodied in a wind tunnel to simulate the variety of flow inside the cylinder of the DISI engine. The direct Mie scattered and shadowgraph images presented the macroscopic view of the liquid sprays and vapor fields. The velocity and particle size of fuel droplets were investigated by phase doppler anenometer(PDA) system. The processes of atomization and evaporation with a DISI injector were observed and consequently utilized to construct the data-base for the spray and fuel-air mixing mechanism as a function of the flow characteristics.

• Journal of ILASS-Korea
• /
• v.10 no.3
• /
• pp.38-44
• /
• 2005

The direct injection into the cylinders has been regarded as a way of the reduction in fuel consumption and pollutant emissions. The spray produced from the injector of DIS(Direct Injection Spark Ignition) engine is of paramount importance in DISI engines. Fan-spray injector as well as swirl-spray injector was developed and utilized to the DISI engines. The interaction between air flow and fuel spray was investigated in a steady flow system embodied in a wind tunnel to simulate the variety of flow inside the cylinder of the DISI engineer. The direct Mie scattered images presented the macroscopic view of the liquid spray fields interacted with crossflow. Particle sizes of fuel droplets were measured with phase Doppler anemometer(PDA) system. A faster cross-flow field made SMD larger and $D_{10}$ smaller. The experiments show the interaction of air flow field and the fuel spray field of fan-spray. The results can be utilized to construct the data-base for the spray and fuel-air mixing mechanism as a function of the flow characteristics.

• Journal of ILASS-Korea
• /
• v.23 no.1
• /
• pp.22-29
• /
• 2018

The purpose of this study is to investigate the macroscopic spray characteristics and spray pattern of a gasoline direct injection (GDI) injector according to the increase of injection pressure. The macroscopic spray characteristics, such as a spray tip penetration and spray angle, were measured and analyzed from the frozen spray images, which are obtained from the spray visualization system including the high-speed camera, light-source, long-distance microscope (LDM). The spray pattern was analyzed through the deviation of the center of the spray plum and images were acquired using Nd: YAG Laser and ICCD(Intensified charge coupled device) camera. From the experiment and analysis, it revealed that the injection pressure have a significant influence on the spray tip penetration and spray pattern. However, the injection pressure have little influence on the spray angle. The increase of injection pressure induced the reduction of a closing delay. In addition, the deviation of spray center increase with the increase of injection pressure and the distance from a nozzle tip.

• Journal of Environmental Science International
• /
• v.21 no.10
• /
• pp.1203-1212
• /
• 2012

Yongsan ward is located at central place connecting south and north ecology axis of seoul. Various environment-friendly Yongsan development could pose positive effects on NPS(non pollutant source) pollutant reductions and water quality improvement at Han-rive because BOD, T-N, and T-P NPS discharges took 90% of total pollutant from this area. In this study, direct runoff and NPS pollutant loads were evaluated before and after development using spatio-tamporal change in CN(curve number) and EMC(event mean concentration) data. It was found that direct runoff value is $23,584,724m^3$, and BOD, T-N and T-P loads are 104,456 kg/year, 111,483 kg/year and 7,500 kg/year under pre-development condition, respectively. Annual runoff, BOD, T-N and T-P reducing rate were 12.9%, 33.3%, 35.6% and 40.7% under integrated post-development condition, respectively. Based on the results obtained in this study, environment-friendly urban development could be achieved at Yongsan area.

• Journal of Advanced Marine Engineering and Technology
• /
• v.26 no.2
• /
• pp.256-263
• /
• 2002

The Boil-Off-Gases(BOG) in the LNG production terminal are continuously generated during the unloading, storage and supply processes by the heat penetration. In order to use these gases as useful fuel, the reliquefaction process should be installed to put the reliquefied BOG in the main LNG supply line before the secondary pump in terminal. The current reliquefaction method of BOG in LNG terminal is the direct contact one between LNG and BOG in the absorption column. But the system has severe disadvantage, which is the 10 times of LNG circulation needed for unit mass of BOG reliquefaction. It causes, therefore, high power consumption of LNG circulation pump and excessive city-gas supply, even if short demand of NG is needed in the summer time. In this paper, the new reliquefaction system of BOG by using LNG cold energy with indirect contact in precooler was suggested and analysed. The result showed new indirect contact method of BOG reliquefaction system between LNG cold energy and BOG is much more effective than the current direct contact one because of only about 1.3 times of LNG circulation needed and higher energy saving by pump power reduction.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.3013-3018
• /
• 2008

Supercharging system was adopted to investigate the influence of boost pressure on operating range, brake specific fuel consumption (BSFC) and exhaust emissions by using a supercharger at low temperature diesel combustion (LTC) condition in a 5-cylinder 2.7 L direct injection diesel engine. The experimental parameters such as injection quantity, injection timing, injection pressure and exhaust gas recirculation (EGR) rate were varied to find maximum operating range. The result showed that operating range with boost was expanded up to 41.9% compared to naturally aspirated LTC condition due to increased mixing intensity. The boosted LTC engine showed low BSFC value and dramatically reduced soot emission under all operating range compared with high speed direct injection (HSDI) mode. Finally, this paper presents the boosted LTC map of emission and the strategy of improved engine operating range.

• Journal of The Korean Society of Integrative Medicine
• /
• v.7 no.3
• /
• pp.33-40
• /
• 2019

Purpose : The purpose of this randomized controlled trial study was to examine the effect of transcranial direct current stimulation (tDCS) on cognitive function and depression in stroke patients. Methods : Thirty stroke patients were randomly divided into an experimental group (n = 15) and a control group (n = 15). The experimental group received tDCS while performing computerized cognitive rehabilitation programs, and the control group was provided with sham tDCS while operating the same programs. The 30-minute intervention was implemented five times per week for six weeks. To assess cognitive function before and after the intervention, the Neurobehavioral Cognitive Status Examination was conducted; the Beck Depression Inventory BDI was employed to assess depression. Results : The experimental group showed statistically significant increases in cognitive function and decreases in depression (p < .05 ). Comparing the amount of variation between the groups after arbitration also showed significant differences in cognitive function and depression between the two groups (p > .05). Conclusion : The application of tDCS and computerized cognitive rehabilitation programs for stroke patients may positively affect their cognitive function and depression. Therefore, tDCS used with computerized cognitive rehabilitation programs is positively applicable to the enhancement of cognitive function in stroke patients and reduction of depression.